[ aws . kinesis-video-archived-media ]

get-hls-streaming-session-url

Description

Retrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents.

Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation.

An Amazon Kinesis video stream has the following requirements for providing data through HLS:

• The media must contain h.264 or h.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEG/ISO/HEVC (for h.265). Optionally, the codec ID of track 2 should be A_AAC .

• Data retention must be greater than 0.

• The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15 ). For information about adapting stream data to a given format, see NAL Adaptation Flags .

• The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7 ).

Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification .

The following procedure shows how to use HLS with Kinesis Video Streams:

• Get an endpoint using GetDataEndpoint , specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.

• Retrieve the HLS URL using GetHLSStreamingSessionURL . Kinesis Video Streams creates an HLS streaming session to be used for accessing content in a stream using the HLS protocol. GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session’s HLS master playlist (the root resource needed for streaming with HLS).

Note

Don’t share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.

The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.

• Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.

• The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:

  • GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including estimated bitrate and resolution.

  • GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4 initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about the stream that the player needs to play it, such as whether the PlaybackMode is LIVE or ON_DEMAND . The HLS media playlist is typically static for sessions with a PlaybackType of ON_DEMAND . The HLS media playlist is continually updated with new fragments for sessions with a PlaybackType of LIVE . There is a distinct HLS media playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific track.

  • GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the “fytp ” and “moov ” MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.

  • GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the “moof ” and “mdat ” MP4 atoms and their child atoms, containing the encoded fragment’s media frames and their timestamps.

  Note

  After the first media fragment is made available in a streaming session, any fragments that don’t contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.

  Data retrieved with this action is billable. See Pricing for details.

  • GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.

  Note

  If the ContainerFormat is MPEG_TS , this API is used instead of GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.

  Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing .

A streaming session URL must not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits .

You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams . For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing . Charges for both HLS sessions and outgoing AWS data apply.

For more information about HLS, see HTTP Live Streaming on the Apple Developer site .

Warning

If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:

• x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.

• x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.

Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.

For more information, see the Errors section at the bottom of this topic, as well as Common Errors .

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  get-hls-streaming-session-url
[--stream-name <value>]
[--stream-arn <value>]
[--playback-mode <value>]
[--hls-fragment-selector <value>]
[--container-format <value>]
[--discontinuity-mode <value>]
[--display-fragment-timestamp <value>]
[--expires <value>]
[--max-media-playlist-fragment-results <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--stream-name (string)

The name of the stream for which to retrieve the HLS master playlist URL.

You must specify either the StreamName or the StreamARN .

--stream-arn (string)

The Amazon Resource Name (ARN) of the stream for which to retrieve the HLS master playlist URL.

You must specify either the StreamName or the StreamARN .

--playback-mode (string)

Whether to retrieve live, live replay, or archived, on-demand data.

Features of the three types of sessions include the following:

• **LIVE ** : For sessions of this type, the HLS media playlist is continually updated with the latest fragments as they become available. We recommend that the media player retrieve a new playlist on a one-second interval. When this type of session is played in a media player, the user interface typically displays a “live” notification, with no scrubber control for choosing the position in the playback window to display.

Note

In LIVE mode, the newest available fragments are included in an HLS media playlist, even if there is a gap between fragments (that is, if a fragment is missing). A gap like this might cause a media player to halt or cause a jump in playback. In this mode, fragments are not added to the HLS media playlist if they are older than the newest fragment in the playlist. If the missing fragment becomes available after a subsequent fragment is added to the playlist, the older fragment is not added, and the gap is not filled.

• **LIVE_REPLAY ** : For sessions of this type, the HLS media playlist is updated similarly to how it is updated for LIVE mode except that it starts by including fragments from a given start time. Instead of fragments being added as they are ingested, fragments are added as the duration of the next fragment elapses. For example, if the fragments in the session are two seconds long, then a new fragment is added to the media playlist every two seconds. This mode is useful to be able to start playback from when an event is detected and continue live streaming media that has not yet been ingested as of the time of the session creation. This mode is also useful to stream previously archived media without being limited by the 1,000 fragment limit in the ON_DEMAND mode.

