put-config-rule¶

Description¶

Adds or updates an AWS Config rule for evaluating whether your AWS resources comply with your desired configurations.

You can use this action for custom AWS Config rules and AWS managed Config rules. A custom AWS Config rule is a rule that you develop and maintain. An AWS managed Config rule is a customizable, predefined rule that AWS Config provides.

If you are adding a new custom AWS Config rule, you must first create the AWS Lambda function that the rule invokes to evaluate your resources. When you use the PutConfigRule action to add the rule to AWS Config, you must specify the Amazon Resource Name (ARN) that AWS Lambda assigns to the function. Specify the ARN for the SourceIdentifier key. This key is part of the Source object, which is part of the ConfigRule object.

If you are adding an AWS managed Config rule, specify the rule’s identifier for the SourceIdentifier key. To reference AWS managed Config rule identifiers, see About AWS Managed Config Rules .

For any new rule that you add, specify the ConfigRuleName in the ConfigRule object. Do not specify the ConfigRuleArn or the ConfigRuleId . These values are generated by AWS Config for new rules.

If you are updating a rule that you added previously, you can specify the rule by ConfigRuleName , ConfigRuleId , or ConfigRuleArn in the ConfigRule data type that you use in this request.

The maximum number of rules that AWS Config supports is 150.

For information about requesting a rule limit increase, see AWS Config Limits in the AWS General Reference Guide .

For more information about developing and using AWS Config rules, see Evaluating AWS Resource Configurations with AWS Config in the AWS Config Developer Guide .

Synopsis¶

  put-config-rule
--config-rule <value>
[--tags <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--cli-auto-prompt <value>]

Options¶

--config-rule (structure)

The rule that you want to add to your account.

ConfigRuleName -> (string)

The name that you assign to the AWS Config rule. The name is required if you are adding a new rule.

ConfigRuleArn -> (string)

The Amazon Resource Name (ARN) of the AWS Config rule.

ConfigRuleId -> (string)

The ID of the AWS Config rule.

Description -> (string)

The description that you provide for the AWS Config rule.

Scope -> (structure)

Defines which resources can trigger an evaluation for the rule. The scope can include one or more resource types, a combination of one resource type and one resource ID, or a combination of a tag key and value. Specify a scope to constrain the resources that can trigger an evaluation for the rule. If you do not specify a scope, evaluations are triggered when any resource in the recording group changes.

Note

The scope can be empty.

ComplianceResourceTypes -> (list)

The resource types of only those AWS resources that you want to trigger an evaluation for the rule. You can only specify one type if you also specify a resource ID for ComplianceResourceId .

(string)

TagKey -> (string)

The tag key that is applied to only those AWS resources that you want to trigger an evaluation for the rule.

TagValue -> (string)

The tag value applied to only those AWS resources that you want to trigger an evaluation for the rule. If you specify a value for TagValue , you must also specify a value for TagKey .

ComplianceResourceId -> (string)

The ID of the only AWS resource that you want to trigger an evaluation for the rule. If you specify a resource ID, you must specify one resource type for ComplianceResourceTypes .

Source -> (structure)

Provides the rule owner (AWS or customer), the rule identifier, and the notifications that cause the function to evaluate your AWS resources.

Owner -> (string)

Indicates whether AWS or the customer owns and manages the AWS Config rule.

SourceIdentifier -> (string)

For AWS Config managed rules, a predefined identifier from a list. For example, IAM_PASSWORD_POLICY is a managed rule. To reference a managed rule, see Using AWS Managed Config Rules .

For custom rules, the identifier is the Amazon Resource Name (ARN) of the rule’s AWS Lambda function, such as arn:aws:lambda:us-east-2:123456789012:function:custom_rule_name .

SourceDetails -> (list)

Provides the source and type of the event that causes AWS Config to evaluate your AWS resources.

