revoke-security-group-ingress¶

Note

To specify multiple rules in a single command use the --ip-permissions option

Description¶

Removes the specified inbound (ingress) rules from a security group.

You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you specify (for example, ports) must match the existing rule’s values exactly. Each rule has a protocol, from and to ports, and source (CIDR range, security group, or prefix list). For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. If the security group rule has a description, you do not need to specify the description to revoke the rule.

[EC2-Classic, default VPC] If the values you specify do not match the existing rule’s values, no error is returned, and the output describes the security group rules that were not revoked.

Amazon Web Services recommends that you describe the security group to verify that the rules were removed.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

Synopsis¶

  revoke-security-group-ingress
[--group-id <value>]
[--group-name <value>]
[--ip-permissions <value>]
[--dry-run | --no-dry-run]
[--security-group-rule-ids <value>]
[--protocol <value>]
[--port <value>]
[--cidr <value>]
[--source-group <value>]
[--group-owner <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options¶

--group-id (string)

The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

--group-name (string)

[EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request.

--ip-permissions (list)

The sets of IP permissions. You can’t specify a source security group and a CIDR IP address range in the same set of permissions.

(structure)

Describes a set of permissions for a security group rule.

FromPort -> (integer)

The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

IpProtocol -> (string)

The IP protocol name (tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ).

[VPC only] Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.

IpRanges -> (list)

The IPv4 ranges.

(structure)

Describes an IPv4 range.

CidrIp -> (string)

The IPv4 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv4 address, use the /32 prefix length.

Description -> (string)

A description for the security group rule that references this IPv4 address range.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*

Ipv6Ranges -> (list)

[VPC only] The IPv6 ranges.

(structure)

[EC2-VPC only] Describes an IPv6 range.

CidrIpv6 -> (string)

The IPv6 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv6 address, use the /128 prefix length.

Description -> (string)

A description for the security group rule that references this IPv6 address range.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*

PrefixListIds -> (list)

[VPC only] The prefix list IDs.

(structure)

Describes a prefix list ID.

Description -> (string)

A description for the security group rule that references this prefix list ID.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

PrefixListId -> (string)

The ID of the prefix.

ToPort -> (integer)

The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.

UserIdGroupPairs -> (list)

The security group and Amazon Web Services account ID pairs.

(structure)

Describes a security group and Amazon Web Services account ID pair.

Description -> (string)

A description for the security group rule that references this user ID group pair.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

GroupId -> (string)

The ID of the security group.

GroupName -> (string)

The name of the security group. In a request, use this parameter for a security group in EC2-Classic or a default VPC only. For a security group in a nondefault VPC, use the security group ID.

For a referenced security group in another VPC, this value is not returned if the referenced security group is deleted.

PeeringStatus -> (string)

The status of a VPC peering connection, if applicable.

UserId -> (string)

The ID of an Amazon Web Services account.

For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.

[EC2-Classic] Required when adding or removing rules that reference a security group in another Amazon Web Services account.

VpcId -> (string)

The ID of the VPC for the referenced security group, if applicable.

VpcPeeringConnectionId -> (string)

The ID of the VPC peering connection, if applicable.

Shorthand Syntax:

FromPort=integer,IpProtocol=string,IpRanges=[{CidrIp=string,Description=string},{CidrIp=string,Description=string}],Ipv6Ranges=[{CidrIpv6=string,Description=string},{CidrIpv6=string,Description=string}],PrefixListIds=[{Description=string,PrefixListId=string},{Description=string,PrefixListId=string}],ToPort=integer,UserIdGroupPairs=[{Description=string,GroupId=string,GroupName=string,PeeringStatus=string,UserId=string,VpcId=string,VpcPeeringConnectionId=string},{Description=string,GroupId=string,GroupName=string,PeeringStatus=string,UserId=string,VpcId=string,VpcPeeringConnectionId=string}] ...

JSON Syntax:

[
  {
    "FromPort": integer,
    "IpProtocol": "string",
    "IpRanges": [
      {
        "CidrIp": "string",
        "Description": "string"
      }
      ...
    ],
    "Ipv6Ranges": [
      {
        "CidrIpv6": "string",
        "Description": "string"
      }
      ...
    ],
    "PrefixListIds": [
      {
        "Description": "string",
        "PrefixListId": "string"
      }
      ...
    ],
    "ToPort": integer,
    "UserIdGroupPairs": [
      {
        "Description": "string",
        "GroupId": "string",
        "GroupName": "string",
        "PeeringStatus": "string",
        "UserId": "string",
        "VpcId": "string",
        "VpcPeeringConnectionId": "string"
      }
      ...
    ]
  }
  ...
]

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--security-group-rule-ids (list)

The IDs of the security group rules.

