AWS CLI Command Reference

[ aws . firehose ]

update-destination

Description

Updates the specified destination of the specified delivery stream.

Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.

Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.

If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is maintained on the destination.

If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.

Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using DescribeDeliveryStream . Use the new version ID to set CurrentDeliveryStreamVersionId in the next call.

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  update-destination
--delivery-stream-name <value>
--current-delivery-stream-version-id <value>
--destination-id <value>
[--s3-destination-update <value>]
[--extended-s3-destination-update <value>]
[--redshift-destination-update <value>]
[--elasticsearch-destination-update <value>]
[--splunk-destination-update <value>]
[--http-endpoint-destination-update <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--delivery-stream-name (string)

The name of the delivery stream.

--current-delivery-stream-version-id (string)

Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.

--destination-id (string)

The ID of the destination.

--s3-destination-update (structure)

[Deprecated] Describes an update for a destination in Amazon S3.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

Shorthand Syntax:

RoleARN=string,BucketARN=string,Prefix=string,ErrorOutputPrefix=string,BufferingHints={SizeInMBs=integer,IntervalInSeconds=integer},CompressionFormat=string,EncryptionConfiguration={NoEncryptionConfig=string,KMSEncryptionConfig={AWSKMSKeyARN=string}},CloudWatchLoggingOptions={Enabled=boolean,LogGroupName=string,LogStreamName=string}

JSON Syntax:

{
  "RoleARN": "string",
  "BucketARN": "string",
  "Prefix": "string",
  "ErrorOutputPrefix": "string",
  "BufferingHints": {
    "SizeInMBs": integer,
    "IntervalInSeconds": integer
  },
  "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
  "EncryptionConfiguration": {
    "NoEncryptionConfig": "NoEncryption",
    "KMSEncryptionConfig": {
      "AWSKMSKeyARN": "string"
    }
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  }
}

--extended-s3-destination-update (structure)

Describes an update for a destination in Amazon S3.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The Amazon CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

ProcessingConfiguration -> (structure)

The data processing configuration.

Enabled -> (boolean)

Enables or disables data processing.

Processors -> (list)

The data processors.

(structure)

Describes a data processor.

Type -> (string)

The type of processor.

Parameters -> (list)

The processor parameters.

(structure)

Describes the processor parameter.

ParameterName -> (string)

The name of the parameter.

ParameterValue -> (string)

The parameter value.

S3BackupMode -> (string)

You can update a delivery stream to enable Amazon S3 backup if it is disabled. If backup is enabled, you can’t update the delivery stream to disable it.

S3BackupUpdate -> (structure)

The Amazon S3 destination for backup.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

DataFormatConversionConfiguration -> (structure)

The serializer, deserializer, and schema for converting data from the JSON format to the Parquet or ORC format before writing it to Amazon S3.

SchemaConfiguration -> (structure)

Specifies the AWS Glue Data Catalog table that contains the column information. This parameter is required if Enabled is set to true.

RoleARN -> (string)

The role that Kinesis Data Firehose can use to access AWS Glue. This role must be in the same account you use for Kinesis Data Firehose. Cross-account roles aren’t allowed.

CatalogId -> (string)

The ID of the AWS Glue Data Catalog. If you don’t supply this, the AWS account ID is used by default.

DatabaseName -> (string)

Specifies the name of the AWS Glue database that contains the schema for the output data.

TableName -> (string)

Specifies the AWS Glue table that contains the column information that constitutes your data schema.

Region -> (string)

If you don’t specify an AWS Region, the default is the current Region.

VersionId -> (string)

Specifies the table version for the output data schema. If you don’t specify this version ID, or if you set it to LATEST , Kinesis Data Firehose uses the most recent version. This means that any updates to the table are automatically picked up.

InputFormatConfiguration -> (structure)

Specifies the deserializer that you want Kinesis Data Firehose to use to convert the format of your data from JSON. This parameter is required if Enabled is set to true.

Deserializer -> (structure)

Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the request.

OpenXJsonSerDe -> (structure)

The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.

ConvertDotsInJsonKeysToUnderscores -> (boolean)

When set to true , specifies that the names of the keys include dots and that you want Kinesis Data Firehose to replace them with underscores. This is useful because Apache Hive does not allow dots in column names. For example, if the JSON contains a key whose name is “a.b”, you can define the column name to be “a_b” when using this option.