(structure)

Provides the source and the message types that trigger AWS Config to evaluate your AWS resources against a rule. It also provides the frequency with which you want AWS Config to run evaluations for the rule if the trigger type is periodic. You can specify the parameter values for SourceDetail only for custom rules.

EventSource -> (string)

The source of the event, such as an AWS service, that triggers AWS Config to evaluate your AWS resources.

MessageType -> (string)

The type of notification that triggers AWS Config to run an evaluation for a rule. You can specify the following notification types:

ConfigurationItemChangeNotification - Triggers an evaluation when AWS Config delivers a configuration item as a result of a resource change.

OversizedConfigurationItemChangeNotification - Triggers an evaluation when AWS Config delivers an oversized configuration item. AWS Config may generate this notification type when a resource changes and the notification exceeds the maximum size allowed by Amazon SNS.

ScheduledNotification - Triggers a periodic evaluation at the frequency specified for MaximumExecutionFrequency .

ConfigurationSnapshotDeliveryCompleted - Triggers a periodic evaluation when AWS Config delivers a configuration snapshot.

If you want your custom rule to be triggered by configuration changes, specify two SourceDetail objects, one for ConfigurationItemChangeNotification and one for OversizedConfigurationItemChangeNotification .

MaximumExecutionFrequency -> (string)

The frequency at which you want AWS Config to run evaluations for a custom rule with a periodic trigger. If you specify a value for MaximumExecutionFrequency , then MessageType must use the ScheduledNotification value.

Note

By default, rules with a periodic trigger are evaluated every 24 hours. To change the frequency, specify a valid value for the MaximumExecutionFrequency parameter.

Based on the valid value you choose, AWS Config runs evaluations once for each valid value. For example, if you choose Three_Hours , AWS Config runs evaluations once every three hours. In this case, Three_Hours is the frequency of this rule.

InputParameters -> (string)

A string, in JSON format, that is passed to the AWS Config rule Lambda function.

MaximumExecutionFrequency -> (string)

The maximum frequency with which AWS Config runs evaluations for a rule. You can specify a value for MaximumExecutionFrequency when:

You are using an AWS managed rule that is triggered at a periodic frequency.

Your custom rule is triggered when AWS Config delivers the configuration snapshot. For more information, see ConfigSnapshotDeliveryProperties .

Note

By default, rules with a periodic trigger are evaluated every 24 hours. To change the frequency, specify a valid value for the MaximumExecutionFrequency parameter.

ConfigRuleState -> (string)

Indicates whether the AWS Config rule is active or is currently being deleted by AWS Config. It can also indicate the evaluation status for the AWS Config rule.

AWS Config sets the state of the rule to EVALUATING temporarily after you use the StartConfigRulesEvaluation request to evaluate your resources against the AWS Config rule.

AWS Config sets the state of the rule to DELETING_RESULTS temporarily after you use the DeleteEvaluationResults request to delete the current evaluation results for the AWS Config rule.

AWS Config temporarily sets the state of a rule to DELETING after you use the DeleteConfigRule request to delete the rule. After AWS Config deletes the rule, the rule and all of its evaluations are erased and are no longer available.

CreatedBy -> (string)

Service principal name of the service that created the rule.

Note

The field is populated only if the service linked rule is created by a service. The field is empty if you create your own rule.

JSON Syntax:

{
  "ConfigRuleName": "string",
  "ConfigRuleArn": "string",
  "ConfigRuleId": "string",
  "Description": "string",
  "Scope": {
    "ComplianceResourceTypes": ["string", ...],
    "TagKey": "string",
    "TagValue": "string",
    "ComplianceResourceId": "string"
  },
  "Source": {
    "Owner": "CUSTOM_LAMBDA"|"AWS",
    "SourceIdentifier": "string",
    "SourceDetails": [
      {
        "EventSource": "aws.config",
        "MessageType": "ConfigurationItemChangeNotification"|"ConfigurationSnapshotDeliveryCompleted"|"ScheduledNotification"|"OversizedConfigurationItemChangeNotification",
        "MaximumExecutionFrequency": "One_Hour"|"Three_Hours"|"Six_Hours"|"Twelve_Hours"|"TwentyFour_Hours"
      }
      ...
    ]
  },
  "InputParameters": "string",
  "MaximumExecutionFrequency": "One_Hour"|"Three_Hours"|"Six_Hours"|"Twelve_Hours"|"TwentyFour_Hours",
  "ConfigRuleState": "ACTIVE"|"DELETING"|"DELETING_RESULTS"|"EVALUATING",
  "CreatedBy": "string"
}

--tags (list)

An array of tag object.

