describe-tasks¶
Description¶
Describes a specified task or tasks.
Currently, stopped tasks appear in the returned results for at least one hour.
See also: AWS API Documentation
See ‘aws help’ for descriptions of global parameters.
Synopsis¶
describe-tasks
[--cluster <value>]
--tasks <value>
[--include <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
Options¶
--cluster (string)
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task or tasks to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the task or tasks you are describing were launched in any cluster other than the default cluster.
--tasks (list)
A list of up to 100 task IDs or full ARN entries.
(string)
Syntax:
"string" "string" ...
--include (list)
Specifies whether you want to see the resource tags for the task. If
TAGSis specified, the tags are included in the response. If this field is omitted, tags aren’t included in the response.(string)
Syntax:
"string" "string" ...
Where valid values are:
TAGS
--cli-input-json | --cli-input-yaml (string)
Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.
--generate-cli-skeleton (string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.
See ‘aws help’ for descriptions of global parameters.
Examples¶
Exampe 1: To describe a single task tasks
The following describe-tasks example retrieves the details of a task in a cluster. You can specify the task by using either the ID or full ARN of the task. This example uses the full ARN of the task.
aws ecs describe-tasks \
--cluster MyCluster \
--tasks arn:aws:ecs:us-east-1:123456789012:task/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE
Output:
{
"attachments": [
{
"id": "214eb5a9-45cd-4bf8-87bc-57fefEXAMPLE",
"type": "ElasticNetworkInterface",
"status": "ATTACHED",
"details": [
{
"name": "subnetId",
"value": "subnet-0d0eab1bb3EXAMPLE"
},
{
"name": "networkInterfaceId",
"value": "eni-064c7766daEXAMPLE"
},
{
"name": "macAddress",
"value": "0e:76:83:01:17:a9"
},
{
"name": "privateDnsName",
"value": "ip-10-0-1-41.ec2.internal"
},
{
"name": "privateIPv4Address",
"value": "10.0.1.41"
}
]
}
],
"attributes": [
{
"name": "ecs.cpu-architecture",
"value": "x86_64"
}
],
"availabilityZone": "us-east-1b",
"clusterArn": "arn:aws:ecs:us-east-1:123456789012:cluster/MyCluster",
"connectivity": "CONNECTED",
"connectivityAt": "2021-12-20T12:13:35.243000-05:00",
"containers": [
{
"containerArn": "arn:aws:ecs:us-east-1:123456789012:container/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE/9afef792-609b-43a5-bb6a-3efdbEXAMPLE",
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE",
"name": "web",
"image": "nginx",
"runtimeId": "d789e94343414c25b9f6bd59eEXAMPLE-265927825",
"lastStatus": "RUNNING",
"networkBindings": [],
"networkInterfaces": [
{
"attachmentId": "214eb5a9-45cd-4bf8-87bc-57fefEXAMPLE",
"privateIpv4Address": "10.0.1.41"
}
],
"healthStatus": "UNKNOWN",
"cpu": "99",
"memory": "100"
}
],
"cpu": "256",
"createdAt": "2021-12-20T12:13:20.226000-05:00",
"desiredStatus": "RUNNING",
"enableExecuteCommand": false,
"group": "service:tdsevicetag",
"healthStatus": "UNKNOWN",
"lastStatus": "RUNNING",
"launchType": "FARGATE",
"memory": "512",
"overrides": {
"containerOverrides": [
{
"name": "web"
}
],
"inferenceAcceleratorOverrides": []
},
"platformVersion": "1.4.0",
"platformFamily": "Linux",
"pullStartedAt": "2021-12-20T12:13:44.611000-05:00",
"pullStoppedAt": "2021-12-20T12:13:48.251000-05:00",
"startedAt": "2021-12-20T12:13:49.326000-05:00",
"startedBy": "ecs-svc/988401040018EXAMPLE",
"tags": [],
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE",
"taskDefinitionArn": "arn:aws:ecs:us-east-1:123456789012:task-definition/webserver:2",
"version": 3,
"ephemeralStorage": {
"sizeInGiB": 20
}
}
],
"failures": []
}
Exampe 2: To describe multiple tasks
The following describe-tasks example retrieves the details of multiple tasks in a cluster. You can specify the task by using either the ID or full ARN of the task. This example uses the full IDs of the tasks.
