put-event-selectors¶

Description¶

Configures an event selector or advanced event selectors for your trail. Use event selectors or advanced event selectors to specify management and data event settings for your trail. By default, trails created without specific event selectors are configured to log all read and write management events, and no data events.

When an event occurs in your account, CloudTrail evaluates the event selectors or advanced event selectors in all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn’t match any event selector, the trail doesn’t log the event.

Example

You create an event selector for a trail and specify that you want write-only events.
The EC2 GetConsoleOutput and RunInstances API operations occur in your account.
CloudTrail evaluates whether the events match your event selectors.
The RunInstances is a write-only event and it matches your event selector. The trail logs the event.
The GetConsoleOutput is a read-only event that doesn’t match your event selector. The trail doesn’t log the event.

The PutEventSelectors operation must be called from the region in which the trail was created; otherwise, an InvalidHomeRegionException exception is thrown.

You can configure up to five event selectors for each trail. For more information, see Logging data and management events for trails and Quotas in CloudTrail in the CloudTrail User Guide .

You can add advanced event selectors, and conditions for your advanced event selectors, up to a maximum of 500 values for all conditions and selectors on a trail. You can use either AdvancedEventSelectors or EventSelectors , but not both. If you apply AdvancedEventSelectors to a trail, any existing EventSelectors are overwritten. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .

Synopsis¶

  put-event-selectors
--trail-name <value>
[--event-selectors <value>]
[--advanced-event-selectors <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options¶

--trail-name (string)

Specifies the name of the trail or trail ARN. If you specify a trail name, the string must meet the following requirements:

Contain only ASCII letters (a-z, A-Z), numbers (0-9), periods (.), underscores (_), or dashes (-)

Start with a letter or number, and end with a letter or number

Be between 3 and 128 characters

Have no adjacent periods, underscores or dashes. Names like my-_namespace and my--namespace are not valid.

Not be in IP address format (for example, 192.168.5.4)

If you specify a trail ARN, it must be in the following format.

arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail

--event-selectors (list)

Specifies the settings for your event selectors. You can configure up to five event selectors for a trail. You can use either EventSelectors or AdvancedEventSelectors in a PutEventSelectors request, but not both. If you apply EventSelectors to a trail, any existing AdvancedEventSelectors are overwritten.

(structure)

Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events. When an event occurs in your account, CloudTrail evaluates the event selector for all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn’t match any event selector, the trail doesn’t log the event.

You can configure up to five event selectors for a trail.

You cannot apply both event selectors and advanced event selectors to a trail.

ReadWriteType -> (string)

Specify if you want your trail to log read-only events, write-only events, or all. For example, the EC2 GetConsoleOutput is a read-only API operation and RunInstances is a write-only API operation.

By default, the value is All .

IncludeManagementEvents -> (boolean)

Specify if you want your event selector to include management events for your trail.

For more information, see Management Events in the CloudTrail User Guide .

By default, the value is true .

The first copy of management events is free. You are charged for additional copies of management events that you are logging on any subsequent trail in the same region. For more information about CloudTrail pricing, see CloudTrail Pricing .

DataResources -> (list)

CloudTrail supports data event logging for Amazon S3 objects, Lambda functions, and Amazon DynamoDB tables with basic event selectors. You can specify up to 250 resources for an individual event selector, but the total number of data resources cannot exceed 250 across all event selectors in a trail. This limit does not apply if you configure resource logging for all data events.

For more information, see Data Events and Limits in CloudTrail in the CloudTrail User Guide .

(structure)

The Amazon S3 buckets, Lambda functions, or Amazon DynamoDB tables that you specify in your event selectors for your trail to log data events. Data events provide information about the resource operations performed on or within a resource itself. These are also known as data plane operations. You can specify up to 250 data resources for a trail.

Note

The total number of allowed data resources is 250. This number can be distributed between 1 and 5 event selectors, but the total cannot exceed 250 across all selectors.

If you are using advanced event selectors, the maximum total number of values for all conditions, across all advanced event selectors for the trail, is 500.

The following example demonstrates how logging works when you configure logging of all data events for an S3 bucket named bucket-1 . In this example, the CloudTrail user specified an empty prefix, and the option to log both Read and Write data events.

A user uploads an image file to bucket-1 .

The PutObject API operation is an Amazon S3 object-level API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified an S3 bucket with an empty prefix, events that occur on any object in that bucket are logged. The trail processes and logs the event.

