AWS CLI Command Reference

[ aws . groundstation ]

update-config

Description

Updates the Config used when scheduling contacts.

Updating a Config will not update the execution parameters for existing future contacts scheduled with this Config .

See also: AWS API Documentation

See ‘aws help’ for descriptions of global parameters.

Synopsis

  update-config
--config-data <value>
--config-id <value>
--config-type <value>
--name <value>
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]

Options

--config-data (structure)

Parameters of a Config .

antennaDownlinkConfig -> (structure)

Information about how AWS Ground Station should configure an antenna for downlink during a contact.

spectrumConfig -> (structure)

Object that describes a spectral Config .

bandwidth -> (structure)

Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

units -> (string)

Frequency bandwidth units.

value -> (double)

Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

centerFrequency -> (structure)

Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

units -> (string)

Frequency units.

value -> (double)

Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

polarization -> (string)

Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

antennaDownlinkDemodDecodeConfig -> (structure)

Information about how AWS Ground Station should configure an antenna for downlink demod decode during a contact.

decodeConfig -> (structure)

Information about the decode Config .

unvalidatedJSON -> (string)

Unvalidated JSON of a decode Config .

demodulationConfig -> (structure)

Information about the demodulation Config .

unvalidatedJSON -> (string)

Unvalidated JSON of a demodulation Config .

spectrumConfig -> (structure)

Information about the spectral Config .

bandwidth -> (structure)

Bandwidth of a spectral Config . AWS Ground Station currently has the following bandwidth limitations:

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

units -> (string)

Frequency bandwidth units.

value -> (double)

Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

centerFrequency -> (structure)

Center frequency of a spectral Config . Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

units -> (string)

Frequency units.

value -> (double)

Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

polarization -> (string)

Polarization of a spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

antennaUplinkConfig -> (structure)

Information about how AWS Ground Station should configure an antenna for uplink during a contact.

spectrumConfig -> (structure)

Information about the uplink spectral Config .

centerFrequency -> (structure)

Center frequency of an uplink spectral Config . Valid values are between 2025 to 2120 MHz.

units -> (string)

Frequency units.

value -> (double)

Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

polarization -> (string)

Polarization of an uplink spectral Config . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

targetEirp -> (structure)

EIRP of the target.

units -> (string)

Units of an EIRP.

value -> (double)

Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.

transmitDisabled -> (boolean)

Whether or not uplink transmit is disabled.

dataflowEndpointConfig -> (structure)

Information about the dataflow endpoint Config .

dataflowEndpointName -> (string)

Name of a dataflow endpoint.

dataflowEndpointRegion -> (string)

Region of a dataflow endpoint.

s3RecordingConfig -> (structure)

Information about an S3 recording Config .

bucketArn -> (string)

ARN of the bucket to record to.

prefix -> (string)

S3 Key prefix to prefice data files.

roleArn -> (string)

ARN of the role Ground Station assumes to write data to the bucket.

trackingConfig -> (structure)

Object that determines whether tracking should be used during a contact executed with this Config in the mission profile.

autotrack -> (string)

Current setting for autotrack.

uplinkEchoConfig -> (structure)

Information about an uplink echo Config .

Parameters from the AntennaUplinkConfig , corresponding to the specified AntennaUplinkConfigArn , are used when this UplinkEchoConfig is used in a contact.

antennaUplinkConfigArn -> (string)

ARN of an uplink Config .

enabled -> (boolean)

Whether or not an uplink Config is enabled.

JSON Syntax:

{
  "antennaDownlinkConfig": {
    "spectrumConfig": {
      "bandwidth": {
        "units": "GHz"|"MHz"|"kHz",
        "value": double
      },
      "centerFrequency": {
        "units": "GHz"|"MHz"|"kHz",
        "value": double
      },
      "polarization": "LEFT_HAND"|"NONE"|"RIGHT_HAND"
    }
  },
  "antennaDownlinkDemodDecodeConfig": {
    "decodeConfig": {
      "unvalidatedJSON": "string"
    },
    "demodulationConfig": {
      "unvalidatedJSON": "string"
    },
    "spectrumConfig": {
      "bandwidth": {
        "units": "GHz"|"MHz"|"kHz",
        "value": double
      },
      "centerFrequency": {
        "units": "GHz"|"MHz"|"kHz",
        "value": double
      },
      "polarization": "LEFT_HAND"|"NONE"|"RIGHT_HAND"
    }
  },
  "antennaUplinkConfig": {
    "spectrumConfig": {
      "centerFrequency": {
        "units": "GHz"|"MHz"|"kHz",
        "value": double
      },
      "polarization": "LEFT_HAND"|"NONE"|"RIGHT_HAND"
    },
    "targetEirp": {
      "units": "dBW",
      "value": double
    },
    "transmitDisabled": true|false
  },
  "dataflowEndpointConfig": {
    "dataflowEndpointName": "string",
    "dataflowEndpointRegion": "string"
  },
  "s3RecordingConfig": {
    "bucketArn": "string",
    "prefix": "string",
    "roleArn": "string"
  },
  "trackingConfig": {
    "autotrack": "PREFERRED"|"REMOVED"|"REQUIRED"
  },
  "uplinkEchoConfig": {
    "antennaUplinkConfigArn": "string",
    "enabled": true|false
  }
}

--config-id (string)

UUID of a Config .

--config-type (string)

Type of a Config .

Possible values:

  • antenna-downlink

  • antenna-downlink-demod-decode

  • antenna-uplink

  • dataflow-endpoint

  • tracking

  • uplink-echo

  • s3-recording

--name (string)

Name of a Config .

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

See ‘aws help’ for descriptions of global parameters.

Output

configArn -> (string)

ARN of a Config .

configId -> (string)

UUID of a Config .

configType -> (string)

Type of a Config .

© Copyright 2018, Amazon Web Services. Created using Sphinx.