aws ecs describe-tasks \
--cluster MyCluster \
--tasks "74de0355a10a4f979ac495c14EXAMPLE" "d789e94343414c25b9f6bd59eEXAMPLE"
Output:
{
"tasks": [
{
"attachments": [
{
"id": "d9e7735a-16aa-4128-bc7a-b2d51EXAMPLE",
"type": "ElasticNetworkInterface",
"status": "ATTACHED",
"details": [
{
"name": "subnetId",
"value": "subnet-0d0eab1bb3EXAMPLE"
},
{
"name": "networkInterfaceId",
"value": "eni-0fa40520aeEXAMPLE"
},
{
"name": "macAddress",
"value": "0e:89:76:28:07:b3"
},
{
"name": "privateDnsName",
"value": "ip-10-0-1-184.ec2.internal"
},
{
"name": "privateIPv4Address",
"value": "10.0.1.184"
}
]
}
],
"attributes": [
{
"name": "ecs.cpu-architecture",
"value": "x86_64"
}
],
"availabilityZone": "us-east-1b",
"clusterArn": "arn:aws:ecs:us-east-1:123456789012:cluster/MyCluster",
"connectivity": "CONNECTED",
"connectivityAt": "2021-12-20T12:13:37.875000-05:00",
"containers": [
{
"containerArn": "arn:aws:ecs:us-east-1:123456789012:container/MyCluster/74de0355a10a4f979ac495c14EXAMPLE/aad3ba00-83b3-4dac-84d4-11f8cEXAMPLE",
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/74de0355a10a4f979ac495c14EXAMPLE",
"name": "web",
"image": "nginx",
"runtimeId": "74de0355a10a4f979ac495c14EXAMPLE-265927825",
"lastStatus": "RUNNING",
"networkBindings": [],
"networkInterfaces": [
{
"attachmentId": "d9e7735a-16aa-4128-bc7a-b2d51EXAMPLE",
"privateIpv4Address": "10.0.1.184"
}
],
"healthStatus": "UNKNOWN",
"cpu": "99",
"memory": "100"
}
],
"cpu": "256",
"createdAt": "2021-12-20T12:13:20.226000-05:00",
"desiredStatus": "RUNNING",
"enableExecuteCommand": false,
"group": "service:tdsevicetag",
"healthStatus": "UNKNOWN",
"lastStatus": "RUNNING",
"launchType": "FARGATE",
"memory": "512",
"overrides": {
"containerOverrides": [
{
"name": "web"
}
],
"inferenceAcceleratorOverrides": []
},
"platformVersion": "1.4.0",
"platformFamily": "Linux",
"pullStartedAt": "2021-12-20T12:13:42.665000-05:00",
"pullStoppedAt": "2021-12-20T12:13:46.543000-05:00",
"startedAt": "2021-12-20T12:13:48.086000-05:00",
"startedBy": "ecs-svc/988401040018EXAMPLE",
"tags": [],
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/74de0355a10a4f979ac495c14EXAMPLE",
"taskDefinitionArn": "arn:aws:ecs:us-east-1:123456789012:task-definition/webserver:2",
"version": 3,
"ephemeralStorage": {
"sizeInGiB": 20
}
},
{
"attachments": [
{
"id": "214eb5a9-45cd-4bf8-87bc-57fefEXAMPLE",
"type": "ElasticNetworkInterface",
"status": "ATTACHED",
"details": [
{
"name": "subnetId",
"value": "subnet-0d0eab1bb3EXAMPLE"
},
{
"name": "networkInterfaceId",
"value": "eni-064c7766daEXAMPLE"
},
{
"name": "macAddress",
"value": "0e:76:83:01:17:a9"
},
{
"name": "privateDnsName",
"value": "ip-10-0-1-41.ec2.internal"
},
{
"name": "privateIPv4Address",
"value": "10.0.1.41"
}
]
}
],
"attributes": [
{
"name": "ecs.cpu-architecture",
"value": "x86_64"
}
],
"availabilityZone": "us-east-1b",
"clusterArn": "arn:aws:ecs:us-east-1:123456789012:cluster/MyCluster",
"connectivity": "CONNECTED",
"connectivityAt": "2021-12-20T12:13:35.243000-05:00",
"containers": [
{
"containerArn": "arn:aws:ecs:us-east-1:123456789012:container/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE/9afef792-609b-43a5-bb6a-3efdbEXAMPLE",
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE",
"name": "web",
"image": "nginx",
"runtimeId": "d789e94343414c25b9f6bd59eEXAMPLE-265927825",
"lastStatus": "RUNNING",
"networkBindings": [],
"networkInterfaces": [
{
"attachmentId": "214eb5a9-45cd-4bf8-87bc-57fefEXAMPLE",