A user uploads an object to an Amazon S3 bucket named arn:aws:s3:::bucket-2 .

The PutObject API operation occurred for an object in an S3 bucket that the CloudTrail user didn’t specify for the trail. The trail doesn’t log the event.

The following example demonstrates how logging works when you configure logging of Lambda data events for a Lambda function named MyLambdaFunction , but not for all Lambda functions.

A user runs a script that includes a call to the MyLambdaFunction function and the MyOtherLambdaFunction function.

The Invoke API operation on MyLambdaFunction is an Lambda API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified logging data events for MyLambdaFunction , any invocations of that function are logged. The trail processes and logs the event.

The Invoke API operation on MyOtherLambdaFunction is an Lambda API. Because the CloudTrail user did not specify logging data events for all Lambda functions, the Invoke operation for MyOtherLambdaFunction does not match the function specified for the trail. The trail doesn’t log the event.

Type -> (string)

The resource type in which you want to log data events. You can specify AWS::S3::Object , AWS::Lambda::Function , or AWS::DynamoDB::Table resources.

The AWS::S3Outposts::Object , AWS::ManagedBlockchain::Node , AWS::S3ObjectLambda::AccessPoint , and AWS::EC2::Snapshot resource types are not valid in basic event selectors. To log data events on these resource types, use advanced event selectors.

Values -> (list)

An array of Amazon Resource Name (ARN) strings or partial ARN strings for the specified objects.

To log data events for all objects in all S3 buckets in your Amazon Web Services account, specify the prefix as arn:aws:s3::: .

Note

This also enables logging of data event activity performed by any user or role in your Amazon Web Services account, even if that activity is performed on a bucket that belongs to another Amazon Web Services account.

To log data events for all objects in an S3 bucket, specify the bucket and an empty object prefix such as arn:aws:s3:::bucket-1/ . The trail logs data events for all objects in this S3 bucket.

To log data events for specific objects, specify the S3 bucket and object prefix such as arn:aws:s3:::bucket-1/example-images . The trail logs data events for objects in this S3 bucket that match the prefix.

To log data events for all Lambda functions in your Amazon Web Services account, specify the prefix as arn:aws:lambda .

Note

This also enables logging of Invoke activity performed by any user or role in your Amazon Web Services account, even if that activity is performed on a function that belongs to another Amazon Web Services account.

To log data events for a specific Lambda function, specify the function ARN.

Note

Lambda function ARNs are exact. For example, if you specify a function ARN arn:aws:lambda:us-west-2:111111111111:function:helloworld , data events will only be logged for arn:aws:lambda:us-west-2:111111111111:function:helloworld . They will not be logged for arn:aws:lambda:us-west-2:111111111111:function:helloworld2 .

To log data events for all DynamoDB tables in your Amazon Web Services account, specify the prefix as arn:aws:dynamodb .

(string)

ExcludeManagementEventSources -> (list)

An optional list of service event sources from which you do not want management events to be logged on your trail. In this release, the list can be empty (disables the filter), or it can filter out Key Management Service or Amazon RDS Data API events by containing kms.amazonaws.com or rdsdata.amazonaws.com . By default, ExcludeManagementEventSources is empty, and KMS and Amazon RDS Data API events are logged to your trail.

(string)

JSON Syntax:

[
  {
    "ReadWriteType": "ReadOnly"|"WriteOnly"|"All",
    "IncludeManagementEvents": true|false,
    "DataResources": [
      {
        "Type": "string",
        "Values": ["string", ...]
      }
      ...
    ],
    "ExcludeManagementEventSources": ["string", ...]
  }
  ...
]

--advanced-event-selectors (list)

Specifies the settings for advanced event selectors. You can add advanced event selectors, and conditions for your advanced event selectors, up to a maximum of 500 values for all conditions and selectors on a trail. You can use either AdvancedEventSelectors or EventSelectors , but not both. If you apply AdvancedEventSelectors to a trail, any existing EventSelectors are overwritten. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .

(structure)

Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record ﬁelds. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .

readOnly

eventSource

eventName

eventCategory

resources.type

resources.ARN

You cannot apply both event selectors and advanced event selectors to a trail.

Name -> (string)

An optional, descriptive name for an advanced event selector, such as “Log data events for only two S3 buckets”.

FieldSelectors -> (list)

Contains all selector statements in an advanced event selector.

(structure)

A single selector statement in an advanced event selector.

