[ aws . cloudwatch ]

put-metric-data

Description

Publishes metric data points to Amazon CloudWatch. CloudWatch associates the data points with the specified metric. If the specified metric does not exist, CloudWatch creates the metric. When CloudWatch creates a metric, it can take up to fifteen minutes for the metric to appear in calls to ListMetrics .

You can publish either individual data points in the Value field, or arrays of values and the number of times each value occurred during the period by using the Values and Counts fields in the MetricDatum structure. Using the Values and Counts method enables you to publish up to 150 values per metric with one PutMetricData request, and supports retrieving percentile statistics on this data.

Each PutMetricData request is limited to 40 KB in size for HTTP POST requests. You can send a payload compressed by gzip. Each request is also limited to no more than 20 different metrics.

Although the Value parameter accepts numbers of type Double , CloudWatch rejects values that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special values (for example, NaN, +Infinity, -Infinity) are not supported.

You can use up to 10 dimensions per metric to further clarify what data the metric collects. Each dimension consists of a Name and Value pair. For more information about specifying dimensions, see Publishing Metrics in the Amazon CloudWatch User Guide .

Data points with time stamps from 24 hours ago or longer can take at least 48 hours to become available for GetMetricData or GetMetricStatistics from the time they are submitted. Data points with time stamps between 3 and 24 hours ago can take as much as 2 hours to become available for for GetMetricData or GetMetricStatistics .

CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set instead, you can only retrieve percentile statistics for this data if one of the following conditions is true:

  • The SampleCount value of the statistic set is 1 and Min , Max , and Sum are all equal.

  • The Min and Max are equal, and Sum is equal to Min multiplied by SampleCount .

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  put-metric-data
--namespace <value>
[--metric-data <value>]
[--metric-name <value>]
[--timestamp <value>]
[--unit <value>]
[--value <value>]
[--dimensions <value>]
[--statistic-values <value>]
[--storage-resolution <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--cli-auto-prompt <value>]

Options

--namespace (string)

The namespace for the metric data.

To avoid conflicts with AWS service namespaces, you should not specify a namespace that begins with AWS/

--metric-data (list)

The data for the metric. The array can include no more than 20 metrics per call.

(structure)

Encapsulates the information sent to either create a metric or add new values to be aggregated into an existing metric.

MetricName -> (string)

The name of the metric.

Dimensions -> (list)

The dimensions associated with the metric.

(structure)

Expands the identity of a metric.

Name -> (string)

The name of the dimension.

Value -> (string)

The value representing the dimension measurement.

Timestamp -> (timestamp)

The time the metric data was received, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

Value -> (double)

The value for the metric.

Although the parameter accepts numbers of type Double, CloudWatch rejects values that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special values (for example, NaN, +Infinity, -Infinity) are not supported.

StatisticValues -> (structure)

The statistical values for the metric.

SampleCount -> (double)

The number of samples used for the statistic set.

Sum -> (double)

The sum of values for the sample set.

Minimum -> (double)

The minimum value of the sample set.

Maximum -> (double)

The maximum value of the sample set.

Values -> (list)

Array of numbers representing the values for the metric during the period. Each unique value is listed just once in this array, and the corresponding number in the Counts array specifies the number of times that value occurred during the period. You can include up to 150 unique values in each PutMetricData action that specifies a Values array.

Although the Values array accepts numbers of type Double , CloudWatch rejects values that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special values (for example, NaN, +Infinity, -Infinity) are not supported.

(double)

Counts -> (list)

Array of numbers that is used along with the Values array. Each number in the Count array is the number of times the corresponding value in the Values array occurred during the period.

If you omit the Counts array, the default of 1 is used as the value for each count. If you include a Counts array, it must include the same amount of values as the Values array.

(double)

Unit -> (string)

When you are using a Put operation, this defines what unit you want to use when storing the metric.

In a Get operation, this displays the unit that is used for the metric.

StorageResolution -> (integer)

Valid values are 1 and 60. Setting this to 1 specifies this metric as a high-resolution metric, so that CloudWatch stores the metric with sub-minute resolution down to one second. Setting this to 60 specifies this metric as a regular-resolution metric, which CloudWatch stores at 1-minute resolution. Currently, high resolution is available only for custom metrics. For more information about high-resolution metrics, see High-Resolution Metrics in the Amazon CloudWatch User Guide .

