AWS CLI Command Reference

[ aws . fsx ]

create-file-system

Description

Creates a new, empty Amazon FSx file system.

If a file system with the specified client request token exists and the parameters match, CreateFileSystem returns the description of the existing file system. If a file system specified client request token exists and the parameters don’t match, this call returns IncompatibleParameterError . If a file system with the specified client request token doesn’t exist, CreateFileSystem does the following:

  • Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of CREATING .

  • Returns the description of the file system.

This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation. This means that calling the operation multiple times with the same client request token has no effect. By using the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

Note

The CreateFileSystem call returns while the file system’s lifecycle state is still CREATING . You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  create-file-system
[--client-request-token <value>]
--file-system-type <value>
--storage-capacity <value>
[--storage-type <value>]
--subnet-ids <value>
[--security-group-ids <value>]
[--tags <value>]
[--kms-key-id <value>]
[--windows-configuration <value>]
[--lustre-configuration <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--cli-auto-prompt <value>]

Options

--client-request-token (string)

A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

--file-system-type (string)

The type of Amazon FSx file system to create, either WINDOWS or LUSTRE .

Possible values:

  • WINDOWS

  • LUSTRE

--storage-capacity (integer)

Sets the storage capacity of the file system that you’re creating.

For Lustre file systems:

  • For SCRATCH_2 and PERSISTENT_1 deployment types, valid values are 1.2, 2.4, and increments of 2.4 TiB.

  • For SCRATCH_1 deployment type, valid values are 1.2, 2.4, and increments of 3.6 TiB.

For Windows file systems:

  • If StorageType=SSD , valid values are 32 GiB - 65,536 GiB (64 TiB).

  • If StorageType=HDD , valid values are 2000 GiB - 65,536 GiB (64 TiB).

--storage-type (string)

Sets the storage type for the Amazon FSx for Windows file system you’re creating. Valid values are SSD and HDD .

  • Set to SSD to use solid state drive storage. SSD is supported on all Windows deployment types.

  • Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types.

Default value is SSD . For more information, see Storage Type Options in the Amazon FSx for Windows User Guide .

Possible values:

  • SSD

  • HDD

--subnet-ids (list)

Specifies the IDs of the subnets that the file system will be accessible from. For Windows MULTI_AZ_1 file system deployment types, provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID property.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 file system deployment types and Lustre file systems, provide exactly one subnet ID. The file server is launched in that subnet’s Availability Zone.

(string)

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

Syntax:

"string" "string" ...

--security-group-ids (list)

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn’t returned in later requests to describe the file system.

(string)

The ID of your Amazon EC2 security group. This ID is used to control network access to the endpoint that Amazon FSx creates on your behalf in each subnet. For more information, see Amazon EC2 Security Groups for Linux Instances in the Amazon EC2 User Guide .

Syntax:

"string" "string" ...

--tags (list)

The tags to apply to the file system being created. The key value of the Name tag appears in the console as the file system name.

(structure)

Specifies a key-value pair for a resource tag.

Key -> (string)

A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

Value -> (string)

A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don’t have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

Shorthand Syntax:

Key=string,Value=string ...

JSON Syntax:

[
  {
    "Key": "string",
    "Value": "string"
  }
  ...
]

--kms-key-id (string)

The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system’s data for Amazon FSx for Windows File Server file systems and Amazon FSx for Lustre PERSISTENT_1 file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The Amazon FSx for Lustre SCRATCH_1 and SCRATCH_2 file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .

--windows-configuration (structure)

The Microsoft Windows configuration for the file system being created.

ActiveDirectoryId -> (string)

The ID for an existing AWS Managed Microsoft Active Directory (AD) instance that the file system should join when it’s created.

SelfManagedActiveDirectoryConfiguration -> (structure)

The configuration that Amazon FSx uses to join the Windows File Server instance to your self-managed (including on-premises) Microsoft Active Directory (AD) directory.

DomainName -> (string)

The fully qualified domain name of the self-managed AD directory, such as corp.example.com .

OrganizationalUnitDistinguishedName -> (string)

(Optional) The fully qualified distinguished name of the organizational unit within your self-managed AD directory that the Windows File Server instance will join. Amazon FSx only accepts OU as the direct parent of the file system. An example is OU=FSx,DC=yourdomain,DC=corp,DC=com . To learn more, see RFC 2253 . If none is provided, the FSx file system is created in the default location of your self-managed AD directory.

