modify-vpn-tunnel-certificate¶

Description¶

Modifies the VPN tunnel endpoint certificate.

Synopsis¶

  modify-vpn-tunnel-certificate
--vpn-connection-id <value>
--vpn-tunnel-outside-ip-address <value>
[--dry-run | --no-dry-run]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--cli-auto-prompt <value>]

Options¶

--vpn-connection-id (string)

The ID of the AWS Site-to-Site VPN connection.

--vpn-tunnel-outside-ip-address (string)

The external IP address of the VPN tunnel.

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

--cli-auto-prompt (boolean) Automatically prompt for CLI input parameters.

See ‘aws help’ for descriptions of global parameters.

Examples¶

To rotate a VPN tunnel certificate

The following modify-vpn-tunnel-certificate example rotates the certificate for the specified tunnel for a VPN connection

aws ec2 modify-vpn-tunnel-certificate \
    --vpn-tunnel-outside-ip-address 203.0.113.17 \
    --vpn-connection-id vpn-12345678901234567

Output:

{
    "VpnConnection": {
        "CustomerGatewayConfiguration": ...configuration information...,
        "CustomerGatewayId": "cgw-aabbccddee1122334",
        "Category": "VPN",
        "State": "modifying",
        "Type": "ipsec.1",
        "VpnConnectionId": "vpn-12345678901234567",
        "VpnGatewayId": "vgw-11223344556677889",
        "Options": {
            "StaticRoutesOnly": false
        },
        "VgwTelemetry": [
            {
                "AcceptedRouteCount": 0,
                "LastStatusChange": "2019-09-11T17:27:14.000Z",
                "OutsideIpAddress": "203.0.113.17",
                "Status": "DOWN",
                "StatusMessage": "IPSEC IS DOWN",
                "CertificateArn": "arn:aws:acm:us-east-1:123456789101:certificate/c544d8ce-20b8-4fff-98b0-example"
            },
            {
                "AcceptedRouteCount": 0,
                "LastStatusChange": "2019-09-11T17:26:47.000Z",
                "OutsideIpAddress": "203.0.114.18",
                "Status": "DOWN",
                "StatusMessage": "IPSEC IS DOWN",
                "CertificateArn": "arn:aws:acm:us-east-1:123456789101:certificate/5ab64566-761b-4ad3-b259-example"
            }
        ]
    }
}

Output¶

VpnConnection -> (structure)

Describes a VPN connection.

CustomerGatewayConfiguration -> (string)

The configuration information for the VPN connection’s customer gateway (in the native XML format). This element is always present in the CreateVpnConnection response; however, it’s present in the DescribeVpnConnections response only if the VPN connection is in the pending or available state.

CustomerGatewayId -> (string)

The ID of the customer gateway at your end of the VPN connection.

Category -> (string)

The category of the VPN connection. A value of VPN indicates an AWS VPN connection. A value of VPN-Classic indicates an AWS Classic VPN connection.

State -> (string)

The current state of the VPN connection.

Type -> (string)

The type of VPN connection.

VpnConnectionId -> (string)

The ID of the VPN connection.

VpnGatewayId -> (string)

The ID of the virtual private gateway at the AWS side of the VPN connection.

TransitGatewayId -> (string)

The ID of the transit gateway associated with the VPN connection.

Options -> (structure)

The VPN connection options.

EnableAcceleration -> (boolean)

Indicates whether acceleration is enabled for the VPN connection.

StaticRoutesOnly -> (boolean)

Indicates whether the VPN connection uses static routes only. Static routes must be used for devices that don’t support BGP.

TunnelOptions -> (list)

Indicates the VPN tunnel options.

(structure)

The VPN tunnel options.

OutsideIpAddress -> (string)

The external IP address of the VPN tunnel.

TunnelInsideCidr -> (string)

The range of inside IP addresses for the tunnel.

PreSharedKey -> (string)

The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway.

Phase1LifetimeSeconds -> (integer)

The lifetime for phase 1 of the IKE negotiation, in seconds.

Phase2LifetimeSeconds -> (integer)

The lifetime for phase 2 of the IKE negotiation, in seconds.

RekeyMarginTimeSeconds -> (integer)

The margin time, in seconds, before the phase 2 lifetime expires, during which the AWS side of the VPN connection performs an IKE rekey.

RekeyFuzzPercentage -> (integer)

The percentage of the rekey window determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.

ReplayWindowSize -> (integer)

The number of packets in an IKE replay window.

DpdTimeoutSeconds -> (integer)

The number of seconds after which a DPD timeout occurs.

Phase1EncryptionAlgorithms -> (list)

The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The encryption algorithm for phase 1 IKE negotiations.

Value -> (string)

The value for the encryption algorithm.

Phase2EncryptionAlgorithms -> (list)

The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The encryption algorithm for phase 2 IKE negotiations.

Value -> (string)

The encryption algorithm.

Phase1IntegrityAlgorithms -> (list)

The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The integrity algorithm for phase 1 IKE negotiations.

Value -> (string)

The value for the integrity algorithm.

Phase2IntegrityAlgorithms -> (list)

The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The integrity algorithm for phase 2 IKE negotiations.

Value -> (string)

The integrity algorithm.

Phase1DHGroupNumbers -> (list)

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.

(structure)

The Diffie-Hellmann group number for phase 1 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

Phase2DHGroupNumbers -> (list)

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.

(structure)

The Diffie-Hellmann group number for phase 2 IKE negotiations.

Value -> (integer)

The Diffie-Hellmann group number.

IkeVersions -> (list)

The IKE versions that are permitted for the VPN tunnel.

(structure)

The internet key exchange (IKE) version permitted for the VPN tunnel.

Value -> (string)

The IKE version.

Routes -> (list)

The static routes associated with the VPN connection.

(structure)

Describes a static route for a VPN connection.

DestinationCidrBlock -> (string)

The CIDR block associated with the local subnet of the customer data center.

Source -> (string)

Indicates how the routes were provided.

State -> (string)

The current state of the static route.

Tags -> (list)

Any tags assigned to the VPN connection.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode characters.

VgwTelemetry -> (list)

Information about the VPN tunnel.

(structure)

Describes telemetry for a VPN tunnel.

AcceptedRouteCount -> (integer)

The number of accepted routes.

LastStatusChange -> (timestamp)

The date and time of the last change in status.

OutsideIpAddress -> (string)

The Internet-routable IP address of the virtual private gateway’s outside interface.

Status -> (string)

The status of the VPN tunnel.

StatusMessage -> (string)

If an error occurs, a description of the error.

CertificateArn -> (string)

The Amazon Resource Name (ARN) of the VPN tunnel endpoint certificate.

Table of Contents

Feedback

User Guide