Field -> (string)

A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .

**readOnly ** - Optional. Can be set to Equals a value of true or false . A value of false logs both read and write events.

**eventSource ** - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .

**eventName ** - Can use any operator. You can use it to ﬁlter in or ﬁlter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this ﬁeld, separated by commas.

**eventCategory ** - This is required. It must be set to Equals , and the value must be Management or Data .

**resources.type ** - This ﬁeld is required. resources.type can only use the Equals operator, and the value can be one of the following: AWS::S3::Object , AWS::S3::AccessPoint , AWS::Lambda::Function , AWS::DynamoDB::Table , AWS::S3Outposts::Object , AWS::ManagedBlockchain::Node , AWS::S3ObjectLambda::AccessPoint , or AWS::EC2::Snapshot . You can have only one resources.type ﬁeld per selector. To log data events on more than one resource type, add another selector.

**resources.ARN ** - You can use any operator with resources.ARN, but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you’ve speciﬁed in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.

arn:<partition>:s3:::<bucket_name>/

arn:<partition>:s3:::<bucket_name>/<object_path>/

When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.

arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>

arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>

When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>

When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:dynamodb:<region>:<account_ID>:table:<table_name>

When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>

When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>

When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>

When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>

Equals -> (list)

An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.

(string)

StartsWith -> (list)

An operator that includes events that match the first few characters of the event record field specified as the value of Field .

(string)

EndsWith -> (list)

An operator that includes events that match the last few characters of the event record field specified as the value of Field .

(string)

NotEquals -> (list)

An operator that excludes events that match the exact value of the event record field specified as the value of Field .

(string)

NotStartsWith -> (list)

An operator that excludes events that match the first few characters of the event record field specified as the value of Field .

(string)

NotEndsWith -> (list)

An operator that excludes events that match the last few characters of the event record field specified as the value of Field .

(string)

JSON Syntax:

[
  {
    "Name": "string",
    "FieldSelectors": [
      {
        "Field": "string",
        "Equals": ["string", ...],
        "StartsWith": ["string", ...],
        "EndsWith": ["string", ...],
        "NotEquals": ["string", ...],
        "NotStartsWith": ["string", ...],
        "NotEndsWith": ["string", ...]
      }
      ...
    ]
  }
  ...
]

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples¶

To configure event selectors for a trail

To create an event selector, run the ‘’put-event-selectors’’ command. When an event occurs in your account, CloudTrail evaluates the configuration for your trails. If the event matches any event selector for a trail, the trail processes and logs the event. You can configure up to 5 event selectors for a trail and up to 250 data resources for a trail.

The following example creates an event selector for a trail named ‘’TrailName’’ to include read-only and write-only management events, data events for two Amazon S3 bucket/prefix combinations, and data events for a single AWS Lambda function named ‘’hello-world-python-function’’:

aws cloudtrail put-event-selectors --trail-name TrailName --event-selectors '[{"ReadWriteType": "All","IncludeManagementEvents": true,"DataResources": [{"Type":"AWS::S3::Object", "Values": ["arn:aws:s3:::mybucket/prefix","arn:aws:s3:::mybucket2/prefix2"]},{"Type": "AWS::Lambda::Function","Values": ["arn:aws:lambda:us-west-2:999999999999:function:hello-world-python-function"]}]}]'

Output:

{
  "EventSelectors": [
      {
          "IncludeManagementEvents": true,
          "DataResources": [
              {
                  "Values": [
                      "arn:aws:s3:::mybucket/prefix",
                      "arn:aws:s3:::mybucket2/prefix2"
                  ],
                  "Type": "AWS::S3::Object"
              },
              {
                  "Values": [
                      "arn:aws:lambda:us-west-2:123456789012:function:hello-world-python-function"
                  ],
                  "Type": "AWS::Lambda::Function"
              },
          ],
          "ReadWriteType": "All"
      }
  ],
  "TrailARN": "arn:aws:cloudtrail:us-east-2:123456789012:trail/TrailName"
}

The following example creates an event selector for a trail named ‘’TrailName2’’ that includes all events, including read-only and write-only management events, and all data events for all Amazon S3 buckets and AWS Lambda functions in the AWS account:

aws cloudtrail put-event-selectors --trail-name TrailName2 --event-selectors '[{"ReadWriteType": "All","IncludeManagementEvents": true,"DataResources": [{"Type":"AWS::S3::Object", "Values": ["arn:aws:s3:::"]},{"Type": "AWS::Lambda::Function","Values": ["arn:aws:lambda"]}]}]'

