AWS CLI Command Reference

[ aws . migration-hub-refactor-spaces ]

create-route

Description

Creates an Amazon Web Services Migration Hub Refactor Spaces route. The account owner of the service resource is always the environment owner, regardless of which account creates the route. Routes target a service in the application. If an application does not have any routes, then the first route must be created as a DEFAULT RouteType .

When created, the default route defaults to an active state so state is not a required input. However, like all other state values the state of the default route can be updated after creation, but only when all other routes are also inactive. Conversely, no route can be active without the default route also being active.

When you create a route, Refactor Spaces configures the Amazon API Gateway to send traffic to the target service as follows:

  • If the service has a URL endpoint, and the endpoint resolves to a private IP address, Refactor Spaces routes traffic using the API Gateway VPC link.

  • If the service has a URL endpoint, and the endpoint resolves to a public IP address, Refactor Spaces routes traffic over the public internet.

  • If the service has an Lambda function endpoint, then Refactor Spaces configures the Lambda function’s resource policy to allow the application’s API Gateway to invoke the function.

A one-time health check is performed on the service when either the route is updated from inactive to active, or when it is created with an active state. If the health check fails, the route transitions the route state to FAILED , an error code of SERVICE_ENDPOINT_HEALTH_CHECK_FAILURE is provided, and no traffic is sent to the service.

For Lambda functions, the Lambda function state is checked. If the function is not active, the function configuration is updated so that Lambda resources are provisioned. If the Lambda state is Failed , then the route creation fails. For more information, see the GetFunctionConfiguration’s State response parameter in the Lambda Developer Guide .

For Lambda endpoints, a check is performed to determine that a Lambda function with the specified ARN exists. If it does not exist, the health check fails. For public URLs, a connection is opened to the public endpoint. If the URL is not reachable, the health check fails.

For private URLS, a target group is created on the Elastic Load Balancing and the target group health check is run. The HealthCheckProtocol , HealthCheckPort , and HealthCheckPath are the same protocol, port, and path specified in the URL or health URL, if used. All other settings use the default values, as described in Health checks for your target groups . The health check is considered successful if at least one target within the target group transitions to a healthy state.

Services can have HTTP or HTTPS URL endpoints. For HTTPS URLs, publicly-signed certificates are supported. Private Certificate Authorities (CAs) are permitted only if the CA’s domain is also publicly resolvable.

See also: AWS API Documentation

Synopsis

  create-route
--application-identifier <value>
[--client-token <value>]
[--default-route <value>]
--environment-identifier <value>
--route-type <value>
--service-identifier <value>
[--tags <value>]
[--uri-path-route <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--application-identifier (string)

The ID of the application within which the route is being created.

--client-token (string)

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request.

--default-route (structure)

Configuration for the default route type.

ActivationState -> (string)

If set to ACTIVE , traffic is forwarded to this route’s service after the route is created.

Shorthand Syntax:

ActivationState=string

JSON Syntax:

{
  "ActivationState": "ACTIVE"|"INACTIVE"
}

--environment-identifier (string)

The ID of the environment in which the route is created.

--route-type (string)

The route type of the route. DEFAULT indicates that all traffic that does not match another route is forwarded to the default route. Applications must have a default route before any other routes can be created. URI_PATH indicates a route that is based on a URI path.

Possible values:

  • DEFAULT

  • URI_PATH

--service-identifier (string)

The ID of the service in which the route is created. Traffic that matches this route is forwarded to this service.

--tags (map)

The tags to assign to the route. A tag is a label that you assign to an Amazon Web Services resource. Each tag consists of a key-value pair..

key -> (string)

value -> (string)

Shorthand Syntax:

KeyName1=string,KeyName2=string

JSON Syntax:

{"string": "string"
  ...}

--uri-path-route (structure)

The configuration for the URI path route type.

ActivationState -> (string)

If set to ACTIVE , traffic is forwarded to this route’s service after the route is created.

IncludeChildPaths -> (boolean)

Indicates whether to match all subpaths of the given source path. If this value is false , requests must match the source path exactly before they are forwarded to this route’s service.

Methods -> (list)

A list of HTTP methods to match. An empty list matches all values. If a method is present, only HTTP requests using that method are forwarded to this route’s service.

(string)

SourcePath -> (string)

The path to use to match traffic. Paths must start with / and are relative to the base of the application.

Shorthand Syntax:

ActivationState=string,IncludeChildPaths=boolean,Methods=string,string,SourcePath=string

JSON Syntax:

{
  "ActivationState": "ACTIVE"|"INACTIVE",
  "IncludeChildPaths": true|false,
  "Methods": ["DELETE"|"GET"|"HEAD"|"OPTIONS"|"PATCH"|"POST"|"PUT", ...],
  "SourcePath": "string"
}

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Output

ApplicationId -> (string)

The ID of the application in which the route is created.

Arn -> (string)

The Amazon Resource Name (ARN) of the route. The format for this ARN is ``arn:aws:refactor-spaces:region :account-id :resource-type/resource-id `` . For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference .

CreatedByAccountId -> (string)

The Amazon Web Services account ID of the route creator.

CreatedTime -> (timestamp)

A timestamp that indicates when the route is created.

LastUpdatedTime -> (timestamp)

A timestamp that indicates when the route was last updated.

OwnerAccountId -> (string)

The Amazon Web Services account ID of the route owner.

RouteId -> (string)

The unique identifier of the route.

RouteType -> (string)

The route type of the route.

ServiceId -> (string)

The ID of service in which the route is created. Traffic that matches this route is forwarded to this service.

State -> (string)

The current state of the route. Activation state only allows ACTIVE or INACTIVE as user inputs. FAILED is a route state that is system generated.

Tags -> (map)

The tags assigned to the created route. A tag is a label that you assign to an Amazon Web Services resource. Each tag consists of a key-value pair.

key -> (string)

value -> (string)

UriPathRoute -> (structure)

Configuration for the URI path route type.

ActivationState -> (string)

If set to ACTIVE , traffic is forwarded to this route’s service after the route is created.

IncludeChildPaths -> (boolean)

Indicates whether to match all subpaths of the given source path. If this value is false , requests must match the source path exactly before they are forwarded to this route’s service.

Methods -> (list)

A list of HTTP methods to match. An empty list matches all values. If a method is present, only HTTP requests using that method are forwarded to this route’s service.

(string)

SourcePath -> (string)

The path to use to match traffic. Paths must start with / and are relative to the base of the application.

© Copyright 2018, Amazon Web Services. Created using Sphinx.