[ aws . s3api ]

put-bucket-notification-configuration

Description

Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications .

Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type.

By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration .

<NotificationConfiguration>

</NotificationConfiguration>

This action replaces the existing notification configuration with the configuration you include in the request body.

After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events .

You can disable notifications by adding the empty NotificationConfiguration element.

For more information about the number of event notification configurations that you can create per bucket, see Amazon S3 service quotas in Amazon Web Services General Reference .

By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.

Note

The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.

Responses

If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic.

The following action is related to PutBucketNotificationConfiguration :

See also: AWS API Documentation

Synopsis

  put-bucket-notification-configuration
--bucket <value>
--notification-configuration <value>
[--expected-bucket-owner <value>]
[--skip-destination-validation | --no-skip-destination-validation]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--bucket (string)

The name of the bucket.

--notification-configuration (structure)

A container for specifying the notification configuration of the bucket. If this element is empty, notifications are turned off for the bucket.

TopicConfigurations -> (list)

The topic to which notifications are sent and the events for which notifications are generated.

(structure)

A container for specifying the configuration for publication of messages to an Amazon Simple Notification Service (Amazon SNS) topic when Amazon S3 detects specified events.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don’t provide one, Amazon S3 will assign an ID.

TopicArn -> (string)

The Amazon Resource Name (ARN) of the Amazon SNS topic to which Amazon S3 publishes a message when it detects events of the specified type.

Events -> (list)

The Amazon S3 bucket event about which to send notifications. For more information, see Supported Event Types in the Amazon S3 User Guide .

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon S3 User Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon S3 User Guide .

Value -> (string)

The value that the filter searches for in object key names.

QueueConfigurations -> (list)

The Amazon Simple Queue Service queues to publish messages to and the events for which to publish messages.

(structure)

Specifies the configuration for publishing messages to an Amazon Simple Queue Service (Amazon SQS) queue when Amazon S3 detects specified events.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don’t provide one, Amazon S3 will assign an ID.

QueueArn -> (string)

The Amazon Resource Name (ARN) of the Amazon SQS queue to which Amazon S3 publishes a message when it detects events of the specified type.

Events -> (list)

A collection of bucket events for which to send notifications

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon S3 User Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon S3 User Guide .

Value -> (string)

The value that the filter searches for in object key names.

LambdaFunctionConfigurations -> (list)

Describes the Lambda functions to invoke and the events for which to invoke them.

(structure)

A container for specifying the configuration for Lambda notifications.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don’t provide one, Amazon S3 will assign an ID.

LambdaFunctionArn -> (string)

The Amazon Resource Name (ARN) of the Lambda function that Amazon S3 invokes when the specified event type occurs.

Events -> (list)

The Amazon S3 bucket event for which to invoke the Lambda function. For more information, see Supported Event Types in the Amazon S3 User Guide .

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon S3 User Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon S3 User Guide .

Value -> (string)

The value that the filter searches for in object key names.

EventBridgeConfiguration -> (structure)

Enables delivery of events to Amazon EventBridge.

JSON Syntax:

{
  "TopicConfigurations": [
    {
      "Id": "string",
      "TopicArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold"|"s3:ObjectRestore:Delete"|"s3:LifecycleTransition"|"s3:IntelligentTiering"|"s3:ObjectAcl:Put"|"s3:LifecycleExpiration:*"|"s3:LifecycleExpiration:Delete"|"s3:LifecycleExpiration:DeleteMarkerCreated"|"s3:ObjectTagging:*"|"s3:ObjectTagging:Put"|"s3:ObjectTagging:Delete", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ],
  "QueueConfigurations": [
    {
      "Id": "string",
      "QueueArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold"|"s3:ObjectRestore:Delete"|"s3:LifecycleTransition"|"s3:IntelligentTiering"|"s3:ObjectAcl:Put"|"s3:LifecycleExpiration:*"|"s3:LifecycleExpiration:Delete"|"s3:LifecycleExpiration:DeleteMarkerCreated"|"s3:ObjectTagging:*"|"s3:ObjectTagging:Put"|"s3:ObjectTagging:Delete", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ],
  "LambdaFunctionConfigurations": [
    {
      "Id": "string",
      "LambdaFunctionArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold"|"s3:ObjectRestore:Delete"|"s3:LifecycleTransition"|"s3:IntelligentTiering"|"s3:ObjectAcl:Put"|"s3:LifecycleExpiration:*"|"s3:LifecycleExpiration:Delete"|"s3:LifecycleExpiration:DeleteMarkerCreated"|"s3:ObjectTagging:*"|"s3:ObjectTagging:Put"|"s3:ObjectTagging:Delete", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ],
  "EventBridgeConfiguration": {

  }
}

--expected-bucket-owner (string)

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

--skip-destination-validation | --no-skip-destination-validation (boolean)

Skips validation of Amazon SQS, Amazon SNS, and Lambda destinations. True or false value.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To enable the specified notifications to a bucket

The following put-bucket-notification-configuration example applies a notification configuration to a bucket named my-bucket. The file notification.json is a JSON document in the current folder that specifies an SNS topic and an event type to monitor.

aws s3api put-bucket-notification-configuration \
    --bucket my-bucket \
    --notification-configuration file://notification.json

Contents of notification.json:

{
    "TopicConfigurations": [
        {
            "TopicArn": "arn:aws:sns:us-west-2:123456789012:s3-notification-topic",
            "Events": [
                "s3:ObjectCreated:*"
            ]
        }
    ]
}

The SNS topic must have an IAM policy attached to it that allows Amazon S3 to publish to it.

{
    "Version": "2008-10-17",
    "Id": "example-ID",
    "Statement": [
        {
            "Sid": "example-statement-ID",
            "Effect": "Allow",
            "Principal": {
                "Service": "s3.amazonaws.com"
            },
            "Action": [
                "SNS:Publish"
            ],
            "Resource": "arn:aws:sns:us-west-2:123456789012::s3-notification-topic",
            "Condition": {
                "ArnLike": {
                    "aws:SourceArn": "arn:aws:s3:*:*:my-bucket"
                }
            }
        }
    ]
}

Output

None