request-spot-instances¶

Description¶

Creates a Spot Instance request.

For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances .

Synopsis¶

  request-spot-instances
[--availability-zone-group <value>]
[--block-duration-minutes <value>]
[--client-token <value>]
[--dry-run | --no-dry-run]
[--instance-count <value>]
[--launch-group <value>]
[--launch-specification <value>]
[--spot-price <value>]
[--type <value>]
[--valid-from <value>]
[--valid-until <value>]
[--tag-specifications <value>]
[--instance-interruption-behavior <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--cli-auto-prompt <value>]

Options¶

--availability-zone-group (string)

The user-specified name for a logical grouping of requests.

When you specify an Availability Zone group in a Spot Instance request, all Spot Instances in the request are launched in the same Availability Zone. Instance proximity is maintained with this parameter, but the choice of Availability Zone is not. The group applies only to requests for Spot Instances of the same instance type. Any additional Spot Instance requests that are specified with the same Availability Zone group name are launched in that same Availability Zone, as long as at least one instance from the group is still active.

If there is no active instance running in the Availability Zone group that you specify for a new Spot Instance request (all instances are terminated, the request is expired, or the maximum price you specified falls below current Spot price), then Amazon EC2 launches the instance in any Availability Zone where the constraint can be met. Consequently, the subsequent set of Spot Instances could be placed in a different zone from the original request, even if you specified the same Availability Zone group.

Default: Instances are launched in any available Availability Zone.

--block-duration-minutes (integer)

The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360).

The duration period starts as soon as your Spot Instance receives its instance ID. At the end of the duration period, Amazon EC2 marks the Spot Instance for termination and provides a Spot Instance termination notice, which gives the instance a two-minute warning before it terminates.

You can’t specify an Availability Zone group or a launch group if you specify a duration.

--client-token (string)

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency in the Amazon EC2 User Guide for Linux Instances .

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--instance-count (integer)

The maximum number of Spot Instances to launch.

Default: 1

--launch-group (string)

The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

Default: Instances are launched and terminated individually

--launch-specification (structure)

The launch specification.

SecurityGroupIds -> (list)

One or more security group IDs.

(string)

SecurityGroups -> (list)

One or more security groups. When requesting instances in a VPC, you must specify the IDs of the security groups. When requesting instances in EC2-Classic, you can specify the names or the IDs of the security groups.

(string)

AddressingType -> (string)

Deprecated.

BlockDeviceMappings -> (list)

One or more block device mapping entries. You can’t specify both a snapshot ID and an encryption value. This is because only blank volumes can be encrypted on creation. If a snapshot is the basis for a volume, it is not blank and its encryption status is used for the volume encryption status.

(structure)

Describes a block device mapping.

DeviceName -> (string)

The device name (for example, /dev/sdh or xvdh ).

VirtualName -> (string)

The virtual device name (ephemeral N). Instance store volumes are numbered starting from 0. An instance type with 2 available instance store volumes can specify mappings for ephemeral0 and ephemeral1 . The number of available instance store volumes depends on the instance type. After you connect to the instance, you must mount the volume.

NVMe instance store volumes are automatically enumerated and assigned a device name. Including them in your block device mapping has no effect.

Constraints: For M3 instances, you must specify instance store volumes in the block device mapping for the instance. When you launch an M3 instance, we ignore any instance store volumes specified in the block device mapping for the AMI.

Ebs -> (structure)

Parameters used to automatically set up EBS volumes when the instance is launched.

DeleteOnTermination -> (boolean)

Indicates whether the EBS volume is deleted on instance termination. For more information, see Preserving Amazon EBS volumes on instance termination in the Amazon Elastic Compute Cloud User Guide.

Iops -> (integer)

The number of I/O operations per second (IOPS) that the volume supports. For io1 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide .

Constraints: Range is 100-16,000 IOPS for gp2 volumes and 100 to 64,000IOPS for io1 volumes in most Regions. Maximum io1 IOPS of 64,000 is guaranteed only on Nitro-based instances . Other instance families guarantee performance up to 32,000 IOPS. For more information, see Amazon EBS Volume Types in the Amazon Elastic Compute Cloud User Guide .

Condition: This parameter is required for requests to create io1 volumes; it is not used in requests to create gp2 , st1 , sc1 , or standard volumes.

SnapshotId -> (string)

The ID of the snapshot.

VolumeSize -> (integer)

The size of the volume, in GiB.

Default: If you’re creating the volume from a snapshot and don’t specify a volume size, the default is the snapshot size.

Constraints: 1-16384 for General Purpose SSD (gp2 ), 4-16384 for Provisioned IOPS SSD (io1 ), 500-16384 for Throughput Optimized HDD (st1 ), 500-16384 for Cold HDD (sc1 ), and 1-1024 for Magnetic (standard ) volumes. If you specify a snapshot, the volume size must be equal to or larger than the snapshot size.

