AWS CLI Command Reference

[ aws . sts ]

assume-role-with-saml

Description

Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based Amazon Web Services access without user-specific credentials or configuration. For a comparison of AssumeRoleWithSAML with the other API operations that produce temporary credentials, see Requesting Temporary Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide .

The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services services.

Session Duration

By default, the temporary security credentials created by AssumeRoleWithSAML last for one hour. However, you can use the optional DurationSeconds parameter to specify the duration of your session. Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication response’s SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide . The maximum session duration limit applies when you use the AssumeRole* API operations or the assume-role* CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see Using IAM Roles in the IAM User Guide .

Note

Role chaining limits your CLI or Amazon Web Services API role session to a maximum of one hour. When you use the AssumeRole API operation to assume a role, you can specify the duration of your role session with the DurationSeconds parameter. You can specify a parameter value of up to 43200 seconds (12 hours), depending on the maximum session duration setting for your role. However, if you assume a role using role chaining and provide a DurationSeconds parameter value greater than one hour, the operation fails.

Permissions

The temporary security credentials created by AssumeRoleWithSAML can be used to make API calls to any Amazon Web Services service with the following exception: you cannot call the STS GetFederationToken or GetSessionToken API operations.

(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can’t exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session’s permissions are the intersection of the role’s identity-based policy and the session policies. You can use the role’s temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide .

Calling AssumeRoleWithSAML does not require the use of Amazon Web Services security credentials. The identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider entity for your identity provider.

Warning

Calling AssumeRoleWithSAML can result in an entry in your CloudTrail logs. The entry includes the value in the NameID element of the SAML assertion. We recommend that you use a NameIDType that is not associated with any personally identifiable information (PII). For example, you could instead use the persistent identifier (urn:oasis:names:tc:SAML:2.0:nameid-format:persistent ).

Tags

(Optional) You can configure your IdP to pass attributes into your SAML assertion as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide .

You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide .

Note

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

You can pass a session tag with the same key as a tag that is attached to the role. When you do, session tags override the role’s tags with the same key.

An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide .

You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide .

SAML Configuration

Before your application can call AssumeRoleWithSAML , you must configure your SAML identity provider (IdP) to issue the claims required by Amazon Web Services. Additionally, you must use Identity and Access Management (IAM) to create a SAML provider entity in your Amazon Web Services account that represents your identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy.

For more information, see the following resources:

See also: AWS API Documentation

Synopsis

  assume-role-with-saml
--role-arn <value>
--principal-arn <value>
--saml-assertion <value>
[--policy-arns <value>]
[--policy <value>]
[--duration-seconds <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--role-arn (string)

The Amazon Resource Name (ARN) of the role that the caller is assuming.

--principal-arn (string)

The Amazon Resource Name (ARN) of the SAML provider in IAM that describes the IdP.

--saml-assertion (string)

The base64 encoded SAML authentication response provided by the IdP.

For more information, see Configuring a Relying Party and Adding Claims in the IAM User Guide .

--policy-arns (list)

The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.

This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plaintext that you use for both inline and managed session policies can’t exceed 2,048 characters. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

Note

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

Passing policies to this operation returns new temporary credentials. The resulting session’s permissions are the intersection of the role’s identity-based policy and the session policies. You can use the role’s temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide .

(structure)

A reference to the IAM managed policy that is passed as a session policy for a role session or a federated user session.

arn -> (string)

The Amazon Resource Name (ARN) of the IAM managed policy to use as a session policy for the role. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference .

Shorthand Syntax:

arn=string ...

JSON Syntax:

[
  {
    "arn": "string"
  }
  ...
]

--policy (string)

An IAM policy in JSON format that you want to use as an inline session policy.

This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session’s permissions are the intersection of the role’s identity-based policy and the session policies. You can use the role’s temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide .

The plaintext that you use for both inline and managed session policies can’t exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (u0020 through u00FF). It can also include the tab (u0009), linefeed (u000A), and carriage return (u000D) characters.

Note

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

--duration-seconds (integer)

The duration, in seconds, of the role session. Your role session lasts for the duration that you specify for the DurationSeconds parameter, or until the time specified in the SAML authentication response’s SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide .

By default, the value is set to 3600 seconds.

Note

The DurationSeconds parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a SessionDuration parameter that specifies the maximum length of the console session. For more information, see Creating a URL that Enables Federated Users to Access the Amazon Web Services Management Console in the IAM User Guide .

