AWS CLI Command Reference

[ aws . s3api ]

create-bucket

Description

Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner.

Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules .

If you want to create an Amazon S3 on Outposts bucket, see Create Bucket .

By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket .

Note

If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets .

Access control lists (ACLs)

When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.

Warning

If your CreateBucket request sets bucket owner enforced for S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAclWithObjectOwnership error code. For more information, see Controlling object ownership in the Amazon S3 User Guide .

There are two ways to grant the appropriate permissions using the request headers.

  • Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs . Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL .

  • Specify access permissions explicitly using the x-amz-grant-read , x-amz-grant-write , x-amz-grant-read-acp , x-amz-grant-write-acp , and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview . You specify each grantee as a type=value pair, where the type is one of the following:

    • id – if the value specified is the canonical user ID of an Amazon Web Services account

    • uri – if you are granting permissions to a predefined group

    • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Note

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

Note

You can use either a canned ACL or specify access permissions explicitly. You cannot do both.

Permissions

In addition to s3:CreateBucket , the following permissions are required when your CreateBucket includes specific headers:

  • ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn’t specify any ACLs, only s3:CreateBucket permission is needed.

  • Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.

  • S3 Object Ownership - If your CreateBucket request includes the the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.

The following operations are related to CreateBucket :

See also: AWS API Documentation

Synopsis

  create-bucket
[--acl <value>]
--bucket <value>
[--create-bucket-configuration <value>]
[--grant-full-control <value>]
[--grant-read <value>]
[--grant-read-acp <value>]
[--grant-write <value>]
[--grant-write-acp <value>]
[--object-lock-enabled-for-bucket | --no-object-lock-enabled-for-bucket]
[--object-ownership <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--acl (string)

The canned ACL to apply to the bucket.

Possible values:

  • private

  • public-read

  • public-read-write

  • authenticated-read

--bucket (string)

The name of the bucket to create.

--create-bucket-configuration (structure)

The configuration information for the bucket.

LocationConstraint -> (string)

Specifies the Region where the bucket will be created. If you don’t specify a Region, the bucket is created in the US East (N. Virginia) Region (us-east-1).

Shorthand Syntax:

LocationConstraint=string

JSON Syntax:

{
  "LocationConstraint": "af-south-1"|"ap-east-1"|"ap-northeast-1"|"ap-northeast-2"|"ap-northeast-3"|"ap-south-1"|"ap-southeast-1"|"ap-southeast-2"|"ap-southeast-3"|"ca-central-1"|"cn-north-1"|"cn-northwest-1"|"EU"|"eu-central-1"|"eu-north-1"|"eu-south-1"|"eu-west-1"|"eu-west-2"|"eu-west-3"|"me-south-1"|"sa-east-1"|"us-east-2"|"us-gov-east-1"|"us-gov-west-1"|"us-west-1"|"us-west-2"
}

--grant-full-control (string)

Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.

--grant-read (string)

Allows grantee to list the objects in the bucket.

--grant-read-acp (string)

Allows grantee to read the bucket ACL.

--grant-write (string)

Allows grantee to create new objects in the bucket.

For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.

--grant-write-acp (string)

Allows grantee to write the ACL for the applicable bucket.

--object-lock-enabled-for-bucket | --no-object-lock-enabled-for-bucket (boolean)

Specifies whether you want S3 Object Lock to be enabled for the new bucket.

--object-ownership (string)

The container element for object ownership for a bucket’s ownership controls.

BucketOwnerPreferred - Objects uploaded to the bucket change ownership to the bucket owner if the objects are uploaded with the bucket-owner-full-control canned ACL.

ObjectWriter - The uploading account will own the object if the object is uploaded with the bucket-owner-full-control canned ACL.

BucketOwnerEnforced - Access control lists (ACLs) are disabled and no longer affect permissions. The bucket owner automatically owns and has full control over every object in the bucket. The bucket only accepts PUT requests that don’t specify an ACL or bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format.

Possible values:

  • BucketOwnerPreferred

  • ObjectWriter

  • BucketOwnerEnforced

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

Example 1: To create a bucket

The following create-bucket example creates a bucket named my-bucket:

aws s3api create-bucket \
    --bucket my-bucket \
    --region us-east-1

Output:

{
    "Location": "/my-bucket"
}

For more information, see Creating a bucket in the Amazon S3 User Guide.

Example 2: To create a bucket with owner enforced

The following create-bucket example creates a bucket named my-bucket that uses the bucket owner enforced setting for S3 Object Ownership.

aws s3api create-bucket \
    --bucket my-bucket \
    --region us-east-1 \
    --object-ownership BucketOwnerEnforced

Output:

{
    "Location": "/my-bucket"
}

For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.

Example 3: To create a bucket outside of the ``us-east-1`` region

The following create-bucket example creates a bucket named my-bucket in the eu-west-1 region. Regions outside of us-east-1 require the appropriate LocationConstraint to be specified in order to create the bucket in the desired region.

aws s3api create-bucket \
    --bucket my-bucket \
    --region eu-west-1 \
    --create-bucket-configuration LocationConstraint=eu-west-1

Output:

{
    "Location": "http://my-bucket.s3.amazonaws.com/"
}

For more information, see Creating a bucket in the Amazon S3 User Guide.

Output

Location -> (string)

A forward slash followed by the name of the bucket.

© Copyright 2018, Amazon Web Services. Created using Sphinx.