VolumeType -> (string)

The volume type. If you set the type to io1 , you must also specify the Iops parameter. If you set the type to gp2 , st1 , sc1 , or standard , you must omit the Iops parameter.

Default: gp2

KmsKeyId -> (string)

Identifier (key ID, key alias, ID ARN, or alias ARN) for a customer managed CMK under which the EBS volume is encrypted.

This parameter is only supported on BlockDeviceMapping objects called by RunInstances , RequestSpotFleet , and RequestSpotInstances .

Encrypted -> (boolean)

Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Amazon EBS Encryption in the Amazon Elastic Compute Cloud User Guide .

In no case can you remove encryption from an encrypted volume.

Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types .

This parameter is not returned by .

NoDevice -> (string)

Suppresses the specified device included in the block device mapping of the AMI.

EbsOptimized -> (boolean)

Indicates whether the instance is optimized for EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal EBS I/O performance. This optimization isn’t available with all instance types. Additional usage charges apply when using an EBS Optimized instance.

Default: false

IamInstanceProfile -> (structure)

The IAM instance profile.

Arn -> (string)

The Amazon Resource Name (ARN) of the instance profile.

Name -> (string)

The name of the instance profile.

ImageId -> (string)

The ID of the AMI.

InstanceType -> (string)

The instance type.

KernelId -> (string)

The ID of the kernel.

KeyName -> (string)

The name of the key pair.

Monitoring -> (structure)

Indicates whether basic or detailed monitoring is enabled for the instance.

Default: Disabled

Enabled -> (boolean)

Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.

NetworkInterfaces -> (list)

One or more network interfaces. If you specify a network interface, you must specify subnet IDs and security group IDs using the network interface.

(structure)

Describes a network interface.

AssociatePublicIpAddress -> (boolean)

Indicates whether to assign a public IPv4 address to an instance you launch in a VPC. The public IP address can only be assigned to a network interface for eth0, and can only be assigned to a new network interface, not an existing one. You cannot specify more than one network interface in the request. If launching into a default subnet, the default value is true .

DeleteOnTermination -> (boolean)

If set to true , the interface is deleted when the instance is terminated. You can specify true only if creating a new network interface when launching an instance.

Description -> (string)

The description of the network interface. Applies only if creating a network interface when launching an instance.

DeviceIndex -> (integer)

The position of the network interface in the attachment order. A primary network interface has a device index of 0.

If you specify a network interface when launching an instance, you must specify the device index.

Groups -> (list)

The IDs of the security groups for the network interface. Applies only if creating a network interface when launching an instance.

(string)

Ipv6AddressCount -> (integer)

A number of IPv6 addresses to assign to the network interface. Amazon EC2 chooses the IPv6 addresses from the range of the subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you’ve specified a minimum number of instances to launch.

Ipv6Addresses -> (list)

One or more IPv6 addresses to assign to the network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you’ve specified a minimum number of instances to launch.

(structure)

Describes an IPv6 address.

Ipv6Address -> (string)

The IPv6 address.

NetworkInterfaceId -> (string)

The ID of the network interface.

If you are creating a Spot Fleet, omit this parameter because you can’t specify a network interface ID in a launch specification.

PrivateIpAddress -> (string)

The private IPv4 address of the network interface. Applies only if creating a network interface when launching an instance. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

PrivateIpAddresses -> (list)

One or more private IPv4 addresses to assign to the network interface. Only one private IPv4 address can be designated as primary. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

(structure)

Describes a secondary private IPv4 address for a network interface.

Primary -> (boolean)

Indicates whether the private IPv4 address is the primary private IPv4 address. Only one IPv4 address can be designated as primary.

PrivateIpAddress -> (string)

The private IPv4 addresses.

SecondaryPrivateIpAddressCount -> (integer)

The number of secondary private IPv4 addresses. You can’t specify this option and specify more than one private IP address using the private IP addresses option. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

SubnetId -> (string)

The ID of the subnet associated with the network interface. Applies only if creating a network interface when launching an instance.

InterfaceType -> (string)

The type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa . For more information, see Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide .

If you are not creating an EFA, specify interface or omit this parameter.

Valid values: interface | efa

Placement -> (structure)

The placement information for the instance.

AvailabilityZone -> (string)

The Availability Zone.

[Spot Fleet only] To specify multiple Availability Zones, separate them using commas; for example, “us-west-2a, us-west-2b”.

GroupName -> (string)

The name of the placement group.

Tenancy -> (string)

The tenancy of the instance (if the instance is running in a VPC). An instance with a tenancy of dedicated runs on single-tenant hardware. The host tenancy is not supported for Spot Instances.

RamdiskId -> (string)

The ID of the RAM disk.

SubnetId -> (string)

The IDs of the subnets in which to launch the instance. To specify multiple subnets, separate them using commas; for example, “subnet-1234abcdeexample1, subnet-0987cdef6example2”.