Warning

Only Organizational Unit (OU) objects can be the direct parent of the file system that you’re creating.

FileSystemAdministratorsGroup -> (string)

(Optional) The name of the domain group whose members are granted administrative privileges for the file system. Administrative privileges include taking ownership of files and folders, setting audit controls (audit ACLs) on files and folders, and administering the file system remotely by using the FSx Remote PowerShell. The group that you specify must already exist in your domain. If you don’t provide one, your AD domain’s Domain Admins group is used.

UserName -> (string)

The user name for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain. This account must have the permission to join computers to the domain in the organizational unit provided in OrganizationalUnitDistinguishedName , or in the default location of your AD domain.

Password -> (string)

The password for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain.

DnsIps -> (list)

A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory. The IP addresses need to be either in the same VPC CIDR range as the one in which your Amazon FSx file system is being created, or in the private IP version 4 (IPv4) address ranges, as specified in RFC 1918 :

  • 10.0.0.0 - 10.255.255.255 (10/8 prefix)

  • 172.16.0.0 - 172.31.255.255 (172.16/12 prefix)

  • 192.168.0.0 - 192.168.255.255 (192.168/16 prefix)

(string)

DeploymentType -> (string)

Specifies the file system deployment type, valid values are the following:

  • MULTI_AZ_1 - Deploys a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. You can only deploy a Multi-AZ file system in AWS Regions that have a minimum of three Availability Zones. Also supports HDD storage type

  • SINGLE_AZ_1 - (Default) Choose to deploy a file system that is configured for single AZ redundancy.

  • SINGLE_AZ_2 - The latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports HDD storage type.

For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems .

PreferredSubnetId -> (string)

Required when DeploymentType is set to MULTI_AZ_1 . This specifies the subnet in which you want the preferred file server to be located. For in-AWS applications, we recommend that you launch your clients in the same Availability Zone (AZ) as your preferred file server to reduce cross-AZ data transfer costs and minimize latency.

ThroughputCapacity -> (integer)

The throughput of an Amazon FSx file system, measured in megabytes per second, in 2 to the n th increments, between 2^3 (8) and 2^11 (2048).

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

DailyAutomaticBackupStartTime -> (string)

The preferred time to take daily automatic backups, formatted HH:MM in the UTC time zone.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. The default is to retain backups for 7 days. Setting this value to 0 disables the creation of automatic backups. The maximum retention period for backups is 35 days.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags for the file system should be copied to backups. This value defaults to false. If it’s set to true, all tags for the file system are copied to all automatic and user-initiated backups where the user doesn’t specify tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

Shorthand Syntax:

ActiveDirectoryId=string,SelfManagedActiveDirectoryConfiguration={DomainName=string,OrganizationalUnitDistinguishedName=string,FileSystemAdministratorsGroup=string,UserName=string,Password=string,DnsIps=[string,string]},DeploymentType=string,PreferredSubnetId=string,ThroughputCapacity=integer,WeeklyMaintenanceStartTime=string,DailyAutomaticBackupStartTime=string,AutomaticBackupRetentionDays=integer,CopyTagsToBackups=boolean

JSON Syntax:

{
  "ActiveDirectoryId": "string",
  "SelfManagedActiveDirectoryConfiguration": {
    "DomainName": "string",
    "OrganizationalUnitDistinguishedName": "string",
    "FileSystemAdministratorsGroup": "string",
    "UserName": "string",
    "Password": "string",
    "DnsIps": ["string", ...]
  },
  "DeploymentType": "MULTI_AZ_1"|"SINGLE_AZ_1"|"SINGLE_AZ_2",
  "PreferredSubnetId": "string",
  "ThroughputCapacity": integer,
  "WeeklyMaintenanceStartTime": "string",
  "DailyAutomaticBackupStartTime": "string",
  "AutomaticBackupRetentionDays": integer,
  "CopyTagsToBackups": true|false
}

--lustre-configuration (structure)

The Lustre configuration for the file system being created.

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

ImportPath -> (string)

(Optional) The path to the Amazon S3 bucket (including the optional prefix) that you’re using as the data repository for your Amazon FSx for Lustre file system. The root of your FSx for Lustre file system will be mapped to the root of the Amazon S3 bucket you select. An example is s3://import-bucket/optional-prefix . If you specify a prefix after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

ExportPath -> (string)

(Optional) The path in Amazon S3 where the root of your Amazon FSx file system is exported. The path must use the same Amazon S3 bucket as specified in ImportPath. You can provide an optional prefix to which new and changed data is to be exported from your Amazon FSx for Lustre file system. If an ExportPath value is not provided, Amazon FSx sets a default export path, s3://import-bucket/FSxLustre[creation-timestamp] . The timestamp is in UTC format, for example s3://import-bucket/FSxLustre20181105T222312Z .