The default is false .

CaseInsensitive -> (boolean)

When set to true , which is the default, Kinesis Data Firehose converts JSON keys to lowercase before deserializing them.

ColumnToJsonKeyMappings -> (map)

Maps column names to JSON keys that aren’t identical to the column names. This is useful when the JSON contains keys that are Hive keywords. For example, timestamp is a Hive keyword. If you have a JSON key named timestamp , set this parameter to {"ts": "timestamp"} to map this key to a column named ts .

key -> (string)

value -> (string)

HiveJsonSerDe -> (structure)

The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.

TimestampFormats -> (list)

Indicates how you want Kinesis Data Firehose to parse the date and timestamps that may be present in your input data JSON. To specify these format strings, follow the pattern syntax of JodaTime’s DateTimeFormat format strings. For more information, see Class DateTimeFormat . You can also use the special value millis to parse timestamps in epoch milliseconds. If you don’t specify a format, Kinesis Data Firehose uses java.sql.Timestamp::valueOf by default.

(string)

OutputFormatConfiguration -> (structure)

Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data to the Parquet or ORC format. This parameter is required if Enabled is set to true.

Serializer -> (structure)

Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet SerDe. If both are non-null, the server rejects the request.

ParquetSerDe -> (structure)

A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet .

BlockSizeBytes -> (integer)

The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.

PageSizeBytes -> (integer)

The Parquet page size. Column chunks are divided into pages. A page is conceptually an indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and the default is 1 MiB.

Compression -> (string)

The compression code to use over data blocks. The possible values are UNCOMPRESSED , SNAPPY , and GZIP , with the default being SNAPPY . Use SNAPPY for higher decompression speed. Use GZIP if the compression ratio is more important than speed.

EnableDictionaryCompression -> (boolean)

Indicates whether to enable dictionary compression.

MaxPaddingBytes -> (integer)

The maximum amount of padding to apply. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 0.

WriterVersion -> (string)

Indicates the version of row format to output. The possible values are V1 and V2 . The default is V1 .

OrcSerDe -> (structure)

A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC .

StripeSizeBytes -> (integer)

The number of bytes in each stripe. The default is 64 MiB and the minimum is 8 MiB.

BlockSizeBytes -> (integer)

The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.

RowIndexStride -> (integer)

The number of rows between index entries. The default is 10,000 and the minimum is 1,000.

EnablePadding -> (boolean)

Set this to true to indicate that you want stripes to be padded to the HDFS block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is false .

PaddingTolerance -> (double)

A number between 0 and 1 that defines the tolerance for block padding as a decimal fraction of stripe size. The default value is 0.05, which means 5 percent of stripe size.

For the default values of 64 MiB ORC stripes and 256 MiB HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum of 3.2 MiB for padding within the 256 MiB block. In such a case, if the available size within the block is more than 3.2 MiB, a new, smaller stripe is inserted to fit within that space. This ensures that no stripe crosses block boundaries and causes remote reads within a node-local task.

Kinesis Data Firehose ignores this parameter when OrcSerDe$EnablePadding is false .

Compression -> (string)

The compression code to use over data blocks. The default is SNAPPY .

BloomFilterColumns -> (list)

The column names for which you want Kinesis Data Firehose to create bloom filters. The default is null .

(string)

BloomFilterFalsePositiveProbability -> (double)

The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.

DictionaryKeyThreshold -> (double)

Represents the fraction of the total number of non-null rows. To turn off dictionary encoding, set this fraction to a number that is less than the number of distinct keys in a dictionary. To always use dictionary encoding, set this threshold to 1.

FormatVersion -> (string)

The version of the file to write. The possible values are V0_11 and V0_12 . The default is V0_12 .

Enabled -> (boolean)

Defaults to true . Set it to false if you want to disable format conversion while preserving the configuration details.