UserData -> (string)

The Base64-encoded user data for the instance. User data is limited to 16 KB.

JSON Syntax:

{
  "SecurityGroupIds": ["string", ...],
  "SecurityGroups": ["string", ...],
  "AddressingType": "string",
  "BlockDeviceMappings": [
    {
      "DeviceName": "string",
      "VirtualName": "string",
      "Ebs": {
        "DeleteOnTermination": true|false,
        "Iops": integer,
        "SnapshotId": "string",
        "VolumeSize": integer,
        "VolumeType": "standard"|"io1"|"gp2"|"sc1"|"st1",
        "KmsKeyId": "string",
        "Encrypted": true|false
      },
      "NoDevice": "string"
    }
    ...
  ],
  "EbsOptimized": true|false,
  "IamInstanceProfile": {
    "Arn": "string",
    "Name": "string"
  },
  "ImageId": "string",
  "InstanceType": "t1.micro"|"t2.nano"|"t2.micro"|"t2.small"|"t2.medium"|"t2.large"|"t2.xlarge"|"t2.2xlarge"|"t3.nano"|"t3.micro"|"t3.small"|"t3.medium"|"t3.large"|"t3.xlarge"|"t3.2xlarge"|"t3a.nano"|"t3a.micro"|"t3a.small"|"t3a.medium"|"t3a.large"|"t3a.xlarge"|"t3a.2xlarge"|"m1.small"|"m1.medium"|"m1.large"|"m1.xlarge"|"m3.medium"|"m3.large"|"m3.xlarge"|"m3.2xlarge"|"m4.large"|"m4.xlarge"|"m4.2xlarge"|"m4.4xlarge"|"m4.10xlarge"|"m4.16xlarge"|"m2.xlarge"|"m2.2xlarge"|"m2.4xlarge"|"cr1.8xlarge"|"r3.large"|"r3.xlarge"|"r3.2xlarge"|"r3.4xlarge"|"r3.8xlarge"|"r4.large"|"r4.xlarge"|"r4.2xlarge"|"r4.4xlarge"|"r4.8xlarge"|"r4.16xlarge"|"r5.large"|"r5.xlarge"|"r5.2xlarge"|"r5.4xlarge"|"r5.8xlarge"|"r5.12xlarge"|"r5.16xlarge"|"r5.24xlarge"|"r5.metal"|"r5a.large"|"r5a.xlarge"|"r5a.2xlarge"|"r5a.4xlarge"|"r5a.8xlarge"|"r5a.12xlarge"|"r5a.16xlarge"|"r5a.24xlarge"|"r5d.large"|"r5d.xlarge"|"r5d.2xlarge"|"r5d.4xlarge"|"r5d.8xlarge"|"r5d.12xlarge"|"r5d.16xlarge"|"r5d.24xlarge"|"r5d.metal"|"r5ad.large"|"r5ad.xlarge"|"r5ad.2xlarge"|"r5ad.4xlarge"|"r5ad.8xlarge"|"r5ad.12xlarge"|"r5ad.16xlarge"|"r5ad.24xlarge"|"r6g.metal"|"r6g.medium"|"r6g.large"|"r6g.xlarge"|"r6g.2xlarge"|"r6g.4xlarge"|"r6g.8xlarge"|"r6g.12xlarge"|"r6g.16xlarge"|"x1.16xlarge"|"x1.32xlarge"|"x1e.xlarge"|"x1e.2xlarge"|"x1e.4xlarge"|"x1e.8xlarge"|"x1e.16xlarge"|"x1e.32xlarge"|"i2.xlarge"|"i2.2xlarge"|"i2.4xlarge"|"i2.8xlarge"|"i3.large"|"i3.xlarge"|"i3.2xlarge"|"i3.4xlarge"|"i3.8xlarge"|"i3.16xlarge"|"i3.metal"|"i3en.large"|"i3en.xlarge"|"i3en.2xlarge"|"i3en.3xlarge"|"i3en.6xlarge"|"i3en.12xlarge"|"i3en.24xlarge"|"i3en.metal"|"hi1.4xlarge"|"hs1.8xlarge"|"c1.medium"|"c1.xlarge"|"c3.large"|"c3.xlarge"|"c3.2xlarge"|"c3.4xlarge"|"c3.8xlarge"|"c4.large"|"c4.xlarge"|"c4.2xlarge"|"c4.4xlarge"|"c4.8xlarge"|"c5.large"|"c5.xlarge"|"c5.2xlarge"|"c5.4xlarge"|"c5.9xlarge"|"c5.12xlarge"|"c5.18xlarge"|"c5.24xlarge"|"c5.metal"|"c5a.large"|"c5a.xlarge"|"c5a.2xlarge"|"c5a.4xlarge"|"c5a.8xlarge"|"c5a.12xlarge"|"c5a.16xlarge"|"c5a.24xlarge"|"c5d.large"|"c5d.xlarge"|"c5d.2xlarge"|"c5d.4xlarge"|"c5d.9xlarge"|"c5d.12xlarge"|"c5d.18xlarge"|"c5d.24xlarge"|"c5d.metal"|"c5n.large"|"c5n.xlarge"|"c5n.2xlarge"|"c5n.4xlarge"|"c5n.9xlarge