"privateIpv4Address": "10.0.1.41"
}
],
"healthStatus": "UNKNOWN",
"cpu": "99",
"memory": "100"
}
],
"cpu": "256",
"createdAt": "2021-12-20T12:13:20.226000-05:00",
"desiredStatus": "RUNNING",
"enableExecuteCommand": false,
"group": "service:tdsevicetag",
"healthStatus": "UNKNOWN",
"lastStatus": "RUNNING",
"launchType": "FARGATE",
"memory": "512",
"overrides": {
"containerOverrides": [
{
"name": "web"
}
],
"inferenceAcceleratorOverrides": []
},
"platformVersion": "1.4.0",
"platformFamily": "Linux",
"pullStartedAt": "2021-12-20T12:13:44.611000-05:00",
"pullStoppedAt": "2021-12-20T12:13:48.251000-05:00",
"startedAt": "2021-12-20T12:13:49.326000-05:00",
"startedBy": "ecs-svc/988401040018EXAMPLE",
"tags": [],
"taskArn": "arn:aws:ecs:us-east-1:123456789012:task/MyCluster/d789e94343414c25b9f6bd59eEXAMPLE",
"taskDefinitionArn": "arn:aws:ecs:us-east-1:123456789012:task-definition/webserver:2",
"version": 3,
"ephemeralStorage": {
"sizeInGiB": 20
}
}
],
"failures": []
}
For more information, see Amazon ECS Task Definitions in the Amazon ECS Developer Guide.
Output¶
tasks -> (list)
The list of tasks.
(structure)
Details on a task in a cluster.
attachments -> (list)
The Elastic Network Adapter that’s associated with the task if the task uses the
awsvpcnetwork mode.(structure)
An object representing a container instance or task attachment.
id -> (string)
The unique identifier for the attachment.
type -> (string)
The type of the attachment, such as
ElasticNetworkInterface.status -> (string)
The status of the attachment. Valid values are
PRECREATED,CREATED,ATTACHING,ATTACHED,DETACHING,DETACHED,DELETED, andFAILED.details -> (list)
Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
(structure)
A key-value pair object.
name -> (string)
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value -> (string)
The value of the key-value pair. For environment variables, this is the value of the environment variable.
attributes -> (list)
The attributes of the task
(structure)
An attribute is a name-value pair that’s associated with an Amazon ECS object. Use attributes to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide .
name -> (string)
The name of the attribute. The
namemust contain between 1 and 128 characters. The name may contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), forward slashes (/), back slashes (), or periods (.).value -> (string)
The value of the attribute. The
valuemust contain between 1 and 128 characters. It can contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), periods (.), at signs (@), forward slashes (/), back slashes (), colons (:), or spaces. The value can’t can’t start or end with a space.targetType -> (string)
The type of the target to attach the attribute with. This parameter is required if you use the short form ID for a resource instead of the full ARN.
targetId -> (string)
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
availabilityZone -> (string)
The Availability Zone for the task.
capacityProviderName -> (string)
The capacity provider that’s associated with the task.
clusterArn -> (string)
The ARN of the cluster that hosts the task.
connectivity -> (string)
The connectivity status of a task.
connectivityAt -> (timestamp)
The Unix timestamp for the time when the task last went into
CONNECTEDstatus.containerInstanceArn -> (string)
The ARN of the container instances that host the task.
containers -> (list)
The containers that’s associated with the task.