JSON Syntax:

{
  "RoleARN": "string",
  "BucketARN": "string",
  "Prefix": "string",
  "ErrorOutputPrefix": "string",
  "BufferingHints": {
    "SizeInMBs": integer,
    "IntervalInSeconds": integer
  },
  "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
  "EncryptionConfiguration": {
    "NoEncryptionConfig": "NoEncryption",
    "KMSEncryptionConfig": {
      "AWSKMSKeyARN": "string"
    }
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  },
  "ProcessingConfiguration": {
    "Enabled": true|false,
    "Processors": [
      {
        "Type": "Lambda",
        "Parameters": [
          {
            "ParameterName": "LambdaArn"|"NumberOfRetries"|"RoleArn"|"BufferSizeInMBs"|"BufferIntervalInSeconds",
            "ParameterValue": "string"
          }
          ...
        ]
      }
      ...
    ]
  },
  "S3BackupMode": "Disabled"|"Enabled",
  "S3BackupUpdate": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  },
  "DataFormatConversionConfiguration": {
    "SchemaConfiguration": {
      "RoleARN": "string",
      "CatalogId": "string",
      "DatabaseName": "string",
      "TableName": "string",
      "Region": "string",
      "VersionId": "string"
    },
    "InputFormatConfiguration": {
      "Deserializer": {
        "OpenXJsonSerDe": {
          "ConvertDotsInJsonKeysToUnderscores": true|false,
          "CaseInsensitive": true|false,
          "ColumnToJsonKeyMappings": {"string": "string"
            ...}
        },
        "HiveJsonSerDe": {
          "TimestampFormats": ["string", ...]
        }
      }
    },
    "OutputFormatConfiguration": {
      "Serializer": {
        "ParquetSerDe": {
          "BlockSizeBytes": integer,
          "PageSizeBytes": integer,
          "Compression": "UNCOMPRESSED"|"GZIP"|"SNAPPY",
          "EnableDictionaryCompression": true|false,
          "MaxPaddingBytes": integer,
          "WriterVersion": "V1"|"V2"
        },
        "OrcSerDe": {
          "StripeSizeBytes": integer,
          "BlockSizeBytes": integer,
          "RowIndexStride": integer,
          "EnablePadding": true|false,
          "PaddingTolerance": double,
          "Compression": "NONE"|"ZLIB"|"SNAPPY",
          "BloomFilterColumns": ["string", ...],
          "BloomFilterFalsePositiveProbability": double,
          "DictionaryKeyThreshold": double,
          "FormatVersion": "V0_11"|"V0_12"
        }
      }
    },
    "Enabled": true|false
  }
}

--redshift-destination-update (structure)

Describes an update for a destination in Amazon Redshift.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

ClusterJDBCURL -> (string)

The database connection string.

CopyCommand -> (structure)

The COPY command.

DataTableName -> (string)

The name of the target table. The table must already exist in the database.

DataTableColumns -> (string)

A comma-separated list of column names.

CopyOptions -> (string)

Optional parameters to use with the Amazon Redshift COPY command. For more information, see the “Optional Parameters” section of Amazon Redshift COPY command . Some possible examples that would apply to Kinesis Data Firehose are as follows:

delimiter '\t' lzop; - fields are delimited with “t” (TAB character) and compressed using lzop.

delimiter '|' - fields are delimited with “|” (this is the default delimiter).

delimiter '|' escape - the delimiter should be escaped.

fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6' - fields are fixed width in the source, with each width specified after every column in the table.

JSON 's3://mybucket/jsonpaths.txt' - data is in JSON format, and the path specified is the format of the data.

For more examples, see Amazon Redshift COPY command examples .

Username -> (string)

The name of the user.

Password -> (string)

The user password.

RetryOptions -> (structure)

The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift. Default value is 3600 (60 minutes).

DurationInSeconds -> (integer)

The length of time during which Kinesis Data Firehose retries delivery after a failure, starting from the initial request and including the first attempt. The default value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt takes longer than the current value.

S3Update -> (structure)

The Amazon S3 destination.

The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationUpdate.S3Update because the Amazon Redshift COPY operation that reads from the S3 bucket doesn’t support these compression formats.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

ProcessingConfiguration -> (structure)

The data processing configuration.

Enabled -> (boolean)

Enables or disables data processing.

Processors -> (list)

The data processors.

(structure)

Describes a data processor.

Type -> (string)

The type of processor.

Parameters -> (list)

The processor parameters.

(structure)

Describes the processor parameter.

ParameterName -> (string)

The name of the parameter.

ParameterValue -> (string)

The parameter value.