"|"c5n.18xlarge"|"c6g.metal"|"c6g.medium"|"c6g.large"|"c6g.xlarge"|"c6g.2xlarge"|"c6g.4xlarge"|"c6g.8xlarge"|"c6g.12xlarge"|"c6g.16xlarge"|"cc1.4xlarge"|"cc2.8xlarge"|"g2.2xlarge"|"g2.8xlarge"|"g3.4xlarge"|"g3.8xlarge"|"g3.16xlarge"|"g3s.xlarge"|"g4dn.xlarge"|"g4dn.2xlarge"|"g4dn.4xlarge"|"g4dn.8xlarge"|"g4dn.12xlarge"|"g4dn.16xlarge"|"g4dn.metal"|"cg1.4xlarge"|"p2.xlarge"|"p2.8xlarge"|"p2.16xlarge"|"p3.2xlarge"|"p3.8xlarge"|"p3.16xlarge"|"p3dn.24xlarge"|"d2.xlarge"|"d2.2xlarge"|"d2.4xlarge"|"d2.8xlarge"|"f1.2xlarge"|"f1.4xlarge"|"f1.16xlarge"|"m5.large"|"m5.xlarge"|"m5.2xlarge"|"m5.4xlarge"|"m5.8xlarge"|"m5.12xlarge"|"m5.16xlarge"|"m5.24xlarge"|"m5.metal"|"m5a.large"|"m5a.xlarge"|"m5a.2xlarge"|"m5a.4xlarge"|"m5a.8xlarge"|"m5a.12xlarge"|"m5a.16xlarge"|"m5a.24xlarge"|"m5d.large"|"m5d.xlarge"|"m5d.2xlarge"|"m5d.4xlarge"|"m5d.8xlarge"|"m5d.12xlarge"|"m5d.16xlarge"|"m5d.24xlarge"|"m5d.metal"|"m5ad.large"|"m5ad.xlarge"|"m5ad.2xlarge"|"m5ad.4xlarge"|"m5ad.8xlarge"|"m5ad.12xlarge"|"m5ad.16xlarge"|"m5ad.24xlarge"|"h1.2xlarge"|"h1.4xlarge"|"h1.8xlarge"|"h1.16xlarge"|"z1d.large"|"z1d.xlarge"|"z1d.2xlarge"|"z1d.3xlarge"|"z1d.6xlarge"|"z1d.12xlarge"|"z1d.metal"|"u-6tb1.metal"|"u-9tb1.metal"|"u-12tb1.metal"|"u-18tb1.metal"|"u-24tb1.metal"|"a1.medium"|"a1.large"|"a1.xlarge"|"a1.2xlarge"|"a1.4xlarge"|"a1.metal"|"m5dn.large"|"m5dn.xlarge"|"m5dn.2xlarge"|"m5dn.4xlarge"|"m5dn.8xlarge"|"m5dn.12xlarge"|"m5dn.16xlarge"|"m5dn.24xlarge"|"m5n.large"|"m5n.xlarge"|"m5n.2xlarge"|"m5n.4xlarge"|"m5n.8xlarge"|"m5n.12xlarge"|"m5n.16xlarge"|"m5n.24xlarge"|"r5dn.large"|"r5dn.xlarge"|"r5dn.2xlarge"|"r5dn.4xlarge"|"r5dn.8xlarge"|"r5dn.12xlarge"|"r5dn.16xlarge"|"r5dn.24xlarge"|"r5n.large"|"r5n.xlarge"|"r5n.2xlarge"|"r5n.4xlarge"|"r5n.8xlarge"|"r5n.12xlarge"|"r5n.16xlarge"|"r5n.24xlarge"|"inf1.xlarge"|"inf1.2xlarge"|"inf1.6xlarge"|"inf1.24xlarge"|"m6g.metal"|"m6g.medium"|"m6g.large"|"m6g.xlarge"|"m6g.2xlarge"|"m6g.4xlarge"|"m6g.8xlarge"|"m6g.12xlarge"|"m6g.16xlarge",
  "KernelId": "string",
  "KeyName": "string",
  "Monitoring": {
    "Enabled": true|false
  },
  "NetworkInterfaces": [
    {
      "AssociatePublicIpAddress": true|false,
      "DeleteOnTermination": true|false,
      "Description": "string",
      "DeviceIndex": integer,
      "Groups": ["string", ...],
      "Ipv6AddressCount": integer,
      "Ipv6Addresses": [
        {
          "Ipv6Address": "string"
        }
        ...
      ],
      "NetworkInterfaceId": "string",
      "PrivateIpAddress": "string",
      "PrivateIpAddresses": [
        {
          "Primary": true|false,
          "PrivateIpAddress": "string"
        }
        ...
      ],
      "SecondaryPrivateIpAddressCount": integer,
      "SubnetId": "string",
      "InterfaceType": "string"
    }
    ...
  ],
  "Placement": {
    "AvailabilityZone": "string",
    "GroupName": "string",
    "Tenancy": "default"|"dedicated"|"host"
  },
  "RamdiskId": "string",
  "SubnetId": "string",
  "UserData": "string"
}

