[ aws . sqs ]

get-queue-attributes

Description

Gets attributes for the specified queue.

Note

To determine whether a queue is FIFO , you can check whether QueueName ends with the .fifo suffix.

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  get-queue-attributes
--queue-url <value>
[--attribute-names <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--queue-url (string)

The URL of the Amazon SQS queue whose attribute information is retrieved.

Queue URLs and names are case-sensitive.

--attribute-names (list)

A list of attributes for which to retrieve information.

The AttributeName.N parameter is optional, but if you don’t specify values for this parameter, the request returns empty results.

Note

In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

The following attributes are supported:

Warning

The ApproximateNumberOfMessagesDelayed , ApproximateNumberOfMessagesNotVisible , and ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.

  • All – Returns all values.

  • ApproximateNumberOfMessages – Returns the approximate number of messages available for retrieval from the queue.

  • ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.

  • ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that are in flight. Messages are considered to be in flight if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.

  • CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time ).

  • DelaySeconds – Returns the default delay on the queue in seconds.

  • LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time ).

  • MaximumMessageSize – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.

  • MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS retains a message.

  • Policy – Returns the policy of the queue.

  • QueueArn – Returns the Amazon resource name (ARN) of the queue.

  • ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the ReceiveMessage action waits for a message to arrive.

  • VisibilityTimeout – Returns the visibility timeout for the queue. For more information about the visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide .

The following attributes apply only to dead-letter queues:

  • RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:

    • deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.

    • maxReceiveCount – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.

  • RedriveAllowPolicy – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:

    • redrivePermission – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:

      • allowAll – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.

      • denyAll – No source queues can specify this queue as the dead-letter queue.

      • byQueue – Only queues specified by the sourceQueueArns parameter can specify this queue as the dead-letter queue.

    • sourceQueueArns – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the redrivePermission parameter is set to byQueue . You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the redrivePermission parameter to allowAll .

Note

The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.

The following attributes apply only to server-side-encryption :

  • KmsMasterKeyId – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms .

  • KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see How Does the Data Key Reuse Period Work? .

The following attributes apply only to FIFO (first-in-first-out) queues :

  • FifoQueue – Returns information about whether the queue is FIFO. For more information, see FIFO queue logic in the Amazon SQS Developer Guide .

Note

To determine whether a queue is FIFO , you can check whether QueueName ends with the .fifo suffix.

  • ContentBasedDeduplication – Returns whether content-based deduplication is enabled for the queue. For more information, see Exactly-once processing in the Amazon SQS Developer Guide .

The following attributes apply only to high throughput for FIFO queues :

  • DeduplicationScope – Specifies whether message deduplication occurs at the message group or queue level. Valid values are messageGroup and queue .

  • FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are perQueue and perMessageGroupId . The perMessageGroupId value is allowed only when the value for DeduplicationScope is messageGroup .

To enable high throughput for FIFO queues, do the following:

  • Set DeduplicationScope to messageGroup .

  • Set FifoThroughputLimit to perMessageGroupId .

If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.

For information on throughput quotas, see Quotas related to messages in the Amazon SQS Developer Guide .

(string)

Syntax:

"string" "string" ...

Where valid values are:
  All
  Policy
  VisibilityTimeout
  MaximumMessageSize
  MessageRetentionPeriod
  ApproximateNumberOfMessages
  ApproximateNumberOfMessagesNotVisible
  CreatedTimestamp
  LastModifiedTimestamp
  QueueArn
  ApproximateNumberOfMessagesDelayed
  DelaySeconds
  ReceiveMessageWaitTimeSeconds
  RedrivePolicy
  FifoQueue
  ContentBasedDeduplication
  KmsMasterKeyId
  KmsDataKeyReusePeriodSeconds
  DeduplicationScope
  FifoThroughputLimit
  RedriveAllowPolicy

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples

To get a queue’s attributes

This example gets all of the specified queue’s attributes.

Command:

aws sqs get-queue-attributes --queue-url https://sqs.us-east-1.amazonaws.com/80398EXAMPLE/MyQueue --attribute-names All

Output:

{
  "Attributes": {
    "ApproximateNumberOfMessagesNotVisible": "0",
    "RedrivePolicy": "{\"deadLetterTargetArn\":\"arn:aws:sqs:us-east-1:80398EXAMPLE:MyDeadLetterQueue\",\"maxReceiveCount\":1000}",
    "MessageRetentionPeriod": "345600",
    "ApproximateNumberOfMessagesDelayed": "0",
    "MaximumMessageSize": "262144",
    "CreatedTimestamp": "1442426968",
    "ApproximateNumberOfMessages": "0",
    "ReceiveMessageWaitTimeSeconds": "0",
    "DelaySeconds": "0",
    "VisibilityTimeout": "30",
    "LastModifiedTimestamp": "1442426968",
    "QueueArn": "arn:aws:sqs:us-east-1:80398EXAMPLE:MyNewQueue"
  }
}

This example gets only the specified queue’s maximum message size and visibility timeout attributes.

Command:

aws sqs get-queue-attributes --queue-url https://sqs.us-east-1.amazonaws.com/80398EXAMPLE/MyNewQueue --attribute-names MaximumMessageSize VisibilityTimeout

Output:

{
  "Attributes": {
    "VisibilityTimeout": "30",
    "MaximumMessageSize": "262144"
  }
}

Output

Attributes -> (map)

A map of attributes to their respective values.

Name -> (string)

Value -> (string)