AWS CLI Command Reference

[ aws . ecs ]

run-task

Description

Starts a new task using the specified task definition.

You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide .

Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.

The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.

To manage eventual consistency, you can do the following:

  • Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.

  • Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.

See also: AWS API Documentation

Synopsis

  run-task
[--capacity-provider-strategy <value>]
[--cluster <value>]
[--count <value>]
[--enable-ecs-managed-tags | --no-enable-ecs-managed-tags]
[--enable-execute-command | --disable-execute-command]
[--group <value>]
[--launch-type <value>]
[--network-configuration <value>]
[--overrides <value>]
[--placement-constraints <value>]
[--placement-strategy <value>]
[--platform-version <value>]
[--propagate-tags <value>]
[--reference-id <value>]
[--started-by <value>]
[--tags <value>]
--task-definition <value>
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--capacity-provider-strategy (list)

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType .

A capacity provider strategy may contain a maximum of 6 capacity providers.

(structure)

The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.

To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

A capacity provider strategy may contain a maximum of 6 capacity providers.

capacityProvider -> (string)

The short name of the capacity provider.

weight -> (integer)

The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0 , any RunTask or CreateService actions using the capacity provider strategy will fail.

An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that’s run using capacityProviderA , four tasks would use capacityProviderB .

base -> (integer)

The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

Shorthand Syntax:

capacityProvider=string,weight=integer,base=integer ...

JSON Syntax:

[
  {
    "capacityProvider": "string",
    "weight": integer,
    "base": integer
  }
  ...
]

--cluster (string)

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

--count (integer)

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

--enable-ecs-managed-tags | --no-enable-ecs-managed-tags (boolean)

Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .

--enable-execute-command | --disable-execute-command (boolean)

Determines whether to use the execute command functionality for the containers in this task. If true , this enables execute command functionality on all containers in the task.

If true , then the task definition must have a task role, or you must provide one as an override.

--group (string)

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name ).

--launch-type (string)

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide .

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Note

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate .

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType .

Possible values:

  • EC2

  • FARGATE

  • EXTERNAL

--network-configuration (structure)

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn’t supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide .

awsvpcConfiguration -> (structure)

The VPC subnets and security groups that are associated with a task.

Note

All specified subnets and security groups must be from the same VPC.

subnets -> (list)

The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per AwsVpcConfiguration .

Note

All specified subnets must be from the same VPC.

(string)

securityGroups -> (list)

The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per AwsVpcConfiguration .

Note

All specified security groups must be from the same VPC.

(string)

assignPublicIp -> (string)

Whether the task’s elastic network interface receives a public IP address. The default value is DISABLED .

Shorthand Syntax:

awsvpcConfiguration={subnets=[string,string],securityGroups=[string,string],assignPublicIp=string}

JSON Syntax:

{
  "awsvpcConfiguration": {
    "subnets": ["string", ...],
    "securityGroups": ["string", ...],
    "assignPublicIp": "ENABLED"|"DISABLED"
  }
}

--overrides (structure)

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that’s specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

containerOverrides -> (list)

One or more container overrides that are sent to a task.

(structure)

The overrides that are sent to a container. An empty container override can be passed in. An example of an empty container override is {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.

name -> (string)

The name of the container that receives the override. This parameter is required if any override is specified.

command -> (list)

The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.

(string)

environment -> (list)

The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.

(structure)

A key-value pair object.

name -> (string)

The name of the key-value pair. For environment variables, this is the name of the environment variable.

value -> (string)

The value of the key-value pair. For environment variables, this is the value of the environment variable.

environmentFiles -> (list)

A list of files containing the environment variables to pass to a container, instead of the value from the container definition.

(structure)

A list of files containing the environment variables to pass to a container. You can specify up to ten environment files. The file must have a .env file extension. Each line in an environment file should contain an environment variable in VARIABLE=VALUE format. Lines beginning with # are treated as comments and are ignored. For more information about the environment variable file syntax, see Declare default environment variables in file .

If there are environment variables specified using the environment parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they’re processed from the top down. We recommend that you use unique variable names. For more information, see Specifying environment variables in the Amazon Elastic Container Service Developer Guide .

This parameter is only supported for tasks hosted on Fargate using the following platform versions:

  • Linux platform version 1.4.0 or later.