--spot-price (string)

The maximum price per hour that you are willing to pay for a Spot Instance. The default is the On-Demand price.

--type (string)

The Spot Instance request type.

Default: one-time

Possible values:

one-time

persistent

--valid-from (timestamp)

The start date of the request. If this is a one-time request, the request becomes active at this date and time and remains active until all instances launch, the request expires, or the request is canceled. If the request is persistent, the request becomes active at this date and time and remains active until it expires or is canceled.

The specified start date and time cannot be equal to the current date and time. You must specify a start date and time that occurs after the current date and time.

--valid-until (timestamp)

The end date of the request. If this is a one-time request, the request remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date is reached. The default end date is 7 days from the current date.

--tag-specifications (list)

The key-value pair for tagging the Spot Instance request on creation. The value for ResourceType must be spot-instances-request , otherwise the Spot Instance request fails. To tag the Spot Instance request after it has been created, see CreateTags .

(structure)

The tags to apply to a resource when the resource is being created.

ResourceType -> (string)

The type of resource to tag. Currently, the resource types that support tagging on creation are: capacity-reservation | client-vpn-endpoint | dedicated-host | dhcp-options | export-image-task | export-instance-task | fleet | fpga-image | host-reservation | import-image-task | import-snapshot-task | instance | internet-gateway | ipv4pool-ec2 | ipv6pool-ec2 | key-pair | launch-template | placement-group | prefix-list | natgateway | network-acl | security-group | spot-fleet-request | spot-instances-request | snapshot | subnet | traffic-mirror-filter | traffic-mirror-session | traffic-mirror-target | transit-gateway | transit-gateway-attachment | transit-gateway-route-table | volume |vpc | vpc-endpoint (for interface and gateway endpoints) | vpc-endpoint-service (for AWS PrivateLink) | vpc-flow-log .

To tag a resource after it has been created, see CreateTags .

Tags -> (list)

The tags to apply to the resource.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode characters.

Shorthand Syntax:

ResourceType=string,Tags=[{Key=string,Value=string},{Key=string,Value=string}] ...

JSON Syntax:

[
  {
    "ResourceType": "client-vpn-endpoint"|"customer-gateway"|"dedicated-host"|"dhcp-options"|"elastic-ip"|"elastic-gpu"|"export-image-task"|"export-instance-task"|"fleet"|"fpga-image"|"host-reservation"|"image"|"import-image-task"|"import-snapshot-task"|"instance"|"internet-gateway"|"key-pair"|"launch-template"|"local-gateway-route-table-vpc-association"|"natgateway"|"network-acl"|"network-interface"|"placement-group"|"reserved-instances"|"route-table"|"security-group"|"snapshot"|"spot-fleet-request"|"spot-instances-request"|"subnet"|"traffic-mirror-filter"|"traffic-mirror-session"|"traffic-mirror-target"|"transit-gateway"|"transit-gateway-attachment"|"transit-gateway-multicast-domain"|"transit-gateway-route-table"|"volume"|"vpc"|"vpc-peering-connection"|"vpn-connection"|"vpn-gateway"|"vpc-flow-log",
    "Tags": [
      {
        "Key": "string",
        "Value": "string"
      }
      ...
    ]
  }
  ...
]

--instance-interruption-behavior (string)

The behavior when a Spot Instance is interrupted. The default is terminate .

Possible values:

hibernate

stop

terminate

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

--cli-auto-prompt (boolean) Automatically prompt for CLI input parameters.

See ‘aws help’ for descriptions of global parameters.

Examples¶

To request Spot Instances

This example command creates a one-time Spot Instance request for five instances in the specified Availability Zone. If your account supports EC2-VPC only, Amazon EC2 launches the instances in the default subnet of the specified Availability Zone. If your account supports EC2-Classic, Amazon EC2 launches the instances in EC2-Classic in the specified Availability Zone.

