AWS CLI Command Reference

[ aws . efs ]

create-mount-target

Description

Creates a mount target for a file system. You can then mount the file system on EC2 instances by using the mount target.

You can create one mount target in each Availability Zone in your VPC. All EC2 instances in a VPC within a given Availability Zone share a single mount target for a given file system. If you have multiple subnets in an Availability Zone, you create a mount target in one of the subnets. EC2 instances do not need to be in the same subnet as the mount target in order to access their file system.

You can create only one mount target for an EFS file system using One Zone storage classes. You must create that mount target in the same Availability Zone in which the file system is located. Use the AvailabilityZoneName and AvailabiltyZoneId properties in the DescribeFileSystems response object to get this information. Use the subnetId associated with the file system’s Availability Zone when creating the mount target.

For more information, see Amazon EFS: How it Works .

To create a mount target for a file system, the file system’s lifecycle state must be available . For more information, see DescribeFileSystems .

In the request, provide the following:

  • The file system ID for which you are creating the mount target.

  • A subnet ID, which determines the following:

    • The VPC in which Amazon EFS creates the mount target

    • The Availability Zone in which Amazon EFS creates the mount target

    • The IP address range from which Amazon EFS selects the IP address of the mount target (if you don’t specify an IP address in the request)

After creating the mount target, Amazon EFS returns a response that includes, a MountTargetId and an IpAddress . You use this IP address when mounting the file system in an EC2 instance. You can also use the mount target’s DNS name when mounting the file system. The EC2 instance on which you mount the file system by using the mount target can resolve the mount target’s DNS name to its IP address. For more information, see How it Works: Implementation Overview .

Note that you can create mount targets for a file system in only one VPC, and there can be only one mount target per Availability Zone. That is, if the file system already has one or more mount targets created for it, the subnet specified in the request to add another mount target must meet the following requirements:

  • Must belong to the same VPC as the subnets of the existing mount targets

  • Must not be in the same Availability Zone as any of the subnets of the existing mount targets

If the request satisfies the requirements, Amazon EFS does the following:

  • Creates a new mount target in the specified subnet.

  • Also creates a new network interface in the subnet as follows:

    • If the request provides an IpAddress , Amazon EFS assigns that IP address to the network interface. Otherwise, Amazon EFS assigns a free address in the subnet (in the same way that the Amazon EC2 CreateNetworkInterface call does when a request does not specify a primary private IP address).

    • If the request provides SecurityGroups , this network interface is associated with those security groups. Otherwise, it belongs to the default security group for the subnet’s VPC.

    • Assigns the description Mount target *fsmt-id* for file system *fs-id* `` where `` *fsmt-id* `` is the mount target ID, and `` *fs-id* `` is the ``FileSystemId .

    • Sets the requesterManaged property of the network interface to true , and the requesterId value to EFS .

Each Amazon EFS mount target has one corresponding requester-managed EC2 network interface. After the network interface is created, Amazon EFS sets the NetworkInterfaceId field in the mount target’s description to the network interface ID, and the IpAddress field to its address. If network interface creation fails, the entire CreateMountTarget operation fails.

Note

The CreateMountTarget call returns only after creating the network interface, but while the mount target state is still creating , you can check the mount target creation status by calling the DescribeMountTargets operation, which among other things returns the mount target state.

We recommend that you create a mount target in each of the Availability Zones. There are cost considerations for using a file system in an Availability Zone through a mount target created in another Availability Zone. For more information, see Amazon EFS . In addition, by always using a mount target local to the instance’s Availability Zone, you eliminate a partial failure scenario. If the Availability Zone in which your mount target is created goes down, then you can’t access your file system through that mount target.

This operation requires permissions for the following action on the file system:

  • elasticfilesystem:CreateMountTarget

This operation also requires permissions for the following Amazon EC2 actions:

  • ec2:DescribeSubnets

  • ec2:DescribeNetworkInterfaces

  • ec2:CreateNetworkInterface

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  create-mount-target
--file-system-id <value>
--subnet-id <value>
[--ip-address <value>]
[--security-groups <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--file-system-id (string)

The ID of the file system for which to create the mount target.

--subnet-id (string)

The ID of the subnet to add the mount target in. For file systems that use One Zone storage classes, use the subnet that is associated with the file system’s Availability Zone.

--ip-address (string)

Valid IPv4 address within the address range of the specified subnet.

--security-groups (list)

Up to five VPC security group IDs, of the form sg-xxxxxxxx . These must be for the same VPC as subnet specified.

(string)

Syntax:

"string" "string" ...

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See ‘aws help’ for descriptions of global parameters.

Examples

To create a mount target

The following create-mount-target example creates a mount target for the specified file system.

aws efs create-mount-target \
    --file-system-id fs-c7a0456e \
    --subnet-id subnet-02bf4c428bexample \
    --security-groups sg-068f739363example

Output:

{
    "OwnerId": "123456789012",
    "MountTargetId": "fsmt-f9a14450",
    "FileSystemId": "fs-c7a0456e",
    "SubnetId": "subnet-02bf4c428bexample",
    "LifeCycleState": "creating",
    "IpAddress": "10.0.1.24",
    "NetworkInterfaceId": "eni-02d542216aexample",
    "AvailabilityZoneId": "use2-az2",
    "AvailabilityZoneName": "us-east-2b",
    "VpcId": "vpc-0123456789abcdef0"
}

For more information, see Creating mount targets in the Amazon Elastic File System User Guide.

Output

OwnerId -> (string)

Amazon Web Services account ID that owns the resource.

MountTargetId -> (string)

System-assigned mount target ID.

FileSystemId -> (string)

The ID of the file system for which the mount target is intended.

SubnetId -> (string)

The ID of the mount target’s subnet.

LifeCycleState -> (string)

Lifecycle state of the mount target.

IpAddress -> (string)

Address at which the file system can be mounted by using the mount target.

NetworkInterfaceId -> (string)

The ID of the network interface that Amazon EFS created when it created the mount target.

AvailabilityZoneId -> (string)

The unique and consistent identifier of the Availability Zone that the mount target resides in. For example, use1-az1 is an AZ ID for the us-east-1 Region and it has the same location in every Amazon Web Services account.

AvailabilityZoneName -> (string)

The name of the Availability Zone in which the mount target is located. Availability Zones are independently mapped to names for each Amazon Web Services account. For example, the Availability Zone us-east-1a for your Amazon Web Services account might not be the same location as us-east-1a for another Amazon Web Services account.

VpcId -> (string)

The virtual private cloud (VPC) ID that the mount target is configured in.

© Copyright 2018, Amazon Web Services. Created using Sphinx.