[ aws . s3api ]

put-bucket-acl

Description

Note

This operation is not supported by directory buckets.

Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs . To set the ACL of a bucket, you must have the WRITE_ACP permission.

You can use one of the following two ways to set a bucket’s permissions:

  • Specify the ACL in the request body
  • Specify permissions using request headers

Note

You cannot specify access permission using both the body and the request headers.

Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.

Warning

If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide .

Permissions

You can set access permissions by using one of the following methods:

  • Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs . Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl . If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL .

  • Specify access permissions explicitly with the x-amz-grant-read , x-amz-grant-read-acp , x-amz-grant-write-acp , and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview . You specify each grantee as a type=value pair, where the type is one of the following:

    • id – if the value specified is the canonical user ID of an Amazon Web Services account
    • uri – if you are granting permissions to a predefined group
    • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Note

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)
    • US West (N. California)
    • US West (Oregon)
    • Asia Pacific (Singapore)
    • Asia Pacific (Sydney)
    • Asia Pacific (Tokyo)
    • Europe (Ireland)
    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.

x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"

You can use either a canned ACL or specify access permissions explicitly. You cannot do both.

Grantee Values

You can specify the person (grantee) to whom you’re assigning access rights (using request elements) in the following ways:

  • By the person’s ID: <Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"><ID><>ID<></ID><DisplayName><>GranteesEmail<></DisplayName> </Grantee> DisplayName is optional and ignored in the request
  • By URI: <Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"><URI><>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<></URI></Grantee>
  • By Email address: <Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"><EmailAddress><>Grantees@email.com<></EmailAddress>&</Grantee> The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.

Note

Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

  • US East (N. Virginia)
  • US West (N. California)
  • US West (Oregon)
  • Asia Pacific (Singapore)
  • Asia Pacific (Sydney)
  • Asia Pacific (Tokyo)
  • Europe (Ireland)
  • South America (São Paulo)

For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

The following operations are related to PutBucketAcl :

See also: AWS API Documentation

Synopsis

  put-bucket-acl
[--acl <value>]
[--access-control-policy <value>]
--bucket <value>
[--content-md5 <value>]
[--checksum-algorithm <value>]
[--grant-full-control <value>]
[--grant-read <value>]
[--grant-read-acp <value>]
[--grant-write <value>]
[--grant-write-acp <value>]
[--expected-bucket-owner <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]

Options

--acl (string)

The canned ACL to apply to the bucket.

Possible values:

  • private
  • public-read
  • public-read-write
  • authenticated-read

--access-control-policy (structure)

Contains the elements that set the ACL permissions for an object per grantee.

Grants -> (list)

A list of grants.

(structure)

Container for grant information.

Grantee -> (structure)

The person being granted permissions.

DisplayName -> (string)

Screen name of the grantee.

EmailAddress -> (string)

Email address of the grantee.

Note

Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

  • US East (N. Virginia)
  • US West (N. California)
  • US West (Oregon)
  • Asia Pacific (Singapore)
  • Asia Pacific (Sydney)
  • Asia Pacific (Tokyo)
  • Europe (Ireland)
  • South America (São Paulo)

For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

ID -> (string)

The canonical user ID of the grantee.

Type -> (string)

Type of grantee

URI -> (string)

URI of the grantee group.

Permission -> (string)

Specifies the permission given to the grantee.

Owner -> (structure)

Container for the bucket owner’s display name and ID.

DisplayName -> (string)

Container for the display name of the owner. This value is only supported in the following Amazon Web Services Regions:

  • US East (N. Virginia)
  • US West (N. California)
  • US West (Oregon)
  • Asia Pacific (Singapore)
  • Asia Pacific (Sydney)
  • Asia Pacific (Tokyo)
  • Europe (Ireland)
  • South America (São Paulo)

Note

This functionality is not supported for directory buckets.

ID -> (string)

Container for the ID of the owner.

JSON Syntax:

{
  "Grants": [
    {
      "Grantee": {
        "DisplayName": "string",
        "EmailAddress": "string",
        "ID": "string",
        "Type": "CanonicalUser"|"AmazonCustomerByEmail"|"Group",
        "URI": "string"
      },
      "Permission": "FULL_CONTROL"|"WRITE"|"WRITE_ACP"|"READ"|"READ_ACP"
    }
    ...
  ],
  "Owner": {
    "DisplayName": "string",
    "ID": "string"
  }
}

--bucket (string)

The bucket to which to apply the ACL.

--content-md5 (string)

The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

--checksum-algorithm (string)

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don’t use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request . For more information, see Checking object integrity in the Amazon S3 User Guide .

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Possible values:

  • CRC32
  • CRC32C
  • SHA1
  • SHA256

--grant-full-control (string)

Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.

--grant-read (string)

Allows grantee to list the objects in the bucket.

--grant-read-acp (string)

Allows grantee to read the bucket ACL.

--grant-write (string)

Allows grantee to create new objects in the bucket.

For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.

--grant-write-acp (string)

Allows grantee to write the ACL for the applicable bucket.

--expected-bucket-owner (string)

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json
  • text
  • table
  • yaml
  • yaml-stream

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on
  • off
  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

  • base64
  • raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

This example grants full control to two AWS users (user1@example.com and user2@example.com) and read permission to everyone:

aws s3api put-bucket-acl --bucket MyBucket --grant-full-control emailaddress=user1@example.com,emailaddress=user2@example.com --grant-read uri=http://acs.amazonaws.com/groups/global/AllUsers

See http://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTacl.html for details on custom ACLs (the s3api ACL commands, such as put-bucket-acl, use the same shorthand argument notation).

Output

None