Command:

aws ec2 request-spot-instances --spot-price "0.03" --instance-count 5 --type "one-time" --launch-specification file://specification.json

Specification.json:

{
  "ImageId": "ami-1a2b3c4d",
  "KeyName": "my-key-pair",
  "SecurityGroupIds": [ "sg-1a2b3c4d" ],
  "InstanceType": "m3.medium",
  "Placement": {
    "AvailabilityZone": "us-west-2a"
  },
  "IamInstanceProfile": {
      "Arn": "arn:aws:iam::123456789012:instance-profile/my-iam-role"
  }
}

Output:

{
  "SpotInstanceRequests": [
      {
          "Status": {
              "UpdateTime": "2014-03-25T20:54:21.000Z",
              "Code": "pending-evaluation",
              "Message": "Your Spot request has been submitted for review, and is pending evaluation."
          },
          "ProductDescription": "Linux/UNIX",
          "SpotInstanceRequestId": "sir-df6f405d",
          "State": "open",
          "LaunchSpecification": {
              "Placement": {
                  "AvailabilityZone": "us-west-2a"
              },
              "ImageId": "ami-1a2b3c4d",
              "KeyName": "my-key-pair",
              "SecurityGroups": [
                  {
                      "GroupName": "my-security-group",
                      "GroupId": "sg-1a2b3c4d"
                  }
              ],
              "Monitoring": {
                  "Enabled": false
              },
              "IamInstanceProfile": {
                  "Arn": "arn:aws:iam::123456789012:instance-profile/my-iam-role"
              },
              "InstanceType": "m3.medium"
          },
          "Type": "one-time",
          "CreateTime": "2014-03-25T20:54:20.000Z",
          "SpotPrice": "0.050000"
      },
      ...
  ]
}

This example command creates a one-time Spot Instance request for five instances in the specified subnet. Amazon EC2 launches the instances in the specified subnet. If the VPC is a nondefault VPC, the instances do not receive a public IP address by default.

Command:

aws ec2 request-spot-instances --spot-price "0.050" --instance-count 5 --type "one-time" --launch-specification file://specification.json

Specification.json:

{
  "ImageId": "ami-1a2b3c4d",
  "SecurityGroupIds": [ "sg-1a2b3c4d" ],
  "InstanceType": "m3.medium",
  "SubnetId": "subnet-1a2b3c4d",
  "IamInstanceProfile": {
      "Arn": "arn:aws:iam::123456789012:instance-profile/my-iam-role"
  }
}

Output:

{
  "SpotInstanceRequests": [
      {
          "Status": {
             "UpdateTime": "2014-03-25T22:21:58.000Z",
             "Code": "pending-evaluation",
             "Message": "Your Spot request has been submitted for review, and is pending evaluation."
          },
          "ProductDescription": "Linux/UNIX",
          "SpotInstanceRequestId": "sir-df6f405d",
          "State": "open",
          "LaunchSpecification": {
             "Placement": {
                 "AvailabilityZone": "us-west-2a"
             }
             "ImageId": "ami-1a2b3c4d"
             "SecurityGroups": [
                 {
                     "GroupName": "my-security-group",
                     "GroupID": "sg-1a2b3c4d"
                 }
             ]
             "SubnetId": "subnet-1a2b3c4d",
             "Monitoring": {
                 "Enabled": false
             },
             "IamInstanceProfile": {
                 "Arn": "arn:aws:iam::123456789012:instance-profile/my-iam-role"
             },
             "InstanceType": "m3.medium",
         },
         "Type": "one-time",
         "CreateTime": "2014-03-25T22:21:58.000Z",
         "SpotPrice": "0.050000"
      },
      ...
  ]
}

This example assigns a public IP address to the Spot Instances that you launch in a nondefault VPC. Note that when you specify a network interface, you must include the subnet ID and security group ID using the network interface.

Command:

aws ec2 request-spot-instances --spot-price "0.050" --instance-count 1 --type "one-time" --launch-specification file://specification.json

Specification.json:

{
  "ImageId": "ami-1a2b3c4d",
  "KeyName": "my-key-pair",
  "InstanceType": "m3.medium",
  "NetworkInterfaces": [
    {
      "DeviceIndex": 0,
      "SubnetId": "subnet-1a2b3c4d",
      "Groups": [ "sg-1a2b3c4d" ],
      "AssociatePublicIpAddress": true
    }
  ],
  "IamInstanceProfile": {
      "Arn": "arn:aws:iam::123456789012:instance-profile/my-iam-role"
  }
}

Output¶

SpotInstanceRequests -> (list)

One or more Spot Instance requests.

(structure)

Describes a Spot Instance request.

ActualBlockHourlyPrice -> (string)

If you specified a duration and your Spot Instance request was fulfilled, this is the fixed hourly price in effect for the Spot Instance while it runs.

AvailabilityZoneGroup -> (string)

The Availability Zone group. If you specify the same Availability Zone group for all Spot Instance requests, all Spot Instances are launched in the same Availability Zone.