• **ON_DEMAND ** : For sessions of this type, the HLS media playlist contains all the fragments for the session, up to the number that is specified in MaxMediaPlaylistFragmentResults . The playlist must be retrieved only once for each session. When this type of session is played in a media player, the user interface typically displays a scrubber control for choosing the position in the playback window to display.

In all playback modes, if FragmentSelectorType is PRODUCER_TIMESTAMP , and if there are multiple fragments with the same start timestamp, the fragment that has the largest fragment number (that is, the newest fragment) is included in the HLS media playlist. The other fragments are not included. Fragments that have different timestamps but have overlapping durations are still included in the HLS media playlist. This can lead to unexpected behavior in the media player.

The default is LIVE .

Possible values:

• LIVE

• LIVE_REPLAY

• ON_DEMAND

--hls-fragment-selector (structure)

The time range of the requested fragment and the source of the timestamps.

This parameter is required if PlaybackMode is ON_DEMAND or LIVE_REPLAY . This parameter is optional if PlaybackMode is LIVE . If PlaybackMode is LIVE , the FragmentSelectorType can be set, but the TimestampRange should not be set. If PlaybackMode is ON_DEMAND or LIVE_REPLAY , both FragmentSelectorType and TimestampRange must be set.

FragmentSelectorType -> (string)

The source of the timestamps for the requested media.

When FragmentSelectorType is set to PRODUCER_TIMESTAMP and GetHLSStreamingSessionURLInput$PlaybackMode is ON_DEMAND or LIVE_REPLAY , the first fragment ingested with a producer timestamp within the specified FragmentSelector$TimestampRange is included in the media playlist. In addition, the fragments with producer timestamps within the TimestampRange ingested immediately following the first fragment (up to the GetHLSStreamingSessionURLInput$MaxMediaPlaylistFragmentResults value) are included.

Fragments that have duplicate producer timestamps are deduplicated. This means that if producers are producing a stream of fragments with producer timestamps that are approximately equal to the true clock time, the HLS media playlists will contain all of the fragments within the requested timestamp range. If some fragments are ingested within the same time range and very different points in time, only the oldest ingested collection of fragments are returned.

When FragmentSelectorType is set to PRODUCER_TIMESTAMP and GetHLSStreamingSessionURLInput$PlaybackMode is LIVE , the producer timestamps are used in the MP4 fragments and for deduplication. But the most recently ingested fragments based on server timestamps are included in the HLS media playlist. This means that even if fragments ingested in the past have producer timestamps with values now, they are not included in the HLS media playlist.

The default is SERVER_TIMESTAMP .

TimestampRange -> (structure)

The start and end of the timestamp range for the requested media.

This value should not be present if PlaybackType is LIVE .

StartTimestamp -> (timestamp)

The start of the timestamp range for the requested media.

If the HLSTimestampRange value is specified, the StartTimestamp value is required.

Only fragments that start exactly at or after StartTimestamp are included in the session. Fragments that start before StartTimestamp and continue past it aren’t included in the session. If FragmentSelectorType is SERVER_TIMESTAMP , the StartTimestamp must be later than the stream head.

EndTimestamp -> (timestamp)

The end of the timestamp range for the requested media. This value must be within 24 hours of the specified StartTimestamp , and it must be later than the StartTimestamp value.

If FragmentSelectorType for the request is SERVER_TIMESTAMP , this value must be in the past.

The EndTimestamp value is required for ON_DEMAND mode, but optional for LIVE_REPLAY mode. If the EndTimestamp is not set for LIVE_REPLAY mode then the session will continue to include newly ingested fragments until the session expires.

Note

This value is inclusive. The EndTimestamp is compared to the (starting) timestamp of the fragment. Fragments that start before the EndTimestamp value and continue past it are included in the session.