(structure)
A Docker container that’s part of a task.
containerArn -> (string)
The Amazon Resource Name (ARN) of the container.
taskArn -> (string)
The ARN of the task.
name -> (string)
The name of the container.
image -> (string)
The image used for the container.
imageDigest -> (string)
The container image manifest digest.
Note
The
imageDigestis only returned if the container is using an image hosted in Amazon ECR, otherwise it is omitted.runtimeId -> (string)
The ID of the Docker container.
lastStatus -> (string)
The last known status of the container.
exitCode -> (integer)
The exit code returned from the container.
reason -> (string)
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
networkBindings -> (list)
The network bindings associated with the container.
(structure)
Details on the network bindings between a container and its host container instance. After a task reaches the
RUNNINGstatus, manual and automatic host and container port assignments are visible in thenetworkBindingssection of DescribeTasks API responses.bindIP -> (string)
The IP address that the container is bound to on the container instance.
containerPort -> (integer)
The port number on the container that’s used with the network binding.
hostPort -> (integer)
The port number on the host that’s used with the network binding.
protocol -> (string)
The protocol used for the network binding.
networkInterfaces -> (list)
The network interfaces associated with the container.
(structure)
An object representing the elastic network interface for tasks that use the
awsvpcnetwork mode.attachmentId -> (string)
The attachment ID for the network interface.
privateIpv4Address -> (string)
The private IPv4 address for the network interface.
ipv6Address -> (string)
The private IPv6 address for the network interface.
healthStatus -> (string)
The health status of the container. If health checks aren’t configured for this container in its task definition, then it reports the health status as
UNKNOWN.managedAgents -> (list)
The details of any Amazon ECS managed agents associated with the container.
(structure)
Details about the managed agent status for the container.
lastStartedAt -> (timestamp)
The Unix timestamp for the time when the managed agent was last started.
name -> (string)
The name of the managed agent. When the execute command feature is enabled, the managed agent name is
ExecuteCommandAgent.reason -> (string)
The reason for why the managed agent is in the state it is in.
lastStatus -> (string)
The last known status of the managed agent.
cpu -> (string)
The number of CPU units set for the container. The value is
0if no value was specified in the container definition when the task definition was registered.memory -> (string)
The hard limit (in MiB) of memory set for the container.
memoryReservation -> (string)
The soft limit (in MiB) of memory set for the container.
gpuIds -> (list)
The IDs of each GPU assigned to the container.
(string)
cpu -> (string)
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units (for example,
1024). It can also be expressed as a string using vCPUs (for example,1 vCPUor1 vcpu). String values are converted to an integer that indicates the CPU units when the task definition is registered.If you use the EC2 launch type, this field is optional. Supported values are between
128CPU units (0.125vCPUs) and10240CPU units (10vCPUs).If you use the Fargate launch type, this field is required. You must use one of the following values. These values determine the range of supported values for the
memoryparameter:The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
256 (.25 vCPU) - Available
memoryvalues: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)512 (.5 vCPU) - Available
memoryvalues: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)1024 (1 vCPU) - Available
memoryvalues: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)2048 (2 vCPU) - Available
memoryvalues: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)4096 (4 vCPU) - Available
memoryvalues: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)createdAt -> (timestamp)
The Unix timestamp for the time when the task was created. More specifically, it’s for the time when the task entered the
PENDINGstate.desiredStatus -> (string)
The desired status of the task. For more information, see Task Lifecycle .
enableExecuteCommand -> (boolean)
Determines whether execute command functionality is enabled for this task. If
true, execute command functionality is enabled on all the containers in the task.executionStoppedAt -> (timestamp)
The Unix timestamp for the time when the task execution stopped.
