[ aws . ec2 ]

modify-vpn-tunnel-options

Description

Modifies the options for a VPN tunnel in an Amazon Web Services Site-to-Site VPN connection. You can modify multiple options for a tunnel in a single request, but you can only modify one tunnel at a time. For more information, see Site-to-Site VPN tunnel options for your Site-to-Site VPN connection in the Amazon Web Services Site-to-Site VPN User Guide .

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  modify-vpn-tunnel-options
--vpn-connection-id <value>
--vpn-tunnel-outside-ip-address <value>
--tunnel-options <value>
[--dry-run | --no-dry-run]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--vpn-connection-id (string)

The ID of the Amazon Web Services Site-to-Site VPN connection.

--vpn-tunnel-outside-ip-address (string)

The external IP address of the VPN tunnel.

--tunnel-options (structure)

The tunnel options to modify.

TunnelInsideCidr -> (string)

The range of inside IPv4 addresses for the tunnel. Any specified CIDR blocks must be unique across all VPN connections that use the same virtual private gateway.

Constraints: A size /30 CIDR block from the 169.254.0.0/16 range. The following CIDR blocks are reserved and cannot be used:

• 169.254.0.0/30

• 169.254.1.0/30

• 169.254.2.0/30

• 169.254.3.0/30

• 169.254.4.0/30

• 169.254.5.0/30

• 169.254.169.252/30

TunnelInsideIpv6Cidr -> (string)

The range of inside IPv6 addresses for the tunnel. Any specified CIDR blocks must be unique across all VPN connections that use the same transit gateway.

Constraints: A size /126 CIDR block from the local fd00::/8 range.

PreSharedKey -> (string)

The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway.

Constraints: Allowed characters are alphanumeric characters, periods (.), and underscores (_). Must be between 8 and 64 characters in length and cannot start with zero (0).

Phase1LifetimeSeconds -> (integer)

The lifetime for phase 1 of the IKE negotiation, in seconds.

Constraints: A value between 900 and 28,800.

Default: 28800

Phase2LifetimeSeconds -> (integer)

The lifetime for phase 2 of the IKE negotiation, in seconds.

Constraints: A value between 900 and 3,600. The value must be less than the value for Phase1LifetimeSeconds .

Default: 3600

RekeyMarginTimeSeconds -> (integer)

The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey. The exact time of the rekey is randomly selected based on the value for RekeyFuzzPercentage .

Constraints: A value between 60 and half of Phase2LifetimeSeconds .

Default: 540

RekeyFuzzPercentage -> (integer)

The percentage of the rekey window (determined by RekeyMarginTimeSeconds ) during which the rekey time is randomly selected.

Constraints: A value between 0 and 100.

Default: 100

ReplayWindowSize -> (integer)

The number of packets in an IKE replay window.

Constraints: A value between 64 and 2048.

Default: 1024

DPDTimeoutSeconds -> (integer)

The number of seconds after which a DPD timeout occurs.

Constraints: A value greater than or equal to 30.

Default: 30

DPDTimeoutAction -> (string)

The action to take after DPD timeout occurs. Specify restart to restart the IKE initiation. Specify clear to end the IKE session.

Valid Values: clear | none | restart

Default: clear

Phase1EncryptionAlgorithms -> (list)

One or more encryption algorithms that are permitted for the VPN tunnel for phase 1 IKE negotiations.

Valid values: AES128 | AES256 | AES128-GCM-16 | AES256-GCM-16

(structure)

Specifies the encryption algorithm for the VPN tunnel for phase 1 IKE negotiations.

Value -> (string)

The value for the encryption algorithm.

Phase2EncryptionAlgorithms -> (list)

One or more encryption algorithms that are permitted for the VPN tunnel for phase 2 IKE negotiations.

Valid values: AES128 | AES256 | AES128-GCM-16 | AES256-GCM-16

(structure)

Specifies the encryption algorithm for the VPN tunnel for phase 2 IKE negotiations.