(structure)

The tags for the resource. The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

Key -> (string)

One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

Value -> (string)

The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

Shorthand Syntax:

Key=string,Value=string ...

JSON Syntax:

[
  {
    "Key": "string",
    "Value": "string"
  }
  ...
]

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

--cli-auto-prompt (boolean) Automatically prompt for CLI input parameters.

See ‘aws help’ for descriptions of global parameters.

Examples¶

To add an AWS managed Config rule

The following command provides JSON code to add an AWS managed Config rule:

aws configservice put-config-rule --config-rule file://RequiredTagsForEC2Instances.json

RequiredTagsForEC2Instances.json is a JSON file that contains the rule configuration:

{
  "ConfigRuleName": "RequiredTagsForEC2Instances",
  "Description": "Checks whether the CostCenter and Owner tags are applied to EC2 instances.",
  "Scope": {
    "ComplianceResourceTypes": [
      "AWS::EC2::Instance"
    ]
  },
  "Source": {
    "Owner": "AWS",
    "SourceIdentifier": "REQUIRED_TAGS"
  },
  "InputParameters": "{\"tag1Key\":\"CostCenter\",\"tag2Key\":\"Owner\"}"
}

For the ComplianceResourceTypes attribute, this JSON code limits the scope to resources of the AWS::EC2::Instance type, so AWS Config will evaluate only EC2 instances against the rule. Because the rule is a managed rule, the Owner attribute is set to AWS, and the SourceIdentifier attribute is set to the rule identifier, REQUIRED_TAGS. For the InputParameters attribute, the tag keys that the rule requires, CostCenter and Owner, are specified.

If the command succeeds, AWS Config returns no output. To verify the rule configuration, run the describe-config-rules command, and specify the rule name.

To add a customer managed Config rule

The following command provides JSON code to add a customer managed Config rule:

aws configservice put-config-rule --config-rule file://InstanceTypesAreT2micro.json

InstanceTypesAreT2micro.json is a JSON file that contains the rule configuration:

{
  "ConfigRuleName": "InstanceTypesAreT2micro",
  "Description": "Evaluates whether EC2 instances are the t2.micro type.",
  "Scope": {
    "ComplianceResourceTypes": [
      "AWS::EC2::Instance"
    ]
  },
  "Source": {
    "Owner": "CUSTOM_LAMBDA",
    "SourceIdentifier": "arn:aws:lambda:us-east-1:123456789012:function:InstanceTypeCheck",
    "SourceDetails": [
      {
        "EventSource": "aws.config",
        "MessageType": "ConfigurationItemChangeNotification"
      }
    ]
  },
  "InputParameters": "{\"desiredInstanceType\":\"t2.micro\"}"
}

For the ComplianceResourceTypes attribute, this JSON code limits the scope to resources of the AWS::EC2::Instance type, so AWS Config will evaluate only EC2 instances against the rule. Because this rule is a customer managed rule, the Owner attribute is set to CUSTOM_LAMBDA, and the SourceIdentifier attribute is set to the ARN of the AWS Lambda function. The SourceDetails object is required. The parameters that are specified for the InputParameters attribute are passed to the AWS Lambda function when AWS Config invokes it to evaluate resources against the rule.

If the command succeeds, AWS Config returns no output. To verify the rule configuration, run the describe-config-rules command, and specify the rule name.

Output¶

None

Table of Contents

Feedback

User Guide