group -> (string)
The name of the task group that’s associated with the task.
healthStatus -> (string)
The health status for the task. It’s determined by the health of the essential containers in the task. If all essential containers in the task are reporting as
HEALTHY, the task status also reports asHEALTHY. If any essential containers in the task are reporting asUNHEALTHYorUNKNOWN, the task status also reports asUNHEALTHYorUNKNOWN.Note
The Amazon ECS container agent doesn’t monitor or report on Docker health checks that are embedded in a container image and not specified in the container definition. For example, this includes those specified in a parent image or from the image’s Dockerfile. Health check parameters that are specified in a container definition override any Docker health checks that are found in the container image.
inferenceAccelerators -> (list)
The Elastic Inference accelerator that’s associated with the task.
(structure)
Details on an Elastic Inference accelerator. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide .
deviceName -> (string)
The Elastic Inference accelerator device name. The
deviceNamemust also be referenced in a container definition as a ResourceRequirement .deviceType -> (string)
The Elastic Inference accelerator type to use.
lastStatus -> (string)
The last known status for the task. For more information, see Task Lifecycle .
launchType -> (string)
The infrastructure where your task runs on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide .
memory -> (string)
The amount of memory (in MiB) that the task uses as expressed in a task definition. It can be expressed as an integer using MiB (for example,
1024). If it’s expressed as a string using GB (for example,1GBor1 GB), it’s converted to an integer indicating the MiB when the task definition is registered.If you use the EC2 launch type, this field is optional.
If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines the range of supported values for the
cpuparameter.
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available
cpuvalues: 256 (.25 vCPU)1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available
cpuvalues: 512 (.5 vCPU)2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available
cpuvalues: 1024 (1 vCPU)Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available
cpuvalues: 2048 (2 vCPU)Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available
cpuvalues: 4096 (4 vCPU)overrides -> (structure)
One or more container overrides.
containerOverrides -> (list)
One or more container overrides that are sent to a task.
(structure)
The overrides that are sent to a container. An empty container override can be passed in. An example of an empty container override is
{"containerOverrides": [ ] }. If a non-empty container override is specified, thenameparameter must be included.name -> (string)
The name of the container that receives the override. This parameter is required if any override is specified.
command -> (list)
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string)
environment -> (list)
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(structure)
A key-value pair object.
name -> (string)
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value -> (string)
The value of the key-value pair. For environment variables, this is the value of the environment variable.
environmentFiles -> (list)
A list of files containing the environment variables to pass to a container, instead of the value from the container definition.
(structure)
A list of files containing the environment variables to pass to a container. You can specify up to ten environment files. The file must have a
.envfile extension. Each line in an environment file should contain an environment variable inVARIABLE=VALUEformat. Lines beginning with#are treated as comments and are ignored. For more information about the environment variable file syntax, see Declare default environment variables in file .If there are environment variables specified using the
environmentparameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they’re processed from the top down. We recommend that you use unique variable names. For more information, see Specifying environment variables in the Amazon Elastic Container Service Developer Guide .This parameter is only supported for tasks hosted on Fargate using the following platform versions:
Linux platform version
1.4.0or later.Windows platform version
1.0.0or later.value -> (string)
The Amazon Resource Name (ARN) of the Amazon S3 object containing the environment variable file.
type -> (string)
The file type to use. The only supported value is
s3.cpu -> (integer)
The number of
cpuunits reserved for the container, instead of the default value from the task definition. You must also specify a container name.memory -> (integer)
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation -> (integer)
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements -> (list)
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(structure)
The type and amount of a resource to assign to a container. The supported resource types are GPUs and Elastic Inference accelerators. For more information, see Working with GPUs on Amazon ECS or Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value -> (string)
The value for the specified resource type.