Value -> (string)

The encryption algorithm.

Phase1IntegrityAlgorithms -> (list)

One or more integrity algorithms that are permitted for the VPN tunnel for phase 1 IKE negotiations.

Valid values: SHA1 | SHA2-256 | SHA2-384 | SHA2-512

(structure)

Specifies the integrity algorithm for the VPN tunnel for phase 1 IKE negotiations.

Value -> (string)

The value for the integrity algorithm.

Phase2IntegrityAlgorithms -> (list)

One or more integrity algorithms that are permitted for the VPN tunnel for phase 2 IKE negotiations.

Valid values: SHA1 | SHA2-256 | SHA2-384 | SHA2-512

(structure)

Specifies the integrity algorithm for the VPN tunnel for phase 2 IKE negotiations.

Value -> (string)

The integrity algorithm.

Phase1DHGroupNumbers -> (list)

One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel for phase 1 IKE negotiations.

Valid values: 2 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24

(structure)

Specifies a Diffie-Hellman group number for the VPN tunnel for phase 1 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

Phase2DHGroupNumbers -> (list)

One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel for phase 2 IKE negotiations.

Valid values: 2 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24

(structure)

Specifies a Diffie-Hellman group number for the VPN tunnel for phase 2 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

IKEVersions -> (list)

The IKE versions that are permitted for the VPN tunnel.

Valid values: ikev1 | ikev2

(structure)

The IKE version that is permitted for the VPN tunnel.

Value -> (string)

The IKE version.

StartupAction -> (string)

The action to take when the establishing the tunnel for the VPN connection. By default, your customer gateway device must initiate the IKE negotiation and bring up the tunnel. Specify start for Amazon Web Services to initiate the IKE negotiation.

Valid Values: add | start

Default: add

Shorthand Syntax:

TunnelInsideCidr=string,TunnelInsideIpv6Cidr=string,PreSharedKey=string,Phase1LifetimeSeconds=integer,Phase2LifetimeSeconds=integer,RekeyMarginTimeSeconds=integer,RekeyFuzzPercentage=integer,ReplayWindowSize=integer,DPDTimeoutSeconds=integer,DPDTimeoutAction=string,Phase1EncryptionAlgorithms=[{Value=string},{Value=string}],Phase2EncryptionAlgorithms=[{Value=string},{Value=string}],Phase1IntegrityAlgorithms=[{Value=string},{Value=string}],Phase2IntegrityAlgorithms=[{Value=string},{Value=string}],Phase1DHGroupNumbers=[{Value=integer},{Value=integer}],Phase2DHGroupNumbers=[{Value=integer},{Value=integer}],IKEVersions=[{Value=string},{Value=string}],StartupAction=string

JSON Syntax:

{
  "TunnelInsideCidr": "string",
  "TunnelInsideIpv6Cidr": "string",
  "PreSharedKey": "string",
  "Phase1LifetimeSeconds": integer,
  "Phase2LifetimeSeconds": integer,
  "RekeyMarginTimeSeconds": integer,
  "RekeyFuzzPercentage": integer,
  "ReplayWindowSize": integer,
  "DPDTimeoutSeconds": integer,
  "DPDTimeoutAction": "string",
  "Phase1EncryptionAlgorithms": [
    {
      "Value": "string"
    }
    ...
  ],
  "Phase2EncryptionAlgorithms": [
    {
      "Value": "string"
    }
    ...
  ],
  "Phase1IntegrityAlgorithms": [
    {
      "Value": "string"
    }
    ...
  ],
  "Phase2IntegrityAlgorithms": [
    {
      "Value": "string"
    }
    ...
  ],
  "Phase1DHGroupNumbers": [
    {
      "Value": integer
    }
    ...
  ],
  "Phase2DHGroupNumbers": [
    {
      "Value": integer
    }
    ...
  ],
  "IKEVersions": [
    {
      "Value": "string"
    }
    ...
  ],
  "StartupAction": "string"
}