This field is optional, if you do not specify it the default of 60 is used.

Shorthand Syntax:

MetricName=string,Dimensions=[{Name=string,Value=string},{Name=string,Value=string}],Timestamp=timestamp,Value=double,StatisticValues={SampleCount=double,Sum=double,Minimum=double,Maximum=double},Values=double,double,Counts=double,double,Unit=string,StorageResolution=integer ...

JSON Syntax:

[
  {
    "MetricName": "string",
    "Dimensions": [
      {
        "Name": "string",
        "Value": "string"
      }
      ...
    ],
    "Timestamp": timestamp,
    "Value": double,
    "StatisticValues": {
      "SampleCount": double,
      "Sum": double,
      "Minimum": double,
      "Maximum": double
    },
    "Values": [double, ...],
    "Counts": [double, ...],
    "Unit": "Seconds"|"Microseconds"|"Milliseconds"|"Bytes"|"Kilobytes"|"Megabytes"|"Gigabytes"|"Terabytes"|"Bits"|"Kilobits"|"Megabits"|"Gigabits"|"Terabits"|"Percent"|"Count"|"Bytes/Second"|"Kilobytes/Second"|"Megabytes/Second"|"Gigabytes/Second"|"Terabytes/Second"|"Bits/Second"|"Kilobits/Second"|"Megabits/Second"|"Gigabits/Second"|"Terabits/Second"|"Count/Second"|"None",
    "StorageResolution": integer
  }
  ...
]

--metric-name (string) The name of the metric.

--timestamp (string) The time stamp used for the metric. If not specified, the default value is set to the time the metric data was received.

--unit (string) The unit of metric.

--value (string) The value for the metric. Although the –value parameter accepts numbers of type Double, Amazon CloudWatch truncates values with very large exponents. Values with base-10 exponents greater than 126 (1 x 10^126) are truncated. Likewise, values with base-10 exponents less than -130 (1 x 10^-130) are also truncated.

--dimensions (string) The –dimensions argument further expands on the identity of a metric using a Name=Value pair, separated by commas, for example: --dimensions InstanceID=1-23456789,InstanceType=m1.small . Note that the --dimensions argument has a different format when used in get-metric-data , where for the same example you would use the format --dimensions Name=InstanceID,Value=i-aaba32d4 Name=InstanceType,value=m1.small .

--statistic-values (string) A set of statistical values describing the metric.

--storage-resolution (string)

Valid values are 1 and 60. Setting this to 1 specifies this metric as a high-resolution metric, so that CloudWatch stores the metric with sub-minute resolution down to one second. Setting this to 60 specifies this metric as a regular-resolution metric, which CloudWatch stores at 1-minute resolution. Currently, high resolution is available only for custom metrics. For more information about high-resolution metrics, see High-Resolution Metrics in the Amazon CloudWatch User Guide .

This field is optional, if you do not specify it the default of 60 is used.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

--cli-auto-prompt (boolean) Automatically prompt for CLI input parameters.

See ‘aws help’ for descriptions of global parameters.

Examples

To publish a custom metric to Amazon CloudWatch

The following example uses the put-metric-data command to publish a custom metric to Amazon CloudWatch:

aws cloudwatch put-metric-data --namespace "Usage Metrics" --metric-data file://metric.json

The values for the metric itself are stored in the JSON file, metric.json.

Here are the contents of that file:

[
  {
    "MetricName": "New Posts",
    "Timestamp": "Wednesday, June 12, 2013 8:28:20 PM",
    "Value": 0.50,
    "Unit": "Count"
  }
]

For more information, see Publishing Custom Metrics in the Amazon CloudWatch Developer Guide.

To specify multiple dimensions

The following example illustrates how to specify multiple dimensions. Each dimension is specified as a Name=Value pair. Multiple dimensions are separated by a comma.:

aws cloudwatch put-metric-data --metric-name Buffers --namespace MyNameSpace --unit Bytes --value 231434333 --dimensions InstanceID=1-23456789,InstanceType=m1.small

Output

None