AWS CLI Command Reference

[ aws . ses ]

send-templated-email

Description

Composes an email message using an email template and immediately queues it for sending.

In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:

  • The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.

  • The message must be sent from a verified email address or domain.

  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

  • The maximum message size is 10 MB.

  • Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.

  • The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain ), the entire message will be rejected, even if the message contains other recipients that are valid.

Warning

If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can’t render the email because the template contains errors, it doesn’t send the email. Additionally, because it already accepted the message, Amazon SES doesn’t return a message stating that it was unable to send the email.

For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide .

See also: AWS API Documentation

Synopsis

  send-templated-email
--source <value>
--destination <value>
[--reply-to-addresses <value>]
[--return-path <value>]
[--source-arn <value>]
[--return-path-arn <value>]
[--tags <value>]
[--configuration-set-name <value>]
--template <value>
[--template-arn <value>]
--template-data <value>
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--source (string)

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide .

If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide .

Note

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531 . For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters . If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492 . The sender name (also known as the friendly name ) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in`RFC 2047 <https://tools.ietf.org/html/rfc2047>`__ . MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?= .

--destination (structure)

The destination for this email, composed of To:, CC:, and BCC: fields. A Destination can include up to 50 recipients across these three fields.

ToAddresses -> (list)

The recipients to place on the To: line of the message.

(string)

CcAddresses -> (list)

The recipients to place on the CC: line of the message.

(string)

BccAddresses -> (list)

The recipients to place on the BCC: line of the message.

(string)

Shorthand Syntax:

ToAddresses=string,string,CcAddresses=string,string,BccAddresses=string,string

JSON Syntax:

{
  "ToAddresses": ["string", ...],
  "CcAddresses": ["string", ...],
  "BccAddresses": ["string", ...]
}

--reply-to-addresses (list)

The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

(string)

Syntax:

"string" "string" ...

--return-path (string)

The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient’s ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

--source-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to it that authorizes you to send from user@example.com , then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com , and the Source to be user@example.com .

For more information about sending authorization, see the Amazon SES Developer Guide .

--return-path-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to it that authorizes you to use feedback@example.com , then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com , and the ReturnPath to be feedback@example.com .

For more information about sending authorization, see the Amazon SES Developer Guide .

--tags (list)

A list of tags, in the form of name/value pairs, to apply to an email that you send using SendTemplatedEmail . Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

(structure)

Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email.

Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide .

Name -> (string)

The name of the tag. The name must:

  • This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).

  • Contain less than 256 characters.

Value -> (string)

The value of the tag. The value must:

  • This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).

  • Contain less than 256 characters.

Shorthand Syntax:

Name=string,Value=string ...

JSON Syntax:

[
  {
    "Name": "string",
    "Value": "string"
  }
  ...
]

--configuration-set-name (string)

The name of the configuration set to use when you send an email using SendTemplatedEmail .

--template (string)

The template to use when sending this email.

--template-arn (string)

The ARN of the template to use when sending this email.

--template-data (string)

A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Output

MessageId -> (string)

The unique message identifier returned from the SendTemplatedEmail action.

© Copyright 2018, Amazon Web Services. Created using Sphinx.