BlockDurationMinutes -> (integer)

The duration for the Spot Instance, in minutes.

CreateTime -> (timestamp)

The date and time when the Spot Instance request was created, in UTC format (for example, YYYY -MM -DD T*HH* :MM :SS Z).

Fault -> (structure)

The fault codes for the Spot Instance request, if any.

Code -> (string)

The reason code for the Spot Instance state change.

Message -> (string)

The message for the Spot Instance state change.

InstanceId -> (string)

The instance ID, if an instance has been launched to fulfill the Spot Instance request.

LaunchGroup -> (string)

The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

LaunchSpecification -> (structure)

Additional information for launching instances.

UserData -> (string)

The Base64-encoded user data for the instance.

SecurityGroups -> (list)

One or more security groups. When requesting instances in a VPC, you must specify the IDs of the security groups. When requesting instances in EC2-Classic, you can specify the names or the IDs of the security groups.

(structure)

Describes a security group.

GroupName -> (string)

The name of the security group.

GroupId -> (string)

The ID of the security group.

AddressingType -> (string)

Deprecated.

BlockDeviceMappings -> (list)

One or more block device mapping entries.

(structure)

Describes a block device mapping.

DeviceName -> (string)

The device name (for example, /dev/sdh or xvdh ).

VirtualName -> (string)

The virtual device name (ephemeral N). Instance store volumes are numbered starting from 0. An instance type with 2 available instance store volumes can specify mappings for ephemeral0 and ephemeral1 . The number of available instance store volumes depends on the instance type. After you connect to the instance, you must mount the volume.

NVMe instance store volumes are automatically enumerated and assigned a device name. Including them in your block device mapping has no effect.

Constraints: For M3 instances, you must specify instance store volumes in the block device mapping for the instance. When you launch an M3 instance, we ignore any instance store volumes specified in the block device mapping for the AMI.

Ebs -> (structure)

Parameters used to automatically set up EBS volumes when the instance is launched.

DeleteOnTermination -> (boolean)

Indicates whether the EBS volume is deleted on instance termination. For more information, see Preserving Amazon EBS volumes on instance termination in the Amazon Elastic Compute Cloud User Guide.

Iops -> (integer)

The number of I/O operations per second (IOPS) that the volume supports. For io1 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide .

Constraints: Range is 100-16,000 IOPS for gp2 volumes and 100 to 64,000IOPS for io1 volumes in most Regions. Maximum io1 IOPS of 64,000 is guaranteed only on Nitro-based instances . Other instance families guarantee performance up to 32,000 IOPS. For more information, see Amazon EBS Volume Types in the Amazon Elastic Compute Cloud User Guide .

Condition: This parameter is required for requests to create io1 volumes; it is not used in requests to create gp2 , st1 , sc1 , or standard volumes.

SnapshotId -> (string)

The ID of the snapshot.

VolumeSize -> (integer)

The size of the volume, in GiB.

Default: If you’re creating the volume from a snapshot and don’t specify a volume size, the default is the snapshot size.

Constraints: 1-16384 for General Purpose SSD (gp2 ), 4-16384 for Provisioned IOPS SSD (io1 ), 500-16384 for Throughput Optimized HDD (st1 ), 500-16384 for Cold HDD (sc1 ), and 1-1024 for Magnetic (standard ) volumes. If you specify a snapshot, the volume size must be equal to or larger than the snapshot size.

VolumeType -> (string)

The volume type. If you set the type to io1 , you must also specify the Iops parameter. If you set the type to gp2 , st1 , sc1 , or standard , you must omit the Iops parameter.

Default: gp2

KmsKeyId -> (string)

Identifier (key ID, key alias, ID ARN, or alias ARN) for a customer managed CMK under which the EBS volume is encrypted.

This parameter is only supported on BlockDeviceMapping objects called by RunInstances , RequestSpotFleet , and RequestSpotInstances .

Encrypted -> (boolean)

Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Amazon EBS Encryption in the Amazon Elastic Compute Cloud User Guide .

In no case can you remove encryption from an encrypted volume.

Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types .

This parameter is not returned by .

NoDevice -> (string)

Suppresses the specified device included in the block device mapping of the AMI.

EbsOptimized -> (boolean)

Indicates whether the instance is optimized for EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal EBS I/O performance. This optimization isn’t available with all instance types. Additional usage charges apply when using an EBS Optimized instance.

Default: false

IamInstanceProfile -> (structure)

The IAM instance profile.

Arn -> (string)

The Amazon Resource Name (ARN) of the instance profile.

Name -> (string)

The name of the instance profile.

ImageId -> (string)

The ID of the AMI.

InstanceType -> (string)

The instance type.

KernelId -> (string)

The ID of the kernel.

KeyName -> (string)

The name of the key pair.

NetworkInterfaces -> (list)

One or more network interfaces. If you specify a network interface, you must specify subnet IDs and security group IDs using the network interface.