S3BackupMode -> (string)

You can update a delivery stream to enable Amazon S3 backup if it is disabled. If backup is enabled, you can’t update the delivery stream to disable it.

S3BackupUpdate -> (structure)

The Amazon S3 destination for backup.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

CloudWatchLoggingOptions -> (structure)

The Amazon CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

JSON Syntax:

{
  "RoleARN": "string",
  "ClusterJDBCURL": "string",
  "CopyCommand": {
    "DataTableName": "string",
    "DataTableColumns": "string",
    "CopyOptions": "string"
  },
  "Username": "string",
  "Password": "string",
  "RetryOptions": {
    "DurationInSeconds": integer
  },
  "S3Update": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  },
  "ProcessingConfiguration": {
    "Enabled": true|false,
    "Processors": [
      {
        "Type": "Lambda",
        "Parameters": [
          {
            "ParameterName": "LambdaArn"|"NumberOfRetries"|"RoleArn"|"BufferSizeInMBs"|"BufferIntervalInSeconds",
            "ParameterValue": "string"
          }
          ...
        ]
      }
      ...
    ]
  },
  "S3BackupMode": "Disabled"|"Enabled",
  "S3BackupUpdate": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  }
}

--elasticsearch-destination-update (structure)

Describes an update for a destination in Amazon ES.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose for calling the Amazon ES Configuration API and for indexing documents. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination and Amazon Resource Names (ARNs) and AWS Service Namespaces .

DomainARN -> (string)

The ARN of the Amazon ES domain. The IAM role must have permissions for DescribeElasticsearchDomain , DescribeElasticsearchDomains , and DescribeElasticsearchDomainConfig after assuming the IAM role specified in RoleARN . For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Specify either ClusterEndpoint or DomainARN .

ClusterEndpoint -> (string)

The endpoint to use when communicating with the cluster. Specify either this ClusterEndpoint or the DomainARN field.

IndexName -> (string)

The Elasticsearch index name.

TypeName -> (string)

The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per index. If you try to specify a new type for an existing index that already has another type, Kinesis Data Firehose returns an error during runtime.

If you upgrade Elasticsearch from 6.x to 7.x and don’t update your delivery stream, Kinesis Data Firehose still delivers data to Elasticsearch with the old index name and type name. If you want to update your delivery stream with a new index name, provide an empty string for TypeName .

IndexRotationPeriod -> (string)

The Elasticsearch index rotation period. Index rotation appends a timestamp to IndexName to facilitate the expiration of old data. For more information, see Index Rotation for the Amazon ES Destination . Default value is OneDay .

BufferingHints -> (structure)

The buffering options. If no value is specified, ElasticsearchBufferingHints object default values are used.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.

RetryOptions -> (structure)

The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon ES. The default value is 300 (5 minutes).

DurationInSeconds -> (integer)

After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.

S3Update -> (structure)

The Amazon S3 destination.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

ProcessingConfiguration -> (structure)

The data processing configuration.

Enabled -> (boolean)

Enables or disables data processing.

Processors -> (list)

The data processors.

(structure)

Describes a data processor.

Type -> (string)

The type of processor.

Parameters -> (list)

The processor parameters.

(structure)

Describes the processor parameter.

ParameterName -> (string)

The name of the parameter.

ParameterValue -> (string)

The parameter value.

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

JSON Syntax:

{
  "RoleARN": "string",
  "DomainARN": "string",
  "ClusterEndpoint": "string",
  "IndexName": "string",
  "TypeName": "string",
  "IndexRotationPeriod": "NoRotation"|"OneHour"|"OneDay"|"OneWeek"|"OneMonth",
  "BufferingHints": {
    "IntervalInSeconds": integer,
    "SizeInMBs": integer
  },
  "RetryOptions": {
    "DurationInSeconds": integer
  },
  "S3Update": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  },
  "ProcessingConfiguration": {
    "Enabled": true|false,
    "Processors": [
      {
        "Type": "Lambda",
        "Parameters": [
          {
            "ParameterName": "LambdaArn"|"NumberOfRetries"|"RoleArn"|"BufferSizeInMBs"|"BufferIntervalInSeconds",
            "ParameterValue": "string"
          }
          ...
        ]
      }
      ...
    ]
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  }
}

--splunk-destination-update (structure)

Describes an update for a destination in Splunk.