  • Windows platform version 1.0.0 or later.

value -> (string)

The Amazon Resource Name (ARN) of the Amazon S3 object containing the environment variable file.

type -> (string)

The file type to use. The only supported value is s3 .

cpu -> (integer)

The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.

memory -> (integer)

The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.

memoryReservation -> (integer)

The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.

resourceRequirements -> (list)

The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.

(structure)

The type and amount of a resource to assign to a container. The supported resource types are GPUs and Elastic Inference accelerators. For more information, see Working with GPUs on Amazon ECS or Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide

value -> (string)

The value for the specified resource type.

If the GPU type is used, the value is the number of physical GPUs the Amazon ECS container agent reserves for the container. The number of GPUs that’s reserved for all containers in a task can’t exceed the number of available GPUs on the container instance that the task is launched on.

If the InferenceAccelerator type is used, the value matches the deviceName for an InferenceAccelerator specified in a task definition.

type -> (string)

The type of resource to assign to a container. The supported values are GPU or InferenceAccelerator .

cpu -> (string)

The CPU override for the task.

inferenceAcceleratorOverrides -> (list)

The Elastic Inference accelerator override for the task.

(structure)

Details on an Elastic Inference accelerator task override. This parameter is used to override the Elastic Inference accelerator specified in the task definition. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide .

deviceName -> (string)

The Elastic Inference accelerator device name to override for the task. This parameter must match a deviceName specified in the task definition.

deviceType -> (string)

The Elastic Inference accelerator type to use.

executionRoleArn -> (string)

The Amazon Resource Name (ARN) of the task execution IAM role override for the task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide .

memory -> (string)

The memory override for the task.

taskRoleArn -> (string)

The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Role for Tasks in the Amazon Elastic Container Service Developer Guide .

ephemeralStorage -> (structure)

The ephemeral storage setting override for the task.

Note

This parameter is only supported for tasks hosted on Fargate that use the following platform versions:

  • Linux platform version 1.4.0 or later.

  • Windows platform version 1.0.0 or later.

sizeInGiB -> (integer)

The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is 21 GiB and the maximum supported value is 200 GiB.

JSON Syntax:

{
  "containerOverrides": [
    {
      "name": "string",
      "command": ["string", ...],
      "environment": [
        {
          "name": "string",
          "value": "string"
        }
        ...
      ],
      "environmentFiles": [
        {
          "value": "string",
          "type": "s3"
        }
        ...
      ],
      "cpu": integer,
      "memory": integer,
      "memoryReservation": integer,
      "resourceRequirements": [
        {
          "value": "string",
          "type": "GPU"|"InferenceAccelerator"
        }
        ...
      ]
    }
    ...
  ],
  "cpu": "string",
  "inferenceAcceleratorOverrides": [
    {
      "deviceName": "string",
      "deviceType": "string"
    }
    ...
  ],
  "executionRoleArn": "string",
  "memory": "string",
  "taskRoleArn": "string",
  "ephemeralStorage": {
    "sizeInGiB": integer
  }
}

--placement-constraints (list)

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

(structure)

An object representing a constraint on task placement. For more information, see Task placement constraints in the Amazon Elastic Container Service Developer Guide .

Note

If you’re using the Fargate launch type, task placement constraints aren’t supported.

type -> (string)

The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.

expression -> (string)

A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can’t specify an expression if the constraint type is distinctInstance . For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide .

Shorthand Syntax:

type=string,expression=string ...

JSON Syntax:

[
  {
    "type": "distinctInstance"|"memberOf",
    "expression": "string"
  }
  ...
]

--placement-strategy (list)

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

(structure)

The task placement strategy for a task or service. For more information, see Task placement strategies in the Amazon Elastic Container Service Developer Guide .

type -> (string)

The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that’s specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.

field -> (string)

The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that’s applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.

Shorthand Syntax:

type=string,field=string ...

JSON Syntax:

[
  {
    "type": "random"|"spread"|"binpack",
    "field": "string"
  }
  ...
]

--platform-version (string)

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn’t specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide .

--propagate-tags (string)

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren’t propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

Note

An error will be received if you specify the SERVICE option when running a task.

Possible values:

  • TASK_DEFINITION

  • SERVICE

  • NONE

--reference-id (string)

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

--started-by (string)

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

--tags (list)

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

  • Maximum number of tags per resource - 50

  • For each resource, each tag key must be unique, and each tag key can have only one value.

  • Maximum key length - 128 Unicode characters in UTF-8

  • Maximum value length - 256 Unicode characters in UTF-8

  • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

  • Tag keys and values are case-sensitive.

  • Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

(structure)

The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

The following basic restrictions apply to tags:

  • Maximum number of tags per resource - 50

  • For each resource, each tag key must be unique, and each tag key can have only one value.

  • Maximum key length - 128 Unicode characters in UTF-8

  • Maximum value length - 256 Unicode characters in UTF-8

  • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

  • Tag keys and values are case-sensitive.

  • Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

key -> (string)

One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

value -> (string)

The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

Shorthand Syntax:

key=string,value=string ...

JSON Syntax:

[
  {
    "key": "string",
    "value": "string"
  }
  ...
]

--task-definition (string)

The family and revision (family:revision ) or full ARN of the task definition to run. If a revision isn’t specified, the latest ACTIVE revision is used.

When you create an IAM policy for run-task, you can set the resource to be the latest task definition revision, or a specific revision.

The full ARN value must match the value that you specified as the Resource of the IAM principal’s permissions policy.

When you specify the policy resource as the latest task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName ), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName .

When you specify the policy resource as a specific task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1 or arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:* ), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1 .

For more information, see Policy Resources for Amazon ECS in the Amazon Elastic Container Service developer Guide.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To run a task on your default cluster

The following run-task example runs a task on the default cluster.

aws ecs run-task --cluster default --task-definition sleep360:1

Output:

{
    "tasks": [
        {
            "taskArn": "arn:aws:ecs:us-west-2:123456789012:task/a1b2c3d4-5678-90ab-ccdef-11111EXAMPLE",
            "overrides": {
                "containerOverrides": [
                    {
                        "name": "sleep"
                    }
                ]
            },
            "lastStatus": "PENDING",
            "containerInstanceArn": "arn:aws:ecs:us-west-2:123456789012:container-instance/a1b2c3d4-5678-90ab-ccdef-22222EXAMPLE",
            "desiredStatus": "RUNNING",
            "taskDefinitionArn": "arn:aws:ecs:us-west-2:123456789012:task-definition/sleep360:1",
            "containers": [
                {
                    "containerArn": "arn:aws:ecs:us-west-2:123456789012:container/a1b2c3d4-5678-90ab-ccdef-33333EXAMPLE",
                    "taskArn": "arn:aws:ecs:us-west-2:123456789012:task/a1b2c3d4-5678-90ab-ccdef-11111EXAMPLE",
                    "lastStatus": "PENDING",
                    "name": "sleep"
                }
            ]
        }
    ]
}

For more information, see Running Tasks in the Amazon ECS Developer Guide.

Output

tasks -> (list)

A full description of the tasks that were run. The tasks that were successfully placed on your cluster are described here.

(structure)

Details on a task in a cluster.

attachments -> (list)

The Elastic Network Adapter that’s associated with the task if the task uses the awsvpc network mode.

(structure)

An object representing a container instance or task attachment.

id -> (string)

The unique identifier for the attachment.

type -> (string)

The type of the attachment, such as ElasticNetworkInterface .

status -> (string)

The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING , ATTACHED , DETACHING , DETACHED , DELETED , and FAILED .

details -> (list)

Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.

(structure)

A key-value pair object.

name -> (string)

The name of the key-value pair. For environment variables, this is the name of the environment variable.

value -> (string)

The value of the key-value pair. For environment variables, this is the value of the environment variable.

attributes -> (list)

The attributes of the task

(structure)

An attribute is a name-value pair that’s associated with an Amazon ECS object. Use attributes to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide .

name -> (string)

The name of the attribute. The name must contain between 1 and 128 characters. The name may contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), forward slashes (/), back slashes (), or periods (.).

value -> (string)

The value of the attribute. The value must contain between 1 and 128 characters. It can contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), periods (.), at signs (@), forward slashes (/), back slashes (), colons (:), or spaces. The value can’t start or end with a space.

targetType -> (string)

The type of the target to attach the attribute with. This parameter is required if you use the short form ID for a resource instead of the full ARN.

targetId -> (string)

The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).

availabilityZone -> (string)

The Availability Zone for the task.

capacityProviderName -> (string)

The capacity provider that’s associated with the task.

clusterArn -> (string)

The ARN of the cluster that hosts the task.

connectivity -> (string)

The connectivity status of a task.

connectivityAt -> (timestamp)

The Unix timestamp for the time when the task last went into CONNECTED status.

containerInstanceArn -> (string)

The ARN of the container instances that host the task.

containers -> (list)

The containers that’s associated with the task.