The Amazon S3 export bucket must be the same as the import bucket specified by ImportPath . If you only specify a bucket name, such as s3://import-bucket , you get a 1:1 mapping of file system objects to S3 bucket objects. This mapping means that the input data in S3 is overwritten on export. If you provide a custom prefix in the export path, such as s3://import-bucket/[custom-optional-prefix] , Amazon FSx exports the contents of your file system to that export prefix in the Amazon S3 bucket.

ImportedFileChunkSize -> (integer)

(Optional) For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

DeploymentType -> (string)

Choose SCRATCH_1 and SCRATCH_2 deployment types when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .

Note

This option can only be set for for PERSISTENT_1 deployments types.

Choose PERSISTENT_1 deployment type for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options .

Encryption of data in-transit is automatically enabled when you access a SCRATCH_2 or PERSISTENT_1 file system from Amazon EC2 instances that support this feature . (Default = SCRATCH_1 )

Encryption of data in-transit for SCRATCH_2 and PERSISTENT_1 deployment types is supported when accessed from supported instance types in supported AWS Regions. To learn more, Encrypting Data in Transit .

PerUnitStorageThroughput -> (integer)

Required for the PERSISTENT_1 deployment type, describes the amount of read and write throughput for each 1 tebibyte of storage, in MB/s/TiB. File system throughput capacity is calculated by multiplying file system storage capacity (TiB) by the PerUnitStorageThroughput (MB/s/TiB). For a 2.4 TiB file system, provisioning 50 MB/s/TiB of PerUnitStorageThroughput yields 117 MB/s of file system throughput. You pay for the amount of throughput that you provision.

Valid values are 50, 100, 200.

DailyAutomaticBackupStartTime -> (string)

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days. The default is 0.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags for the file system should be copied to backups. This value defaults to false. If it’s set to true, all tags for the file system are copied to all automatic and user-initiated backups where the user doesn’t specify tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

Shorthand Syntax:

WeeklyMaintenanceStartTime=string,ImportPath=string,ExportPath=string,ImportedFileChunkSize=integer,DeploymentType=string,PerUnitStorageThroughput=integer,DailyAutomaticBackupStartTime=string,AutomaticBackupRetentionDays=integer,CopyTagsToBackups=boolean

JSON Syntax:

{
  "WeeklyMaintenanceStartTime": "string",
  "ImportPath": "string",
  "ExportPath": "string",
  "ImportedFileChunkSize": integer,
  "DeploymentType": "SCRATCH_1"|"SCRATCH_2"|"PERSISTENT_1",
  "PerUnitStorageThroughput": integer,
  "DailyAutomaticBackupStartTime": "string",
  "AutomaticBackupRetentionDays": integer,
  "CopyTagsToBackups": true|false
}

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

--cli-auto-prompt (boolean) Automatically prompt for CLI input parameters.

See ‘aws help’ for descriptions of global parameters.

Output

FileSystem -> (structure)

The configuration of the file system that was created.

OwnerId -> (string)

The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.

CreationTime -> (timestamp)

The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

FileSystemId -> (string)

The system-generated, unique 17-digit ID of the file system.

FileSystemType -> (string)

The type of Amazon FSx file system, either LUSTRE or WINDOWS .

Lifecycle -> (string)

The lifecycle status of the file system, following are the possible values and what they mean:

  • AVAILABLE - The file system is in a healthy state, and is reachable and available for use.

  • CREATING - Amazon FSx is creating the new file system.

  • DELETING - Amazon FSx is deleting an existing file system.

  • FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.

  • MISCONFIGURED indicates that the file system is in a failed but recoverable state.

  • UPDATING indicates that the file system is undergoing a customer initiated update.

FailureDetails -> (structure)

A structure providing details of any failures that occur when creating the file system has failed.

Message -> (string)

A message describing any failures that occurred during file system creation.

StorageCapacity -> (integer)

The storage capacity of the file system in gigabytes (GB).

StorageType -> (string)

The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.

VpcId -> (string)

The ID of the primary VPC for the file system.