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples

To modify the tunnel options for a VPN connection

The following modify-vpn-tunnel-options example updates the Diffie-Hellmann groups that are permitted for the specified tunnel and VPN connection.

aws ec2 modify-vpn-tunnel-options \
    --vpn-connection-id vpn-12345678901234567 \
    --vpn-tunnel-outside-ip-address 203.0.113.17 \
    --tunnel-options Phase1DHGroupNumbers=[{Value=14},{Value=15},{Value=16},{Value=17},{Value=18}],Phase2DHGroupNumbers=[{Value=14},{Value=15},{Value=16},{Value=17},{Value=18}]

Output:

{
    "VpnConnection": {
        "CustomerGatewayConfiguration": "...configuration information...",
        "CustomerGatewayId": "cgw-aabbccddee1122334",
        "Category": "VPN",
        "State": "available",
        "Type": "ipsec.1",
        "VpnConnectionId": "vpn-12345678901234567",
        "VpnGatewayId": "vgw-11223344556677889",
        "Options": {
            "StaticRoutesOnly": false,
            "TunnelOptions": [
                {
                    "OutsideIpAddress": "203.0.113.17",
                    "Phase1DHGroupNumbers": [
                        {
                            "Value": 14
                        },
                        {
                            "Value": 15
                        },
                        {
                            "Value": 16
                        },
                        {
                            "Value": 17
                        },
                        {
                            "Value": 18
                        }
                    ],
                    "Phase2DHGroupNumbers": [
                        {
                            "Value": 14
                        },
                        {
                            "Value": 15
                        },
                        {
                            "Value": 16
                        },
                        {
                            "Value": 17
                        },
                        {
                            "Value": 18
                        }
                    ]
                },
                {
                    "OutsideIpAddress": "203.0.114.19"
                }
            ]
        },
        "VgwTelemetry": [
            {
                "AcceptedRouteCount": 0,
                "LastStatusChange": "2019-09-10T21:56:54.000Z",
                "OutsideIpAddress": "203.0.113.17",
                "Status": "DOWN",
                "StatusMessage": "IPSEC IS DOWN"
            },
            {
                "AcceptedRouteCount": 0,
                "LastStatusChange": "2019-09-10T21:56:43.000Z",
                "OutsideIpAddress": "203.0.114.19",
                "Status": "DOWN",
                "StatusMessage": "IPSEC IS DOWN"
            }
        ]
    }
}

Output

VpnConnection -> (structure)

Describes a VPN connection.

CustomerGatewayConfiguration -> (string)

The configuration information for the VPN connection’s customer gateway (in the native XML format). This element is always present in the CreateVpnConnection response; however, it’s present in the DescribeVpnConnections response only if the VPN connection is in the pending or available state.

CustomerGatewayId -> (string)

The ID of the customer gateway at your end of the VPN connection.

Category -> (string)

The category of the VPN connection. A value of VPN indicates an Amazon Web Services VPN connection. A value of VPN-Classic indicates an Amazon Web Services Classic VPN connection.

State -> (string)

The current state of the VPN connection.

Type -> (string)

The type of VPN connection.

VpnConnectionId -> (string)

The ID of the VPN connection.

VpnGatewayId -> (string)

The ID of the virtual private gateway at the Amazon Web Services side of the VPN connection.

TransitGatewayId -> (string)

The ID of the transit gateway associated with the VPN connection.

CoreNetworkArn -> (string)

The ARN of the core network.

CoreNetworkAttachmentArn -> (string)

The ARN of the core network attachment.

GatewayAssociationState -> (string)

The current state of the gateway association.

Options -> (structure)

The VPN connection options.

EnableAcceleration -> (boolean)

Indicates whether acceleration is enabled for the VPN connection.

StaticRoutesOnly -> (boolean)

Indicates whether the VPN connection uses static routes only. Static routes must be used for devices that don’t support BGP.