(string)

Syntax:

"string" "string" ...

--protocol (string)

The IP protocol: tcp | udp | icmp

(VPC only) Use all to specify all protocols.

If this argument is provided without also providing the port argument, then it will be applied to all ports for the specified protocol.

--port (string)

For TCP or UDP: The range of ports to allow. A single integer or a range (min-max ).

For ICMP: A single integer or a range (type-code ) representing the ICMP type number and the ICMP code number respectively. A value of -1 indicates all ICMP codes for all ICMP types. A value of -1 just for type indicates all ICMP codes for the specified ICMP type.

--cidr (string)

The CIDR IP range.

--source-group (string)

The name or ID of the source security group.

--group-owner (string)

The AWS account ID that owns the source security group. Cannot be used when specifying a CIDR IP address.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples¶

Example 1: To remove a rule from a security group

The following revoke-security-group-ingress example removes TCP port 22 access for the 203.0.113.0/24 address range from the specified security group for a default VPC.

aws ec2 revoke-security-group-ingress \
    --group-name mySecurityGroup
    --protocol tcp \
    --port 22 \
    --cidr 203.0.113.0/24

This command produces no output if it succeeds.

For more information, see Security groups in the Amazon EC2 User Guide.

Example 2: To remove a rule using the IP permissions set

The following revoke-security-group-ingress example uses the ip-permissions parameter to remove an inbound rule that allows the ICMP message Destination Unreachable: Fragmentation Needed and Don't Fragment was Set (Type 3, Code 4).

aws ec2 revoke-security-group-ingress \
    --group-id sg-026c12253ce15eff7 \
    --ip-permissions IpProtocol=icmp,FromPort=3,ToPort=4,IpRanges=[{CidrIp=0.0.0.0/0}]

This command produces no output if it succeeds.

For more information, see Security groups in the Amazon EC2 User Guide.

Output¶

Return -> (boolean)

Returns true if the request succeeds; otherwise, returns an error.

UnknownIpPermissions -> (list)

The inbound rules that were unknown to the service. In some cases, unknownIpPermissionSet might be in a different format from the request parameter.

(structure)

Describes a set of permissions for a security group rule.

FromPort -> (integer)

The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

IpProtocol -> (string)

The IP protocol name (tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ).

[VPC only] Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.

IpRanges -> (list)

The IPv4 ranges.

(structure)

Describes an IPv4 range.

CidrIp -> (string)

The IPv4 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv4 address, use the /32 prefix length.

Description -> (string)

A description for the security group rule that references this IPv4 address range.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*

Ipv6Ranges -> (list)

[VPC only] The IPv6 ranges.

(structure)

[EC2-VPC only] Describes an IPv6 range.

CidrIpv6 -> (string)

The IPv6 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv6 address, use the /128 prefix length.

Description -> (string)

A description for the security group rule that references this IPv6 address range.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*

PrefixListIds -> (list)

[VPC only] The prefix list IDs.

(structure)

Describes a prefix list ID.

Description -> (string)

A description for the security group rule that references this prefix list ID.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

PrefixListId -> (string)

The ID of the prefix.

ToPort -> (integer)

The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.

UserIdGroupPairs -> (list)

The security group and Amazon Web Services account ID pairs.

(structure)

Describes a security group and Amazon Web Services account ID pair.

Description -> (string)

A description for the security group rule that references this user ID group pair.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

GroupId -> (string)

The ID of the security group.

GroupName -> (string)

The name of the security group. In a request, use this parameter for a security group in EC2-Classic or a default VPC only. For a security group in a nondefault VPC, use the security group ID.

For a referenced security group in another VPC, this value is not returned if the referenced security group is deleted.

PeeringStatus -> (string)

The status of a VPC peering connection, if applicable.

UserId -> (string)

The ID of an Amazon Web Services account.

For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned.

[EC2-Classic] Required when adding or removing rules that reference a security group in another Amazon Web Services account.

VpcId -> (string)

The ID of the VPC for the referenced security group, if applicable.

VpcPeeringConnectionId -> (string)

The ID of the VPC peering connection, if applicable.

Table of Contents

Feedback

User Guide