SubnetIds -> (list)

Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.

For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .

(string)

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

NetworkInterfaceIds -> (list)

The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.

(string)

An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

DNSName -> (string)

The DNS name for the file system.

KmsKeyId -> (string)

The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system’s data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .

ResourceARN -> (string)

The Amazon Resource Name (ARN) for the file system resource.

Tags -> (list)

The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

(structure)

Specifies a key-value pair for a resource tag.

Key -> (string)

A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

Value -> (string)

A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don’t have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

WindowsConfiguration -> (structure)

The configuration for this Microsoft Windows file system.

ActiveDirectoryId -> (string)

The ID for an existing Microsoft Active Directory instance that the file system should join when it’s created.

SelfManagedActiveDirectoryConfiguration -> (structure)

The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.

DomainName -> (string)

The fully qualified domain name of the self-managed AD directory.

OrganizationalUnitDistinguishedName -> (string)

The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.

FileSystemAdministratorsGroup -> (string)

The name of the domain group whose members have administrative privileges for the FSx file system.

UserName -> (string)

The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.

DnsIps -> (list)

A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.

(string)

DeploymentType -> (string)

Specifies the file system deployment type, valid values are the following:

  • MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.

  • SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.

  • SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.

For more information, see Single-AZ and Multi-AZ File Systems .

RemoteAdministrationEndpoint -> (string)

For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.

For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.

This endpoint is temporarily unavailable when the file system is undergoing maintenance.

PreferredSubnetId -> (string)

For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.

For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems

PreferredFileServerIp -> (string)

For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.

Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system’s DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .

ThroughputCapacity -> (integer)

The throughput of an Amazon FSx file system, measured in megabytes per second.

MaintenanceOperationsInProgress -> (list)

The list of maintenance operations in progress for this file system.

(string)

An enumeration specifying the currently ongoing maintenance operation.

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

DailyAutomaticBackupStartTime -> (string)

The preferred time to take daily automatic backups, in the UTC time zone.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it’s set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn’t specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

LustreConfiguration -> (structure)

The configuration for the Amazon FSx for Lustre file system.

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

DataRepositoryConfiguration -> (structure)

The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

ImportPath -> (string)

The import path to the Amazon S3 bucket (and optional prefix) that you’re using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

ExportPath -> (string)

The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

ImportedFileChunkSize -> (integer)

For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

DeploymentType -> (string)

The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.

SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .

The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )

PerUnitStorageThroughput -> (integer)

Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types. Valid values are 50, 100, 200.

MountName -> (string)

You use the MountName value when mounting the file system.

For the SCRATCH_1 deployment type, this value is always “fsx “. For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.

DailyAutomaticBackupStartTime -> (string)

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days. The default is 0.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags on the file system should be copied to backups. If it’s set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn’t specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)

AdministrativeActions -> (list)

A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.

(structure)

Describes a specific Amazon FSx Administrative Action for the current Windows file system.

AdministrativeActionType -> (string)

Describes the type of administrative action, as follows:

  • FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system). A

  • STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system’s storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .

ProgressPercent -> (integer)

Provides the percent complete of a STORAGE_OPTIMIZATION administrative action.

RequestTime -> (timestamp)

Time that the administrative action request was received.

Status -> (string)

Describes the status of the administrative action, as follows:

  • FAILED - Amazon FSx failed to process the administrative action successfully.

  • IN_PROGRESS - Amazon FSx is processing the administrative action.

  • PENDING - Amazon FSx is waiting to process the administrative action.

  • COMPLETED - Amazon FSx has finished processing the administrative task.

  • UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .

TargetFileSystemValues -> (structure)

Describes the target StorageCapacity or ThroughputCapacity value provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.

OwnerId -> (string)

The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.

CreationTime -> (timestamp)

The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

FileSystemId -> (string)

The system-generated, unique 17-digit ID of the file system.

FileSystemType -> (string)

The type of Amazon FSx file system, either LUSTRE or WINDOWS .

Lifecycle -> (string)

The lifecycle status of the file system, following are the possible values and what they mean:

  • AVAILABLE - The file system is in a healthy state, and is reachable and available for use.

  • CREATING - Amazon FSx is creating the new file system.

  • DELETING - Amazon FSx is deleting an existing file system.

  • FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.

  • MISCONFIGURED indicates that the file system is in a failed but recoverable state.

  • UPDATING indicates that the file system is undergoing a customer initiated update.