(structure)

A Docker container that’s part of a task.

containerArn -> (string)

The Amazon Resource Name (ARN) of the container.

taskArn -> (string)

The ARN of the task.

name -> (string)

The name of the container.

image -> (string)

The image used for the container.

imageDigest -> (string)

The container image manifest digest.

Note

The imageDigest is only returned if the container is using an image hosted in Amazon ECR, otherwise it is omitted.

runtimeId -> (string)

The ID of the Docker container.

lastStatus -> (string)

The last known status of the container.

exitCode -> (integer)

The exit code returned from the container.

reason -> (string)

A short (255 max characters) human-readable string to provide additional details about a running or stopped container.

networkBindings -> (list)

The network bindings associated with the container.

(structure)

Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.

bindIP -> (string)

The IP address that the container is bound to on the container instance.

containerPort -> (integer)

The port number on the container that’s used with the network binding.

hostPort -> (integer)

The port number on the host that’s used with the network binding.

protocol -> (string)

The protocol used for the network binding.

containerPortRange -> (string)

The port number range on the container that’s bound to the dynamically mapped host port range.

The following rules apply when you specify a containerPortRange :

  • You must use either the bridge network mode or the awsvpc network mode.

  • This parameter is available for both the EC2 and Fargate launch types.

  • This parameter is available for both the Linux and Windows operating systems.

  • The container instance must have at least version 1.67.0 of the container agent and at least version 1.67.0-1 of the ecs-init package

  • You can specify a maximum of 100 port ranges per container.

  • You do not specify a hostPortRange . The value of the hostPortRange is set as follows:

    • For containers in a task with the awsvpc network mode, the hostPort is set to the same value as the containerPort . This is a static mapping strategy.

    • For containers in a task with the bridge network mode, the Amazon ECS agent finds open host ports from the default ephemeral range and passes it to docker to bind them to the container ports.

  • The containerPortRange valid values are between 1 and 65535.

  • A port can only be included in one port mapping per container.

  • You cannot specify overlapping port ranges.

  • The first port in the range must be less than last port in the range.

  • Docker recommends that you turn off the docker-proxy in the Docker daemon config file when you have a large number of ports. For more information, see Issue #11185 on the Github website. For information about how to turn off the docker-proxy in the Docker daemon config file, see Docker daemon in the Amazon ECS Developer Guide .

You can call ` DescribeTasks https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeTasks.html`__ to view the hostPortRange which are the host ports that are bound to the container ports.

hostPortRange -> (string)

The port number range on the host that’s used with the network binding. This is assigned is assigned by Docker and delivered by the Amazon ECS agent.

networkInterfaces -> (list)

The network interfaces associated with the container.

(structure)

An object representing the elastic network interface for tasks that use the awsvpc network mode.

attachmentId -> (string)

The attachment ID for the network interface.

privateIpv4Address -> (string)

The private IPv4 address for the network interface.

ipv6Address -> (string)

The private IPv6 address for the network interface.

healthStatus -> (string)

The health status of the container. If health checks aren’t configured for this container in its task definition, then it reports the health status as UNKNOWN .

managedAgents -> (list)

The details of any Amazon ECS managed agents associated with the container.

(structure)

Details about the managed agent status for the container.

lastStartedAt -> (timestamp)

The Unix timestamp for the time when the managed agent was last started.

name -> (string)

The name of the managed agent. When the execute command feature is enabled, the managed agent name is ExecuteCommandAgent .

reason -> (string)

The reason for why the managed agent is in the state it is in.

lastStatus -> (string)

The last known status of the managed agent.

cpu -> (string)

The number of CPU units set for the container. The value is 0 if no value was specified in the container definition when the task definition was registered.

memory -> (string)

The hard limit (in MiB) of memory set for the container.

memoryReservation -> (string)

The soft limit (in MiB) of memory set for the container.

gpuIds -> (list)

The IDs of each GPU assigned to the container.

(string)

cpu -> (string)

The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units (for example, 1024 ). It can also be expressed as a string using vCPUs (for example, 1 vCPU or 1 vcpu ). String values are converted to an integer that indicates the CPU units when the task definition is registered.

If you use the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).

If you use the Fargate launch type, this field is required. You must use one of the following values. These values determine the range of supported values for the memory parameter:

The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.

  • 256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)

  • 512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)

  • 1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)

  • 2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)

  • 4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)

  • 8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments This option requires Linux platform 1.4.0 or later.