Shorthand Syntax:

FragmentSelectorType=string,TimestampRange={StartTimestamp=timestamp,EndTimestamp=timestamp}

JSON Syntax:

{
  "FragmentSelectorType": "PRODUCER_TIMESTAMP"|"SERVER_TIMESTAMP",
  "TimestampRange": {
    "StartTimestamp": timestamp,
    "EndTimestamp": timestamp
  }
}

--container-format (string)

Specifies which format should be used for packaging the media. Specifying the FRAGMENTED_MP4 container format packages the media into MP4 fragments (fMP4 or CMAF). This is the recommended packaging because there is minimal packaging overhead. The other container format option is MPEG_TS . HLS has supported MPEG TS chunks since it was released and is sometimes the only supported packaging on older HLS players. MPEG TS typically has a 5-25 percent packaging overhead. This means MPEG TS typically requires 5-25 percent more bandwidth and cost than fMP4.

The default is FRAGMENTED_MP4 .

Possible values:

• FRAGMENTED_MP4

• MPEG_TS

--discontinuity-mode (string)

Specifies when flags marking discontinuities between fragments are added to the media playlists.

Media players typically build a timeline of media content to play, based on the timestamps of each fragment. This means that if there is any overlap or gap between fragments (as is typical if HLSFragmentSelector is set to SERVER_TIMESTAMP ), the media player timeline will also have small gaps between fragments in some places, and will overwrite frames in other places. Gaps in the media player timeline can cause playback to stall and overlaps can cause playback to be jittery. When there are discontinuity flags between fragments, the media player is expected to reset the timeline, resulting in the next fragment being played immediately after the previous fragment.

The following modes are supported:

• ALWAYS : a discontinuity marker is placed between every fragment in the HLS media playlist. It is recommended to use a value of ALWAYS if the fragment timestamps are not accurate.

• NEVER : no discontinuity markers are placed anywhere. It is recommended to use a value of NEVER to ensure the media player timeline most accurately maps to the producer timestamps.

• ON_DISCONTINUITY : a discontinuity marker is placed between fragments that have a gap or overlap of more than 50 milliseconds. For most playback scenarios, it is recommended to use a value of ON_DISCONTINUITY so that the media player timeline is only reset when there is a significant issue with the media timeline (e.g. a missing fragment).

The default is ALWAYS when HLSFragmentSelector is set to SERVER_TIMESTAMP , and NEVER when it is set to PRODUCER_TIMESTAMP .

Possible values:

• ALWAYS

• NEVER

• ON_DISCONTINUITY

--display-fragment-timestamp (string)

Specifies when the fragment start timestamps should be included in the HLS media playlist. Typically, media players report the playhead position as a time relative to the start of the first fragment in the playback session. However, when the start timestamps are included in the HLS media playlist, some media players might report the current playhead as an absolute time based on the fragment timestamps. This can be useful for creating a playback experience that shows viewers the wall-clock time of the media.

The default is NEVER . When HLSFragmentSelector is SERVER_TIMESTAMP , the timestamps will be the server start timestamps. Similarly, when HLSFragmentSelector is PRODUCER_TIMESTAMP , the timestamps will be the producer start timestamps.

Possible values:

• ALWAYS

• NEVER

--expires (integer)

The time in seconds until the requested session expires. This value can be between 300 (5 minutes) and 43200 (12 hours).

When a session expires, no new calls to GetHLSMasterPlaylist , GetHLSMediaPlaylist , GetMP4InitFragment , GetMP4MediaFragment , or GetTSFragment can be made for that session.

The default is 300 (5 minutes).

--max-media-playlist-fragment-results (long)

The maximum number of fragments that are returned in the HLS media playlists.

When the PlaybackMode is LIVE , the most recent fragments are returned up to this value. When the PlaybackMode is ON_DEMAND , the oldest fragments are returned, up to this maximum number.

When there are a higher number of fragments available in a live HLS media playlist, video players often buffer content before starting playback. Increasing the buffer size increases the playback latency, but it decreases the likelihood that rebuffering will occur during playback. We recommend that a live HLS media playlist have a minimum of 3 fragments and a maximum of 10 fragments.

The default is 5 fragments if PlaybackMode is LIVE or LIVE_REPLAY , and 1,000 if PlaybackMode is ON_DEMAND .

The maximum value of 5,000 fragments corresponds to more than 80 minutes of video on streams with 1-second fragments, and more than 13 hours of video on streams with 10-second fragments.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Output

HLSStreamingSessionURL -> (string)

The URL (containing the session token) that a media player can use to retrieve the HLS master playlist.