If the
GPUtype is used, the value is the number of physicalGPUsthe Amazon ECS container agent reserves for the container. The number of GPUs that’s reserved for all containers in a task can’t exceed the number of available GPUs on the container instance that the task is launched on.If the
InferenceAcceleratortype is used, thevaluematches thedeviceNamefor an InferenceAccelerator specified in a task definition.type -> (string)
The type of resource to assign to a container. The supported values are
GPUorInferenceAccelerator.cpu -> (string)
The cpu override for the task.
inferenceAcceleratorOverrides -> (list)
The Elastic Inference accelerator override for the task.
(structure)
Details on an Elastic Inference accelerator task override. This parameter is used to override the Elastic Inference accelerator specified in the task definition. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide .
deviceName -> (string)
The Elastic Inference accelerator device name to override for the task. This parameter must match a
deviceNamespecified in the task definition.deviceType -> (string)
The Elastic Inference accelerator type to use.
executionRoleArn -> (string)
The Amazon Resource Name (ARN) of the task execution IAM role override for the task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide .
memory -> (string)
The memory override for the task.
taskRoleArn -> (string)
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Role for Tasks in the Amazon Elastic Container Service Developer Guide .
ephemeralStorage -> (structure)
The ephemeral storage setting override for the task.
Note
This parameter is only supported for tasks hosted on Fargate that use the following platform versions:
Linux platform version
1.4.0or later.Windows platform version
1.0.0or later.sizeInGiB -> (integer)
The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is
21GiB and the maximum supported value is200GiB.platformVersion -> (string)
The platform version where your task runs on. A platform version is only specified for tasks that use the Fargate launch type. If you didn’t specify one, the
LATESTplatform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .platformFamily -> (string)
The operating system that your tasks are running on. A platform family is specified only for tasks that use the Fargate launch type.
All tasks that run as part of this service must use the same
platformFamilyvalue as the service (for example,LINUX.).pullStartedAt -> (timestamp)
The Unix timestamp for the time when the container image pull began.
pullStoppedAt -> (timestamp)
The Unix timestamp for the time when the container image pull completed.
startedAt -> (timestamp)
The Unix timestamp for the time when the task started. More specifically, it’s for the time when the task transitioned from the
PENDINGstate to theRUNNINGstate.startedBy -> (string)
The tag specified when a task is started. If an Amazon ECS service started the task, the
startedByparameter contains the deployment ID of that service.stopCode -> (string)
The stop code indicating why a task was stopped. The
stoppedReasonmight contain additional details.The following are valid values:
TaskFailedToStart
EssentialContainerExited
UserInitiated
TerminationNotice
ServiceSchedulerInitiated
SpotInterruptionstoppedAt -> (timestamp)
The Unix timestamp for the time when the task was stopped. More specifically, it’s for the time when the task transitioned from the
RUNNINGstate to theSTOPPEDstate.stoppedReason -> (string)
The reason that the task was stopped.
stoppingAt -> (timestamp)
The Unix timestamp for the time when the task stops. More specifically, it’s for the time when the task transitions from the
RUNNINGstate toSTOPPED.tags -> (list)
The metadata that you apply to the task to help you categorize and organize the task. Each tag consists of a key and an optional value. You define both the key and value.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use
aws:,AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.(structure)
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use
aws:,AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.key -> (string)
One part of a key-value pair that make up a tag. A
keyis a general label that acts like a category for more specific tag values.value -> (string)
The optional part of a key-value pair that make up a tag. A
valueacts as a descriptor within a tag category (key).taskArn -> (string)
The Amazon Resource Name (ARN) of the task.
taskDefinitionArn -> (string)
The ARN of the task definition that creates the task.
version -> (long)
The version counter for the task. Every time a task experiences a change that starts a CloudWatch event, the version counter is incremented. If you replicate your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actions with the version reported in CloudWatch Events for the task (inside the
detailobject) to verify that the version in your event stream is current.ephemeralStorage -> (structure)
The ephemeral storage settings for the task.
sizeInGiB -> (integer)
The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is
21GiB and the maximum supported value is200GiB.
failures -> (list)
Any failures associated with the call.
(structure)
A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide .
arn -> (string)
The Amazon Resource Name (ARN) of the failed resource.
reason -> (string)
The reason for the failure.
detail -> (string)
The details of the failure.