(structure)

Describes a network interface.

AssociatePublicIpAddress -> (boolean)

Indicates whether to assign a public IPv4 address to an instance you launch in a VPC. The public IP address can only be assigned to a network interface for eth0, and can only be assigned to a new network interface, not an existing one. You cannot specify more than one network interface in the request. If launching into a default subnet, the default value is true .

DeleteOnTermination -> (boolean)

If set to true , the interface is deleted when the instance is terminated. You can specify true only if creating a new network interface when launching an instance.

Description -> (string)

The description of the network interface. Applies only if creating a network interface when launching an instance.

DeviceIndex -> (integer)

The position of the network interface in the attachment order. A primary network interface has a device index of 0.

If you specify a network interface when launching an instance, you must specify the device index.

Groups -> (list)

The IDs of the security groups for the network interface. Applies only if creating a network interface when launching an instance.

(string)

Ipv6AddressCount -> (integer)

A number of IPv6 addresses to assign to the network interface. Amazon EC2 chooses the IPv6 addresses from the range of the subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you’ve specified a minimum number of instances to launch.

Ipv6Addresses -> (list)

One or more IPv6 addresses to assign to the network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you’ve specified a minimum number of instances to launch.

(structure)

Describes an IPv6 address.

Ipv6Address -> (string)

The IPv6 address.

NetworkInterfaceId -> (string)

The ID of the network interface.

If you are creating a Spot Fleet, omit this parameter because you can’t specify a network interface ID in a launch specification.

PrivateIpAddress -> (string)

The private IPv4 address of the network interface. Applies only if creating a network interface when launching an instance. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

PrivateIpAddresses -> (list)

One or more private IPv4 addresses to assign to the network interface. Only one private IPv4 address can be designated as primary. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

(structure)

Describes a secondary private IPv4 address for a network interface.

Primary -> (boolean)

Indicates whether the private IPv4 address is the primary private IPv4 address. Only one IPv4 address can be designated as primary.

PrivateIpAddress -> (string)

The private IPv4 addresses.

SecondaryPrivateIpAddressCount -> (integer)

The number of secondary private IPv4 addresses. You can’t specify this option and specify more than one private IP address using the private IP addresses option. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

SubnetId -> (string)

The ID of the subnet associated with the network interface. Applies only if creating a network interface when launching an instance.

InterfaceType -> (string)

The type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa . For more information, see Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide .

If you are not creating an EFA, specify interface or omit this parameter.

Valid values: interface | efa

Placement -> (structure)

The placement information for the instance.

AvailabilityZone -> (string)

The Availability Zone.

[Spot Fleet only] To specify multiple Availability Zones, separate them using commas; for example, “us-west-2a, us-west-2b”.

GroupName -> (string)

The name of the placement group.

Tenancy -> (string)

The tenancy of the instance (if the instance is running in a VPC). An instance with a tenancy of dedicated runs on single-tenant hardware. The host tenancy is not supported for Spot Instances.

RamdiskId -> (string)

The ID of the RAM disk.

SubnetId -> (string)

The ID of the subnet in which to launch the instance.

Monitoring -> (structure)

Describes the monitoring of an instance.

Enabled -> (boolean)

Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.

LaunchedAvailabilityZone -> (string)

The Availability Zone in which the request is launched.

ProductDescription -> (string)

The product description associated with the Spot Instance.

SpotInstanceRequestId -> (string)

The ID of the Spot Instance request.

SpotPrice -> (string)

The maximum price per hour that you are willing to pay for a Spot Instance.

State -> (string)

The state of the Spot Instance request. Spot status information helps track your Spot Instance requests. For more information, see Spot status in the Amazon EC2 User Guide for Linux Instances .

Status -> (structure)

The status code and status message describing the Spot Instance request.

Code -> (string)

The status code. For a list of status codes, see Spot status codes in the Amazon EC2 User Guide for Linux Instances .

Message -> (string)

The description for the status code.

UpdateTime -> (timestamp)

The date and time of the most recent status update, in UTC format (for example, YYYY -MM -DD T*HH* :MM :SS Z).

Tags -> (list)

Any tags assigned to the resource.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode characters.

Type -> (string)

The Spot Instance request type.

ValidFrom -> (timestamp)

The start date of the request, in UTC format (for example, YYYY -MM -DD T*HH* :MM :SS Z). The request becomes active at this date and time.

ValidUntil -> (timestamp)

The end date of the request, in UTC format (for example, YYYY -MM -DD T*HH* :MM :SS Z). If this is a one-time request, it remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date is reached. The default end date is 7 days from the current date.

InstanceInterruptionBehavior -> (string)

The behavior when a Spot Instance is interrupted.

Table of Contents

Feedback

User Guide

request-spot-instances¶

Description¶

Synopsis¶

Options¶

Examples¶

Output¶