Output:

{
  "EventSelectors": [
      {
          "IncludeManagementEvents": true,
          "DataResources": [
              {
                  "Values": [
                      "arn:aws:s3:::"
                  ],
                  "Type": "AWS::S3::Object"
              },
              {
                  "Values": [
                      "arn:aws:lambda"
                  ],
                  "Type": "AWS::Lambda::Function"
              },
          ],
          "ReadWriteType": "All"
      }
  ],
  "TrailARN": "arn:aws:cloudtrail:us-east-2:123456789012:trail/TrailName2"
}

Output¶

TrailARN -> (string)

Specifies the ARN of the trail that was updated with event selectors. The following is the format of a trail ARN.

arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail

EventSelectors -> (list)

Specifies the event selectors configured for your trail.

(structure)

Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events. When an event occurs in your account, CloudTrail evaluates the event selector for all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn’t match any event selector, the trail doesn’t log the event.

You can configure up to five event selectors for a trail.

You cannot apply both event selectors and advanced event selectors to a trail.

ReadWriteType -> (string)

Specify if you want your trail to log read-only events, write-only events, or all. For example, the EC2 GetConsoleOutput is a read-only API operation and RunInstances is a write-only API operation.

By default, the value is All .

IncludeManagementEvents -> (boolean)

Specify if you want your event selector to include management events for your trail.

For more information, see Management Events in the CloudTrail User Guide .

By default, the value is true .

The first copy of management events is free. You are charged for additional copies of management events that you are logging on any subsequent trail in the same region. For more information about CloudTrail pricing, see CloudTrail Pricing .

DataResources -> (list)

CloudTrail supports data event logging for Amazon S3 objects, Lambda functions, and Amazon DynamoDB tables with basic event selectors. You can specify up to 250 resources for an individual event selector, but the total number of data resources cannot exceed 250 across all event selectors in a trail. This limit does not apply if you configure resource logging for all data events.

For more information, see Data Events and Limits in CloudTrail in the CloudTrail User Guide .

(structure)

The Amazon S3 buckets, Lambda functions, or Amazon DynamoDB tables that you specify in your event selectors for your trail to log data events. Data events provide information about the resource operations performed on or within a resource itself. These are also known as data plane operations. You can specify up to 250 data resources for a trail.

Note

The total number of allowed data resources is 250. This number can be distributed between 1 and 5 event selectors, but the total cannot exceed 250 across all selectors.

If you are using advanced event selectors, the maximum total number of values for all conditions, across all advanced event selectors for the trail, is 500.

The following example demonstrates how logging works when you configure logging of all data events for an S3 bucket named bucket-1 . In this example, the CloudTrail user specified an empty prefix, and the option to log both Read and Write data events.

A user uploads an image file to bucket-1 .

The PutObject API operation is an Amazon S3 object-level API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified an S3 bucket with an empty prefix, events that occur on any object in that bucket are logged. The trail processes and logs the event.

A user uploads an object to an Amazon S3 bucket named arn:aws:s3:::bucket-2 .

The PutObject API operation occurred for an object in an S3 bucket that the CloudTrail user didn’t specify for the trail. The trail doesn’t log the event.

The following example demonstrates how logging works when you configure logging of Lambda data events for a Lambda function named MyLambdaFunction , but not for all Lambda functions.

A user runs a script that includes a call to the MyLambdaFunction function and the MyOtherLambdaFunction function.

The Invoke API operation on MyLambdaFunction is an Lambda API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified logging data events for MyLambdaFunction , any invocations of that function are logged. The trail processes and logs the event.

The Invoke API operation on MyOtherLambdaFunction is an Lambda API. Because the CloudTrail user did not specify logging data events for all Lambda functions, the Invoke operation for MyOtherLambdaFunction does not match the function specified for the trail. The trail doesn’t log the event.

Type -> (string)

The resource type in which you want to log data events. You can specify AWS::S3::Object , AWS::Lambda::Function , or AWS::DynamoDB::Table resources.

The AWS::S3Outposts::Object , AWS::ManagedBlockchain::Node , AWS::S3ObjectLambda::AccessPoint , and AWS::EC2::Snapshot resource types are not valid in basic event selectors. To log data events on these resource types, use advanced event selectors.

