[ aws . directconnect ]

delete-lag

Description

Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  delete-lag
--lag-id <value>
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--lag-id (string)

The ID of the LAG.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples

To delete a LAG

The following example deletes the specified LAG.

Command:

aws directconnect delete-lag --lag-id dxlag-ffrhowd9

Output:

{
  "awsDevice": "EqDC2-4h6ce2r1bes6",
  "numberOfConnections": 0,
  "lagState": "deleted",
  "ownerAccount": "123456789012",
  "lagName": "TestLAG",
  "connections": [],
  "lagId": "dxlag-ffrhowd9",
  "minimumLinks": 0,
  "connectionsBandwidth": "1Gbps",
  "region": "us-east-1",
  "location": "EqDC2"
}

Output

connectionsBandwidth -> (string)

The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

numberOfConnections -> (integer)

The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.

lagId -> (string)

The ID of the LAG.

ownerAccount -> (string)

The ID of the Amazon Web Services account that owns the LAG.

lagName -> (string)

The name of the LAG.

lagState -> (string)

The state of the LAG. The following are the possible values:

• requested : The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.

• pending : The LAG has been approved and is being initialized.

• available : The network link is established and the LAG is ready for use.

• down : The network link is down.

• deleting : The LAG is being deleted.

• deleted : The LAG is deleted.

• unknown : The state of the LAG is not available.

location -> (string)

The location of the LAG.

region -> (string)

The Amazon Web Services Region where the connection is located.

minimumLinks -> (integer)

The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.

awsDevice -> (string)

The Direct Connect endpoint that hosts the LAG.

awsDeviceV2 -> (string)

The Direct Connect endpoint that hosts the LAG.

awsLogicalDeviceId -> (string)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connections -> (list)

The connections bundled by the LAG.

(structure)

Information about an Direct Connect connection.

ownerAccount -> (string)

The ID of the Amazon Web Services account that owns the connection.

connectionId -> (string)

The ID of the connection.

connectionName -> (string)

The name of the connection.

connectionState -> (string)

The state of the connection. The following are the possible values:

• ordering : The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested : The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending : The connection has been approved and is being initialized.

• available : The network link is up and the connection is ready for use.

• down : The network link is down.

• deleting : The connection is being deleted.

• deleted : The connection has been deleted.

• rejected : A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown : The state of the connection is not available.

region -> (string)

The Amazon Web Services Region where the connection is located.

location -> (string)

The location of the connection.

bandwidth -> (string)

The bandwidth of the connection.

vlan -> (integer)

The ID of the VLAN.

partnerName -> (string)

The name of the Direct Connect service provider associated with the connection.

loaIssueTime -> (timestamp)

The time of the most recent call to DescribeLoa for this connection.

lagId -> (string)

The ID of the LAG.

awsDevice -> (string)

The Direct Connect endpoint on which the physical connection terminates.

jumboFrameCapable -> (boolean)

Indicates whether jumbo frames (9001 MTU) are supported.

awsDeviceV2 -> (string)

The Direct Connect endpoint that terminates the physical connection.

awsLogicalDeviceId -> (string)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

hasLogicalRedundancy -> (string)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

tags -> (list)

The tags associated with the connection.

(structure)

Information about a tag.

key -> (string)

The key.

value -> (string)

The value.

providerName -> (string)

The name of the service provider associated with the connection.

macSecCapable -> (boolean)

Indicates whether the connection supports MAC Security (MACsec).

portEncryptionStatus -> (string)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up , which means that there is an active Connection Key Name, or Encryption Down .

encryptionMode -> (string)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt , should_encrypt , and must_encrypt .

macSecKeys -> (list)

The MAC Security (MACsec) security keys associated with the connection.

(structure)

Information about the MAC Security (MACsec) secret key.

secretARN -> (string)

The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.

ckn -> (string)

The Connection Key Name (CKN) for the MAC Security secret key.

state -> (string)

The state of the MAC Security (MACsec) secret key.

The possible values are:

• associating : The MAC Security (MACsec) secret key is being validated and not yet associated with the connection or LAG.

• associated : The MAC Security (MACsec) secret key is validated and associated with the connection or LAG.

• disassociating : The MAC Security (MACsec) secret key is being disassociated from the connection or LAG

• disassociated : The MAC Security (MACsec) secret key is no longer associated with the connection or LAG.

startOn -> (string)

The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.

allowsHostedConnections -> (boolean)

Indicates whether the LAG can host other connections.

jumboFrameCapable -> (boolean)

Indicates whether jumbo frames (9001 MTU) are supported.

hasLogicalRedundancy -> (string)

Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).

tags -> (list)

The tags associated with the LAG.

(structure)

Information about a tag.

key -> (string)

The key.

value -> (string)

The value.

providerName -> (string)

The name of the service provider associated with the LAG.

macSecCapable -> (boolean)

Indicates whether the LAG supports MAC Security (MACsec).

encryptionMode -> (string)

The LAG MAC Security (MACsec) encryption mode.

The valid values are no_encrypt , should_encrypt , and must_encrypt .

macSecKeys -> (list)

The MAC Security (MACsec) security keys associated with the LAG.

(structure)

Information about the MAC Security (MACsec) secret key.

secretARN -> (string)

The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.

ckn -> (string)

The Connection Key Name (CKN) for the MAC Security secret key.

state -> (string)

The state of the MAC Security (MACsec) secret key.

The possible values are:

• associating : The MAC Security (MACsec) secret key is being validated and not yet associated with the connection or LAG.

• associated : The MAC Security (MACsec) secret key is validated and associated with the connection or LAG.

• disassociating : The MAC Security (MACsec) secret key is being disassociated from the connection or LAG

• disassociated : The MAC Security (MACsec) secret key is no longer associated with the connection or LAG.

startOn -> (string)

The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.