  • 16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments This option requires Linux platform 1.4.0 or later.

createdAt -> (timestamp)

The Unix timestamp for the time when the task was created. More specifically, it’s for the time when the task entered the PENDING state.

desiredStatus -> (string)

The desired status of the task. For more information, see Task Lifecycle .

enableExecuteCommand -> (boolean)

Determines whether execute command functionality is enabled for this task. If true , execute command functionality is enabled on all the containers in the task.

executionStoppedAt -> (timestamp)

The Unix timestamp for the time when the task execution stopped.

group -> (string)

The name of the task group that’s associated with the task.

healthStatus -> (string)

The health status for the task. It’s determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY , the task status also reports as HEALTHY . If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN , the task status also reports as UNHEALTHY or UNKNOWN .

Note

The Amazon ECS container agent doesn’t monitor or report on Docker health checks that are embedded in a container image and not specified in the container definition. For example, this includes those specified in a parent image or from the image’s Dockerfile. Health check parameters that are specified in a container definition override any Docker health checks that are found in the container image.

inferenceAccelerators -> (list)

The Elastic Inference accelerator that’s associated with the task.

(structure)

Details on an Elastic Inference accelerator. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide .

deviceName -> (string)

The Elastic Inference accelerator device name. The deviceName must also be referenced in a container definition as a ResourceRequirement .

deviceType -> (string)

The Elastic Inference accelerator type to use.

lastStatus -> (string)

The last known status for the task. For more information, see Task Lifecycle .

launchType -> (string)

The infrastructure where your task runs on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide .

memory -> (string)

The amount of memory (in MiB) that the task uses as expressed in a task definition. It can be expressed as an integer using MiB (for example, 1024 ). If it’s expressed as a string using GB (for example, 1GB or 1 GB ), it’s converted to an integer indicating the MiB when the task definition is registered.

If you use the EC2 launch type, this field is optional.

If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines the range of supported values for the cpu parameter.

  • 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)

  • 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)

  • 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)

  • Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)

  • Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)

  • Between 16 GB and 60 GB in 4 GB increments - Available cpu values: 8192 (8 vCPU) This option requires Linux platform 1.4.0 or later.

  • Between 32GB and 120 GB in 8 GB increments - Available cpu values: 16384 (16 vCPU) This option requires Linux platform 1.4.0 or later.

overrides -> (structure)

One or more container overrides.

containerOverrides -> (list)

One or more container overrides that are sent to a task.

(structure)

The overrides that are sent to a container. An empty container override can be passed in. An example of an empty container override is {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.

name -> (string)

The name of the container that receives the override. This parameter is required if any override is specified.

command -> (list)

The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.

(string)

environment -> (list)

The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.

(structure)

A key-value pair object.

name -> (string)

The name of the key-value pair. For environment variables, this is the name of the environment variable.

value -> (string)

The value of the key-value pair. For environment variables, this is the value of the environment variable.

environmentFiles -> (list)

A list of files containing the environment variables to pass to a container, instead of the value from the container definition.

(structure)

A list of files containing the environment variables to pass to a container. You can specify up to ten environment files. The file must have a .env file extension. Each line in an environment file should contain an environment variable in VARIABLE=VALUE format. Lines beginning with # are treated as comments and are ignored. For more information about the environment variable file syntax, see Declare default environment variables in file .

If there are environment variables specified using the environment parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they’re processed from the top down. We recommend that you use unique variable names. For more information, see Specifying environment variables in the Amazon Elastic Container Service Developer Guide .

This parameter is only supported for tasks hosted on Fargate using the following platform versions:

  • Linux platform version 1.4.0 or later.

  • Windows platform version 1.0.0 or later.

value -> (string)

The Amazon Resource Name (ARN) of the Amazon S3 object containing the environment variable file.

type -> (string)

The file type to use. The only supported value is s3 .

cpu -> (integer)

The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.

memory -> (integer)

The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.

memoryReservation -> (integer)

The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.

resourceRequirements -> (list)

The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.

(structure)

The type and amount of a resource to assign to a container. The supported resource types are GPUs and Elastic Inference accelerators. For more information, see Working with GPUs on Amazon ECS or Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide

value -> (string)

The value for the specified resource type.

If the GPU type is used, the value is the number of physical GPUs the Amazon ECS container agent reserves for the container. The number of GPUs that’s reserved for all containers in a task can’t exceed the number of available GPUs on the container instance that the task is launched on.