Values -> (list)

An array of Amazon Resource Name (ARN) strings or partial ARN strings for the specified objects.

To log data events for all objects in all S3 buckets in your Amazon Web Services account, specify the prefix as arn:aws:s3::: .

Note

This also enables logging of data event activity performed by any user or role in your Amazon Web Services account, even if that activity is performed on a bucket that belongs to another Amazon Web Services account.

To log data events for all objects in an S3 bucket, specify the bucket and an empty object prefix such as arn:aws:s3:::bucket-1/ . The trail logs data events for all objects in this S3 bucket.

To log data events for specific objects, specify the S3 bucket and object prefix such as arn:aws:s3:::bucket-1/example-images . The trail logs data events for objects in this S3 bucket that match the prefix.

To log data events for all Lambda functions in your Amazon Web Services account, specify the prefix as arn:aws:lambda .

Note

This also enables logging of Invoke activity performed by any user or role in your Amazon Web Services account, even if that activity is performed on a function that belongs to another Amazon Web Services account.

To log data events for a specific Lambda function, specify the function ARN.

Note

Lambda function ARNs are exact. For example, if you specify a function ARN arn:aws:lambda:us-west-2:111111111111:function:helloworld , data events will only be logged for arn:aws:lambda:us-west-2:111111111111:function:helloworld . They will not be logged for arn:aws:lambda:us-west-2:111111111111:function:helloworld2 .

To log data events for all DynamoDB tables in your Amazon Web Services account, specify the prefix as arn:aws:dynamodb .

(string)

ExcludeManagementEventSources -> (list)

An optional list of service event sources from which you do not want management events to be logged on your trail. In this release, the list can be empty (disables the filter), or it can filter out Key Management Service or Amazon RDS Data API events by containing kms.amazonaws.com or rdsdata.amazonaws.com . By default, ExcludeManagementEventSources is empty, and KMS and Amazon RDS Data API events are logged to your trail.

(string)

AdvancedEventSelectors -> (list)

Specifies the advanced event selectors configured for your trail.

(structure)

Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record ﬁelds. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .

readOnly

eventSource

eventName

eventCategory

resources.type

resources.ARN

You cannot apply both event selectors and advanced event selectors to a trail.

Name -> (string)

An optional, descriptive name for an advanced event selector, such as “Log data events for only two S3 buckets”.

FieldSelectors -> (list)

Contains all selector statements in an advanced event selector.

(structure)

A single selector statement in an advanced event selector.

Field -> (string)

A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .

**readOnly ** - Optional. Can be set to Equals a value of true or false . A value of false logs both read and write events.

**eventSource ** - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .

**eventName ** - Can use any operator. You can use it to ﬁlter in or ﬁlter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this ﬁeld, separated by commas.

**eventCategory ** - This is required. It must be set to Equals , and the value must be Management or Data .

**resources.type ** - This ﬁeld is required. resources.type can only use the Equals operator, and the value can be one of the following: AWS::S3::Object , AWS::S3::AccessPoint , AWS::Lambda::Function , AWS::DynamoDB::Table , AWS::S3Outposts::Object , AWS::ManagedBlockchain::Node , AWS::S3ObjectLambda::AccessPoint , or AWS::EC2::Snapshot . You can have only one resources.type ﬁeld per selector. To log data events on more than one resource type, add another selector.

**resources.ARN ** - You can use any operator with resources.ARN, but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you’ve speciﬁed in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.

arn:<partition>:s3:::<bucket_name>/

arn:<partition>:s3:::<bucket_name>/<object_path>/

When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.

arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>

arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>

When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>

When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:dynamodb:<region>:<account_ID>:table:<table_name>

When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>

When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>

When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>

When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:

arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>

Equals -> (list)

An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.

(string)

StartsWith -> (list)

An operator that includes events that match the first few characters of the event record field specified as the value of Field .

(string)

EndsWith -> (list)

An operator that includes events that match the last few characters of the event record field specified as the value of Field .

(string)

NotEquals -> (list)

An operator that excludes events that match the exact value of the event record field specified as the value of Field .

(string)

NotStartsWith -> (list)

An operator that excludes events that match the first few characters of the event record field specified as the value of Field .

(string)

NotEndsWith -> (list)

An operator that excludes events that match the last few characters of the event record field specified as the value of Field .

(string)

Table of Contents

Feedback

User Guide

put-event-selectors¶

Description¶

Synopsis¶

Options¶

Examples¶

Output¶