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json

  • text

  • table

  • yaml

  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on

  • off

  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64

  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To get short-term credentials for a role authenticated with SAML

The following assume-role-with-saml example retrieves a set of short-term credentials for the IAM role TestSaml. The request in this example is authenticated by using the SAML assertion supplied by your identity provider when you authenticate to it.

aws sts assume-role-with-saml \
    --role-arn arn:aws:iam::123456789012:role/TestSaml \
    --principal-arn arn:aws:iam::123456789012:saml-provider/SAML-test \
    --saml-assertion "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"

Output:

{
    "Issuer": "https://integ.example.com/idp/shibboleth</Issuer",
    "AssumedRoleUser": {
        "Arn": "arn:aws:sts::123456789012:assumed-role/TestSaml",
        "AssumedRoleId": "ARO456EXAMPLE789:TestSaml"
    },
    "Credentials": {
        "AccessKeyId": "ASIAV3ZUEFP6EXAMPLE",
        "SecretAccessKey": "8P+SQvWIuLnKhh8d++jpw0nNmQRBZvNEXAMPLEKEY",
        "SessionToken": "IQoJb3JpZ2luX2VjEOz////////////////////wEXAMPLEtMSJHMEUCIDoKK3JH9uGQE1z0sINr5M4jk+Na8KHDcCYRVjJCZEvOAiEA3OvJGtw1EcViOleS2vhs8VdCKFJQWPQrmGdeehM4IC1NtBmUpp2wUE8phUZampKsburEDy0KPkyQDYwT7WZ0wq5VSXDvp75YU9HFvlRd8Tx6q6fE8YQcHNVXAkiY9q6d+xo0rKwT38xVqr7ZD0u0iPPkUL64lIZbqBAz+scqKmlzm8FDrypNC9Yjc8fPOLn9FX9KSYvKTr4rvx3iSIlTJabIQwj2ICCR/oLxBA==",
        "Expiration": "2019-11-01T20:26:47Z"
    },
    "Audience": "https://signin.aws.amazon.com/saml",
    "SubjectType": "transient",
    "PackedPolicySize": "6",
    "NameQualifier": "SbdGOnUkh1i4+EXAMPLExL/jEvs=",
    "Subject": "SamlExample"
}

For more information, see Requesting Temporary Security Credentials in the IAM User Guide.

Output

Credentials -> (structure)

The temporary security credentials, which include an access key ID, a secret access key, and a security (or session) token.

Note

The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.

AccessKeyId -> (string)

The access key ID that identifies the temporary security credentials.

SecretAccessKey -> (string)

The secret access key that can be used to sign requests.

SessionToken -> (string)

The token that users must pass to the service API to use the temporary credentials.

Expiration -> (timestamp)

The date on which the current credentials expire.

AssumedRoleUser -> (structure)

The identifiers for the temporary security credentials that the operation returns.

AssumedRoleId -> (string)

A unique identifier that contains the role ID and the role session name of the role that is being assumed. The role ID is generated by Amazon Web Services when the role is created.

Arn -> (string)

The ARN of the temporary security credentials that are returned from the AssumeRole action. For more information about ARNs and how to use them in policies, see IAM Identifiers in the IAM User Guide .

PackedPolicySize -> (integer)

A percentage value that indicates the packed size of the session policies and session tags combined passed in the request. The request fails if the packed size is greater than 100 percent, which means the policies and tags exceeded the allowed space.

Subject -> (string)

The value of the NameID element in the Subject element of the SAML assertion.

SubjectType -> (string)

The format of the name ID, as defined by the Format attribute in the NameID element of the SAML assertion. Typical examples of the format are transient or persistent .

If the format includes the prefix urn:oasis:names:tc:SAML:2.0:nameid-format , that prefix is removed. For example, urn:oasis:names:tc:SAML:2.0:nameid-format:transient is returned as transient . If the format includes any other prefix, the format is returned with no modifications.

Issuer -> (string)

The value of the Issuer element of the SAML assertion.

Audience -> (string)

The value of the Recipient attribute of the SubjectConfirmationData element of the SAML assertion.

NameQualifier -> (string)

A hash value based on the concatenation of the following:

  • The Issuer response value.

  • The Amazon Web Services account ID.

  • The friendly name (the last part of the ARN) of the SAML provider in IAM.

The combination of NameQualifier and Subject can be used to uniquely identify a federated user.

The following pseudocode shows how the hash value is calculated:

BASE64 ( SHA1 ( "https://example.com/saml" + "123456789012" + "/MySAMLIdP" ) )

SourceIdentity -> (string)

The value in the SourceIdentity attribute in the SAML assertion.

You can require users to set a source identity value when they assume a role. You do this by using the sts:SourceIdentity condition key in a role trust policy. That way, actions that are taken with the role are associated with that user. After the source identity is set, the value cannot be changed. It is present in the request for all actions that are taken by the role and persists across chained role sessions. You can configure your SAML identity provider to use an attribute associated with your users, like user name or email, as the source identity when calling AssumeRoleWithSAML . You do this by adding an attribute to the SAML assertion. For more information about using source identity, see Monitor and control actions taken with assumed roles in the IAM User Guide .

The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-

© Copyright 2018, Amazon Web Services. Created using Sphinx.