If the InferenceAccelerator type is used, the value matches the deviceName for an InferenceAccelerator specified in a task definition.

type -> (string)

The type of resource to assign to a container. The supported values are GPU or InferenceAccelerator .

cpu -> (string)

The CPU override for the task.

inferenceAcceleratorOverrides -> (list)

The Elastic Inference accelerator override for the task.

(structure)

Details on an Elastic Inference accelerator task override. This parameter is used to override the Elastic Inference accelerator specified in the task definition. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide .

deviceName -> (string)

The Elastic Inference accelerator device name to override for the task. This parameter must match a deviceName specified in the task definition.

deviceType -> (string)

The Elastic Inference accelerator type to use.

executionRoleArn -> (string)

The Amazon Resource Name (ARN) of the task execution IAM role override for the task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide .

memory -> (string)

The memory override for the task.

taskRoleArn -> (string)

The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Role for Tasks in the Amazon Elastic Container Service Developer Guide .

ephemeralStorage -> (structure)

The ephemeral storage setting override for the task.

Note

This parameter is only supported for tasks hosted on Fargate that use the following platform versions:

  • Linux platform version 1.4.0 or later.

  • Windows platform version 1.0.0 or later.

sizeInGiB -> (integer)

The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is 21 GiB and the maximum supported value is 200 GiB.

platformVersion -> (string)

The platform version where your task runs on. A platform version is only specified for tasks that use the Fargate launch type. If you didn’t specify one, the LATEST platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .

platformFamily -> (string)

The operating system that your tasks are running on. A platform family is specified only for tasks that use the Fargate launch type.

All tasks that run as part of this service must use the same platformFamily value as the service (for example, LINUX. ).

pullStartedAt -> (timestamp)

The Unix timestamp for the time when the container image pull began.

pullStoppedAt -> (timestamp)

The Unix timestamp for the time when the container image pull completed.

startedAt -> (timestamp)

The Unix timestamp for the time when the task started. More specifically, it’s for the time when the task transitioned from the PENDING state to the RUNNING state.

startedBy -> (string)

The tag specified when a task is started. If an Amazon ECS service started the task, the startedBy parameter contains the deployment ID of that service.

stopCode -> (string)

The stop code indicating why a task was stopped. The stoppedReason might contain additional details.

The following are valid values:

  • TaskFailedToStart

  • EssentialContainerExited

  • UserInitiated

  • TerminationNotice

  • ServiceSchedulerInitiated

  • SpotInterruption

stoppedAt -> (timestamp)

The Unix timestamp for the time when the task was stopped. More specifically, it’s for the time when the task transitioned from the RUNNING state to the STOPPED state.

stoppedReason -> (string)

The reason that the task was stopped.

stoppingAt -> (timestamp)

The Unix timestamp for the time when the task stops. More specifically, it’s for the time when the task transitions from the RUNNING state to STOPPED .

tags -> (list)

The metadata that you apply to the task to help you categorize and organize the task. Each tag consists of a key and an optional value. You define both the key and value.

The following basic restrictions apply to tags:

  • Maximum number of tags per resource - 50

  • For each resource, each tag key must be unique, and each tag key can have only one value.

  • Maximum key length - 128 Unicode characters in UTF-8

  • Maximum value length - 256 Unicode characters in UTF-8

  • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

  • Tag keys and values are case-sensitive.

  • Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

(structure)

The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

The following basic restrictions apply to tags:

  • Maximum number of tags per resource - 50

  • For each resource, each tag key must be unique, and each tag key can have only one value.

  • Maximum key length - 128 Unicode characters in UTF-8

  • Maximum value length - 256 Unicode characters in UTF-8

  • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

  • Tag keys and values are case-sensitive.

  • Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

key -> (string)

One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

value -> (string)

The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

taskArn -> (string)

The Amazon Resource Name (ARN) of the task.

taskDefinitionArn -> (string)

The ARN of the task definition that creates the task.

version -> (long)

The version counter for the task. Every time a task experiences a change that starts a CloudWatch event, the version counter is incremented. If you replicate your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actions with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.

ephemeralStorage -> (structure)

The ephemeral storage settings for the task.

sizeInGiB -> (integer)

The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is 21 GiB and the maximum supported value is 200 GiB.

failures -> (list)

Any failures associated with the call.

(structure)

A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide .

arn -> (string)

The Amazon Resource Name (ARN) of the failed resource.

reason -> (string)

The reason for the failure.

detail -> (string)

The details of the failure.

© Copyright 2018, Amazon Web Services. Created using Sphinx.