LocalIpv4NetworkCidr -> (string)

The IPv4 CIDR on the customer gateway (on-premises) side of the VPN connection.

RemoteIpv4NetworkCidr -> (string)

The IPv4 CIDR on the Amazon Web Services side of the VPN connection.

LocalIpv6NetworkCidr -> (string)

The IPv6 CIDR on the customer gateway (on-premises) side of the VPN connection.

RemoteIpv6NetworkCidr -> (string)

The IPv6 CIDR on the Amazon Web Services side of the VPN connection.

TunnelInsideIpVersion -> (string)

Indicates whether the VPN tunnels process IPv4 or IPv6 traffic.

TunnelOptions -> (list)

Indicates the VPN tunnel options.

(structure)

The VPN tunnel options.

OutsideIpAddress -> (string)

The external IP address of the VPN tunnel.

TunnelInsideCidr -> (string)

The range of inside IPv4 addresses for the tunnel.

TunnelInsideIpv6Cidr -> (string)

The range of inside IPv6 addresses for the tunnel.

PreSharedKey -> (string)

The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway.

Phase1LifetimeSeconds -> (integer)

The lifetime for phase 1 of the IKE negotiation, in seconds.

Phase2LifetimeSeconds -> (integer)

The lifetime for phase 2 of the IKE negotiation, in seconds.

RekeyMarginTimeSeconds -> (integer)

The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.

RekeyFuzzPercentage -> (integer)

The percentage of the rekey window determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.

ReplayWindowSize -> (integer)

The number of packets in an IKE replay window.

DpdTimeoutSeconds -> (integer)

The number of seconds after which a DPD timeout occurs.

DpdTimeoutAction -> (string)

The action to take after a DPD timeout occurs.

Phase1EncryptionAlgorithms -> (list)

The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The encryption algorithm for phase 1 IKE negotiations.

Value -> (string)

The value for the encryption algorithm.

Phase2EncryptionAlgorithms -> (list)

The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The encryption algorithm for phase 2 IKE negotiations.

Value -> (string)

The encryption algorithm.

Phase1IntegrityAlgorithms -> (list)

The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The integrity algorithm for phase 1 IKE negotiations.

Value -> (string)

The value for the integrity algorithm.

Phase2IntegrityAlgorithms -> (list)

The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The integrity algorithm for phase 2 IKE negotiations.

Value -> (string)

The integrity algorithm.

Phase1DHGroupNumbers -> (list)

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The Diffie-Hellmann group number for phase 1 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

Phase2DHGroupNumbers -> (list)

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The Diffie-Hellmann group number for phase 2 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

IkeVersions -> (list)

The IKE versions that are permitted for the VPN tunnel.

(structure)

The internet key exchange (IKE) version permitted for the VPN tunnel.

Value -> (string)

The IKE version.

StartupAction -> (string)

The action to take when the establishing the VPN tunnels for a VPN connection.

Routes -> (list)

The static routes associated with the VPN connection.

(structure)

Describes a static route for a VPN connection.

DestinationCidrBlock -> (string)

The CIDR block associated with the local subnet of the customer data center.

Source -> (string)

Indicates how the routes were provided.

State -> (string)

The current state of the static route.

Tags -> (list)

Any tags assigned to the VPN connection.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

VgwTelemetry -> (list)

Information about the VPN tunnel.

(structure)

Describes telemetry for a VPN tunnel.

AcceptedRouteCount -> (integer)

The number of accepted routes.

LastStatusChange -> (timestamp)

The date and time of the last change in status.

OutsideIpAddress -> (string)

The Internet-routable IP address of the virtual private gateway’s outside interface.

Status -> (string)

The status of the VPN tunnel.

StatusMessage -> (string)

If an error occurs, a description of the error.

CertificateArn -> (string)

The Amazon Resource Name (ARN) of the VPN tunnel endpoint certificate.