HECEndpoint -> (string)

The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your data.

HECEndpointType -> (string)

This type can be either “Raw” or “Event.”

HECToken -> (string)

A GUID that you obtain from your Splunk cluster when you create a new HEC endpoint.

HECAcknowledgmentTimeoutInSeconds -> (integer)

The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from Splunk after it sends data. At the end of the timeout period, Kinesis Data Firehose either tries to send the data again or considers it an error, based on your retry settings.

RetryOptions -> (structure)

The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk or if it doesn’t receive an acknowledgment of receipt from Splunk.

DurationInSeconds -> (integer)

The total amount of time that Kinesis Data Firehose spends on retries. This duration starts after the initial attempt to send data to Splunk fails. It doesn’t include the periods during which Kinesis Data Firehose waits for acknowledgment from Splunk after each attempt.

S3BackupMode -> (string)

Specifies how you want Kinesis Data Firehose to back up documents to Amazon S3. When set to FailedDocumentsOnly , Kinesis Data Firehose writes any data that could not be indexed to the configured Amazon S3 destination. When set to AllEvents , Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents to Amazon S3. The default value is FailedEventsOnly .

You can update this backup mode from FailedEventsOnly to AllEvents . You can’t update it from AllEvents to FailedEventsOnly .

S3Update -> (structure)

Your update to the configuration of the backup Amazon S3 location.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

ProcessingConfiguration -> (structure)

The data processing configuration.

Enabled -> (boolean)

Enables or disables data processing.

Processors -> (list)

The data processors.

(structure)

Describes a data processor.

Type -> (string)

The type of processor.

Parameters -> (list)

The processor parameters.

(structure)

Describes the processor parameter.

ParameterName -> (string)

The name of the parameter.

ParameterValue -> (string)

The parameter value.

CloudWatchLoggingOptions -> (structure)

The Amazon CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

JSON Syntax:

{
  "HECEndpoint": "string",
  "HECEndpointType": "Raw"|"Event",
  "HECToken": "string",
  "HECAcknowledgmentTimeoutInSeconds": integer,
  "RetryOptions": {
    "DurationInSeconds": integer
  },
  "S3BackupMode": "FailedEventsOnly"|"AllEvents",
  "S3Update": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  },
  "ProcessingConfiguration": {
    "Enabled": true|false,
    "Processors": [
      {
        "Type": "Lambda",
        "Parameters": [
          {
            "ParameterName": "LambdaArn"|"NumberOfRetries"|"RoleArn"|"BufferSizeInMBs"|"BufferIntervalInSeconds",
            "ParameterValue": "string"
          }
          ...
        ]
      }
      ...
    ]
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  }
}

--http-endpoint-destination-update (structure)

Describes an update to the specified HTTP endpoint destination.

EndpointConfiguration -> (structure)

Describes the configuration of the HTTP endpoint destination.

Url -> (string)

The URL of the HTTP endpoint selected as the destination.

Name -> (string)

The name of the HTTP endpoint selected as the destination.

AccessKey -> (string)

The access key required for Kinesis Firehose to authenticate with the HTTP endpoint selected as the destination.

BufferingHints -> (structure)

Describes buffering options that can be applied to the data before it is delivered to the HTTPS endpoint destination. Kinesis Data Firehose teats these options as hints, and it might choose to use more optimal values. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).

CloudWatchLoggingOptions -> (structure)

Describes the Amazon CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

RequestConfiguration -> (structure)

The configuration of the request sent to the HTTP endpoint specified as the destination.

ContentEncoding -> (string)

Kinesis Data Firehose uses the content encoding to compress the body of a request before sending the request to the destination. For more information, see Content-Encoding in MDN Web Docs, the official Mozilla documentation.

CommonAttributes -> (list)

Describes the metadata sent to the HTTP endpoint destination.

(structure)

Describes the metadata that’s delivered to the specified HTTP endpoint destination.

AttributeName -> (string)

The name of the HTTP endpoint common attribute.

AttributeValue -> (string)

The value of the HTTP endpoint common attribute.

ProcessingConfiguration -> (structure)

Describes a data processing configuration.

Enabled -> (boolean)

Enables or disables data processing.

Processors -> (list)

The data processors.

(structure)

Describes a data processor.