FailureDetails -> (structure)

A structure providing details of any failures that occur when creating the file system has failed.

Message -> (string)

A message describing any failures that occurred during file system creation.

StorageCapacity -> (integer)

The storage capacity of the file system in gigabytes (GB).

StorageType -> (string)

The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.

VpcId -> (string)

The ID of the primary VPC for the file system.

SubnetIds -> (list)

Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.

For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .

(string)

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

NetworkInterfaceIds -> (list)

The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.

(string)

An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

DNSName -> (string)

The DNS name for the file system.

KmsKeyId -> (string)

The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system’s data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .

ResourceARN -> (string)

The Amazon Resource Name (ARN) for the file system resource.

Tags -> (list)

The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

(structure)

Specifies a key-value pair for a resource tag.

Key -> (string)

A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

Value -> (string)

A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don’t have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

WindowsConfiguration -> (structure)

The configuration for this Microsoft Windows file system.

ActiveDirectoryId -> (string)

The ID for an existing Microsoft Active Directory instance that the file system should join when it’s created.

SelfManagedActiveDirectoryConfiguration -> (structure)

The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.

DomainName -> (string)

The fully qualified domain name of the self-managed AD directory.

OrganizationalUnitDistinguishedName -> (string)

The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.

FileSystemAdministratorsGroup -> (string)

The name of the domain group whose members have administrative privileges for the FSx file system.

UserName -> (string)

The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.

DnsIps -> (list)

A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.

(string)

DeploymentType -> (string)

Specifies the file system deployment type, valid values are the following:

  • MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.

  • SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.

  • SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.

For more information, see Single-AZ and Multi-AZ File Systems .

RemoteAdministrationEndpoint -> (string)

For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.

For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.

This endpoint is temporarily unavailable when the file system is undergoing maintenance.

PreferredSubnetId -> (string)

For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.

For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems

PreferredFileServerIp -> (string)

For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.

Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system’s DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .

ThroughputCapacity -> (integer)

The throughput of an Amazon FSx file system, measured in megabytes per second.

MaintenanceOperationsInProgress -> (list)

The list of maintenance operations in progress for this file system.

(string)

An enumeration specifying the currently ongoing maintenance operation.

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

DailyAutomaticBackupStartTime -> (string)

The preferred time to take daily automatic backups, in the UTC time zone.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it’s set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn’t specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

LustreConfiguration -> (structure)

The configuration for the Amazon FSx for Lustre file system.

WeeklyMaintenanceStartTime -> (string)

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

DataRepositoryConfiguration -> (structure)

The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

ImportPath -> (string)

The import path to the Amazon S3 bucket (and optional prefix) that you’re using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

ExportPath -> (string)

The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

ImportedFileChunkSize -> (integer)

For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

DeploymentType -> (string)

The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.

SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .

The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )

PerUnitStorageThroughput -> (integer)

Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types. Valid values are 50, 100, 200.

MountName -> (string)

You use the MountName value when mounting the file system.

For the SCRATCH_1 deployment type, this value is always “fsx “. For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.

DailyAutomaticBackupStartTime -> (string)

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

AutomaticBackupRetentionDays -> (integer)

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days. The default is 0.

CopyTagsToBackups -> (boolean)

A boolean flag indicating whether tags on the file system should be copied to backups. If it’s set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn’t specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)

AdministrativeActions -> (list)

A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.

(structure)

Describes a specific Amazon FSx Administrative Action for the current Windows file system.

AdministrativeActionType -> (string)

Describes the type of administrative action, as follows:

  • FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system). A

  • STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system’s storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .

ProgressPercent -> (integer)

Provides the percent complete of a STORAGE_OPTIMIZATION administrative action.

RequestTime -> (timestamp)

Time that the administrative action request was received.

Status -> (string)

Describes the status of the administrative action, as follows:

  • FAILED - Amazon FSx failed to process the administrative action successfully.

  • IN_PROGRESS - Amazon FSx is processing the administrative action.

  • PENDING - Amazon FSx is waiting to process the administrative action.

  • COMPLETED - Amazon FSx has finished processing the administrative task.

  • UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .

( … recursive … )FailureDetails -> (structure)

Provides information about a failed administrative action.

Message -> (string)

Error message providing details about the failure.

FailureDetails -> (structure)

Provides information about a failed administrative action.

Message -> (string)

Error message providing details about the failure.

© Copyright 2018, Amazon Web Services. Created using Sphinx.