Type -> (string)

The type of processor.

Parameters -> (list)

The processor parameters.

(structure)

Describes the processor parameter.

ParameterName -> (string)

The name of the parameter.

ParameterValue -> (string)

The parameter value.

RoleARN -> (string)

Kinesis Data Firehose uses this IAM role for all the permissions that the delivery stream needs.

RetryOptions -> (structure)

Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to the specified HTTP endpoint destination, or if it doesn’t receive a valid acknowledgment of receipt from the specified HTTP endpoint destination.

DurationInSeconds -> (integer)

The total amount of time that Kinesis Data Firehose spends on retries. This duration starts after the initial attempt to send data to the custom destination via HTTPS endpoint fails. It doesn’t include the periods during which Kinesis Data Firehose waits for acknowledgment from the specified destination after each attempt.

S3BackupMode -> (string)

Describes the S3 bucket backup options for the data that Kinesis Firehose delivers to the HTTP endpoint destination. You can back up all documents (AllData ) or only the documents that Kinesis Data Firehose could not deliver to the specified HTTP endpoint destination (FailedDataOnly ).

S3Update -> (structure)

Describes an update for a destination in Amazon S3.

RoleARN -> (string)

The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

BucketARN -> (string)

The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

Prefix -> (string)

The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .

ErrorOutputPrefix -> (string)

A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .

BufferingHints -> (structure)

The buffering option. If no value is specified, BufferingHints object default values are used.

SizeInMBs -> (integer)

Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.

We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.

IntervalInSeconds -> (integer)

Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.

CompressionFormat -> (string)

The compression format. If no value is specified, the default is UNCOMPRESSED .

The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.

EncryptionConfiguration -> (structure)

The encryption configuration. If no value is specified, the default is no encryption.

NoEncryptionConfig -> (string)

Specifically override existing encryption information to ensure that no encryption is used.

KMSEncryptionConfig -> (structure)

The encryption key.

AWSKMSKeyARN -> (string)

The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .

CloudWatchLoggingOptions -> (structure)

The CloudWatch logging options for your delivery stream.

Enabled -> (boolean)

Enables or disables CloudWatch logging.

LogGroupName -> (string)

The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.

LogStreamName -> (string)

The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.

JSON Syntax:

{
  "EndpointConfiguration": {
    "Url": "string",
    "Name": "string",
    "AccessKey": "string"
  },
  "BufferingHints": {
    "SizeInMBs": integer,
    "IntervalInSeconds": integer
  },
  "CloudWatchLoggingOptions": {
    "Enabled": true|false,
    "LogGroupName": "string",
    "LogStreamName": "string"
  },
  "RequestConfiguration": {
    "ContentEncoding": "NONE"|"GZIP",
    "CommonAttributes": [
      {
        "AttributeName": "string",
        "AttributeValue": "string"
      }
      ...
    ]
  },
  "ProcessingConfiguration": {
    "Enabled": true|false,
    "Processors": [
      {
        "Type": "Lambda",
        "Parameters": [
          {
            "ParameterName": "LambdaArn"|"NumberOfRetries"|"RoleArn"|"BufferSizeInMBs"|"BufferIntervalInSeconds",
            "ParameterValue": "string"
          }
          ...
        ]
      }
      ...
    ]
  },
  "RoleARN": "string",
  "RetryOptions": {
    "DurationInSeconds": integer
  },
  "S3BackupMode": "FailedDataOnly"|"AllData",
  "S3Update": {
    "RoleARN": "string",
    "BucketARN": "string",
    "Prefix": "string",
    "ErrorOutputPrefix": "string",
    "BufferingHints": {
      "SizeInMBs": integer,
      "IntervalInSeconds": integer
    },
    "CompressionFormat": "UNCOMPRESSED"|"GZIP"|"ZIP"|"Snappy"|"HADOOP_SNAPPY",
    "EncryptionConfiguration": {
      "NoEncryptionConfig": "NoEncryption",
      "KMSEncryptionConfig": {
        "AWSKMSKeyARN": "string"
      }
    },
    "CloudWatchLoggingOptions": {
      "Enabled": true|false,
      "LogGroupName": "string",
      "LogStreamName": "string"
    }
  }
}

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Output

None

© Copyright 2018, Amazon Web Services. Created using Sphinx.